Copper & Titanium Products Manufactured
We supply a complete range of copper and titanium materials for industrial applications worldwide, including tubes, bars, plates, sheets, wires, and custom-machined components.
Main Grades
C10100, C11000, C12200, C68700, C70600, C71500, Grade 2, Grade 5 and more.
Standards & Certification
Manufactured to ASTM, ASME, EN, JIS, and GB standards with EN 10204 3.1 MTC and third-party inspection available.
Industries Served
Heat Exchangers, HVAC, Marine, Power, Chemical Processing, Oil & Gas, and Industrial Manufacturing.
Copper & Titanium Product Forms
Copper Products
| Product Form | Typical Standards | Main Grades | Available Forms | Size Range |
|---|---|---|---|---|
| Copper Tubes & Pipes | ASTM B111, ASTM B75, ASTM B88, ASTM B280, EN 12735, EN 12449 | C10100, C10200, C11000, C12000, C12200, C44300, C68700, C70600, C71500 | Straight Length, Coil, Pancake Coil, LWC Coil, U-Bend Tube | OD: 3–300 mm WT: 0.3–20 mm Length: Up to 12 m or custom |
| Copper Plates & Sheets | ASTM B152, ASTM B465, EN 1652 | C10100, C11000, C12200, C17200, C26000, C28000 | Plate, Sheet, Cut-to-Size | Thickness: 0.3–150 mm Width: Up to 1500 mm Length: Custom |
| Copper Bars & Rods | ASTM B187, ASTM B16, ASTM B301 | C11000, C14500, C17200, C18150, C26000, C36000, C93200, C95400 | Round, Flat, Square, Hexagonal | Diameter: 3–500 mm Length: Up to 6 m |
| Copper Strips & Coils | ASTM B152, ASTM B465, EN 1652 | C11000, C12200, C26000, C26800, C27200, C28000 | Strip, Coil, Slit Coil | Thickness: 0.05–5.0 mm Width: 5–1000 mm |
| Copper Wires | ASTM B3, ASTM B33, ASTM B170 | C10100, C10200, C11000 | Round Wire, Flat Wire, Tinned Wire | Diameter: 0.05–20 mm |
| Copper Fittings | ASME B16.22, ASTM B16, EN 1254 | C12200, C36000, CW617N | Elbows, Tees, Couplings, Reducers, Adapters, Unions | 1/4"–4" (DN6–DN100) |
Titanium Products
| Product Form | Typical Standards | Main Grades | Available Forms | Size Range |
|---|---|---|---|---|
| Titanium Tubes & Pipes | ASTM B338, ASTM B861, ASTM B862 | Grade 1, Grade 2, Grade 5, Grade 7, Grade 9, Grade 12 | Seamless Tube, Welded Tube, Straight Length, U-Bend Tube | OD: 3–219 mm WT: 0.3–20 mm Length: Up to 12 m or custom |
| Titanium Plates & Sheets | ASTM B265 | Grade 1, Grade 2, Grade 5, Grade 7, Grade 12 | Plate, Sheet, Cut-to-Size | Thickness: 0.5–100 mm Width: Up to 2000 mm Length: Custom |
| Titanium Bars & Rods | ASTM B348 | Grade 1, Grade 2, Grade 5, Grade 7, Grade 12, Grade 23 | Round, Square, Flat, Hexagonal | Diameter: 3–500 mm Length: Up to 6 m |
| Titanium Strips & Coils | ASTM B265 | Grade 1, Grade 2, Grade 5 | Strip, Coil, Slit Coil | Thickness: 0.05–5.0 mm Width: 10–1000 mm |
| Titanium Wires | ASTM B863 | Grade 1, Grade 2, Grade 5, Grade 23 | Round Wire, Straight Wire, Coil Wire | Diameter: 0.1–10 mm |
| CNC Machined Components | Custom Drawing / ASTM Standards | Grade 2, Grade 5, Grade 23 | Precision CNC Parts, Bushings, Shafts, Sleeves, Flanges, Connectors | Manufactured to customer drawings and specifications |
Applications We Serve
Heat Exchangers
Typical Components
Heat Exchanger Tubes, Tube Sheets, Condensers
Recommended Materials
C12200, C44300, C68700, C70600, C71500, Grade 2
Product Forms
Tubes • Plates • Bars
HVAC & Refrigeration
Typical Components
Refrigeration Pipes, Air Conditioning Systems, Coils
Recommended Materials
C12200, C12000
Product Forms
Tubes • Coils • Fittings
Marine & Shipbuilding
Typical Components
Seawater Cooling Systems, Condensers, Piping Systems
Recommended Materials
C70600, C71500, C68700, Grade 2, Grade 5
Product Forms
Tubes • Pipes • Plates • Bars
Chemical Processing
Typical Components
Reactors, Heat Exchangers, Pressure Vessels, Pipelines
Recommended Materials
Grade 2, Grade 7, Grade 12, C70600
Product Forms
Tubes • Plates • Bars • CNC Parts
Electrical & Power
Typical Components
Busbars, Connectors, Switchgear, Transformer Components
Recommended Materials
C10100, C11000, C14500
Product Forms
Busbars • Bars • Plates • Wires
Oil & Gas
Typical Components
Heat Exchangers, Piping Systems, Valves, Offshore Equipment
Recommended Materials
Grade 2, Grade 5, C70600, C71500
Product Forms
Tubes • Pipes • Bars • CNC Parts
Many industrial projects require both copper and titanium materials across different systems and components. By sourcing from one qualified supplier, you can simplify procurement, maintain consistent quality standards, reduce communication costs, and coordinate production and delivery under a single project schedule.
