Grade 2 Titanium Bar

High quality, with a large stock of titanium rods in various sizes, which can be customised to your requirements.

Titanium Grade 2 has good ductility, which allows for cold formability. To prevent cold forming concerns, the minimum bend radius for material under 0.070″ thick should be 2T, while 2.5T should be used for material over 0.070″. The material can also be easily machined, hot worked and welded. Hot working should be performed between 400°F and 600°F. Stress relieving should be performed by heating to a temperature between 900°F and 1100°F followed by either forced air or slow cooling. Annealing temperatures range from 1200°F to 1400°F for 6 minutes to 2 hours followed by an air cool.
Welding of Grade 2 titanium can be performed using various methods such as MIG and TIG. Inert gas shielding is crucial to prevent oxygen pickup and embrittlement of the weld area. A mixture of argon and helium is typically preferred but should be tested prior to accepting a welding procedure. Preheat or post heat treatments are not required.

Product Description

Product name	AAstm b348 Gr5 metal titanium rod for industry
Standard	ASTM B348/ASME SB348, ASTMF67, ASTM F136
Material	Pure titanium / Titanium alloy
Grade	Gr1  Gr2  Gr3  Gr4  Gr5  Gr6  Gr7  Gr9  Gr11  Gr12  Gr23  Ti15333; BT1-00  BT1-0  BT1-2  BT4-0 etc
Size range	Dia5-350mm*LMax6000mm
Technique	Forging, Machining
Surface	Acid surface, polishing or sand blasted
Shape	Round, flat, square, hexagonal
Application	Metallurgy, electronics, medical, chemical, petroleum, pharmaceutical, aerospace, etc1.Chemical requirements

 

 

 

 

FAQ

Q1. Where is your factory ?

A1: Our company’s processing center is located in TIANJIN ,China

Q2. What are your company's main products ?

A2: Our main products are stainless steel plate/sheet, coil, round/square pipe, bar, channel, etc.

Q3. How do you control quality ?

A3: Mill Test Certification is supplied with shipment, Third Party Inspection is available.

Q4. What are the advantages of your company ?

A4: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.

 Q5. How many coutries you already exported ? 

A5: Exported to more than 50 countries 

 Q6. Can you provide sample ?

 A6: Small samples in store and can provide the samples for free.

    Customized samples will take about 5-7days.

Hot Tags: grade 2 titanium bar, China grade 2 titanium bar manufacturers, suppliers, factory