ASTM B348 Gr1 Titanium Metal Rod Bar
High quality, in stock, customized products according to your needs, you are welcome to consult.
High quality, in stock, customized products according to your needs, you are welcome to consult.
Titanium produces an oxide skin and a certain thickness of oxygen-rich layer during the production process of billet heating, forging and hot rolling. The oxygen-rich layer is formed by the diffusion and solid solution of oxygen atoms in a high temperature atmosphere. Generally speaking, the oxygen-rich layer destroys plasticity and toughness. Therefore, during the "shot blasting + pickling" process of hot rolled sheet, the surface oxide and oxygen-rich layer needs to be removed. However, the removal of the oxygen-rich layer can lead to a reduction in yield. The low surface hardness and poor wear resistance of titanium limits its use in friction environments. Surface hardening techniques are required. Techniques to improve wear resistance. Oxygen, as a stable element in the alpha phase, is an important interstitial solid solution strengthening element with a high degree of solid solution, forming a certain thickness of oxygen-rich hardening layer near the metal surface. For some parts with high wear resistance requirements and low plasticity and toughness requirements, the oxygen-rich layer can be retained to increase the wear resistance of the part. TA1 is an alpha single-phase structure and TC4 is an alpha + beta two-phase structure. The difference between the two structures affects the composition of the oxide skin and the thickness of the oxygen-rich layer.
|
Standard |
ASTM B348, F67, F136 ASTM 4928 |
|
Material |
Gr.1,2,3,4,7,12;Ti 6Al-4V,Ti 6Al-4V ELI,Ti 3Al-2.5V |
|
Surface Treatment |
Polished,machined,peeled |
|
MOQ |
10 kgs |
|
Payment terms |
T/T or L/C at sight |
|
Diameter |
1.0-500mm |
|
Ti (Min) |
99.50% |
|
Technique |
Rolled , Forged |
|
Length |
equal or less than 6000mm |
|
Density |
4.506-4.516g/cm^3 |
|
Export to |
Europe ,North America,Asia |
FAQ
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 50% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment.or negotiable
Hot Tags: astm b348 gr1 titanium metal rod bar, China astm b348 gr1 titanium metal rod bar manufacturers, suppliers, factory