Manufacturing Capability
Our production facilities support the manufacturing of copper and titanium products with consistent quality, precise dimensions, and reliable performance for industrial applications.
Extrusion Line
Manufacturing copper and titanium bars, tubes, and profiles with high dimensional accuracy.
Hot Rolling Mill
Producing plates, sheets, and strips with excellent mechanical properties.
Cold Drawing Line
Improving dimensional tolerance, surface finish, and mechanical strength for tubes and bars.
Providing controlled heat treatment to achieve the required hardness and material performance.
Precision CNC Machining Center
Manufacturing custom parts according to customer drawings and technical specifications.
Automatic Cutting & Straightening
Ensuring accurate length control and consistent product quality.
Finishing & Polishing
Delivering clean, smooth, and application-ready product surfaces.
Automatic Packaging Line
Protecting products with export-standard packaging for international transportation.
Manufacturing Capabilities
| Capability | Service |
|---|---|
| Processing | Cutting, Turning, Milling, Drilling, Threading, Bending |
| Customization | OEM & Drawing-Based Manufacturing |
| Production | Small Batch & Bulk Orders |
| Tolerance | Manufactured to ASTM, ASME, EN & Customer Specifications |
| Materials | Copper, Brass, Bronze, CuNi, Titanium & Titanium Alloys |
Discuss Your Manufacturing Requirements
Quality Assurance
Every batch is inspected against international standards to ensure material consistency, dimensional accuracy, mechanical performance, and full traceability before shipment.
| Inspection Item | What We Verify |
|---|---|
| Chemical Composition | Verify alloy composition meets ASTM, EN, ASME, JIS, or customer specifications |
| Mechanical Properties | Tensile strength, yield strength, elongation, hardness, and other required properties |
| Dimensional Inspection | Diameter, thickness, width, length, straightness, and machining tolerances |
| Material Identification | PMI verification and heat number traceability for every production batch |
| Surface Quality | Surface finish, defects, cleanliness, and appearance inspection |
| Inspection Documents | EN 10204 3.1 MTC, inspection reports, and third-party certificates available |
Full Material Traceability
EN 10204 3.1 Mill Test Certificate
SGS / BV / TÜV Third-Party Inspection
Inspection Reports Available Upon Request
Export Packaging
Every order is packed according to product type, transportation method, and destination to ensure safe delivery and protect material quality throughout international shipping.
| Packaging Method | Suitable For |
|---|---|
| Wooden Cases | Plates, bars, CNC machined parts, and high-value products |
| Plywood Cases | Export shipments requiring fumigation-free packaging |
| Steel Frame Packaging | Heavy plates, large bars, and oversized materials |
| Protective Film & Plastic Sleeves | Sheets, strips, plates, tubes, and polished surfaces |
| Plastic End Caps | Copper and titanium tubes to prevent contamination and damage |
| Export Pallets & Container Loading | Secured with steel straps and waterproof wrapping for ocean transportation |
Moisture & Corrosion Protection
Impact & Surface Damage Protection
Seaworthy Export Packaging
Product Identification & Traceable Labels
Custom Packaging Available
OEM Labeling & Marking Support
Inventory & Lead Time
A wide range of copper and titanium materials are available in stock or scheduled for regular production, helping customers reduce procurement time and keep projects on schedule.
| Order Type | Typical Lead Time |
|---|---|
| Stock Materials | 3–7 Days |
| Standard Production | 15–25 Days |
| Custom Sizes & CNC Parts | 20–35 Days |
| Large Project Orders | Based on Quantity & Specifications |
Inventory Availability
✔ Copper Tubes, Bars, Plates, Strips & Wires
✔ Titanium Tubes, Bars, Plates, Sheets & Wires
✔ Common ASTM Grades Available
✔ Cut-to-Length Service Available
✔ Mixed Orders of Copper & Titanium Supported
✔ Global Shipping by Sea, Air & Express
Customer Visits
We welcome customers, distributors, and engineering teams from around the world to visit our factory, inspect production processes, verify quality control, and discuss project requirements face to face.
Meet Our Team
Our experienced sales engineers, production specialists, quality inspectors, and export logistics team work together to ensure every order is manufactured, inspected, and delivered according to customer requirements.
FAQ
Can you supply both copper and titanium products in one order?
Yes. We supply a complete range of copper and titanium materials and can consolidate different products into one shipment to simplify procurement and reduce logistics costs.
What international standards do your products comply with?
Our products are manufactured according to ASTM, ASME, EN, DIN, JIS, GB, and other customer-required standards depending on the application.
Can you provide Mill Test Certificates (MTC)?
Yes. EN 10204 3.1 Mill Test Certificates are available for every shipment, along with inspection reports upon request.
Do you support custom sizes and CNC machining?
Yes. We manufacture products according to customer drawings, specifications, and OEM requirements, including precision CNC machining services.
Can third-party inspection be arranged before shipment?
Yes. SGS, BV, TÜV, and customer-designated third-party inspections can be arranged before shipment.
What is your typical lead time?
Stock materials are generally shipped within 3–7 days, while standard production orders usually require 15–25 days depending on product type and quantity.
Which industries do you mainly serve?
Our materials are widely used in heat exchangers, HVAC, marine engineering, power distribution, chemical processing, oil & gas, aerospace, automotive, and industrial manufacturing.
Which countries do you export to?
We supply customers in North America, Europe, Southeast Asia, the Middle East, South America, and other global markets with export-ready packaging and international logistics support.
Can you help us select the right material for our project?
Yes. Our engineering and sales team can recommend suitable alloys, product forms, standards, and manufacturing solutions based on your application, operating conditions, and project requirements.
