Copper Sheet

Engravable Brass Sheet Materials

Brass sheet is a widely used copper plate, which has good mechanical properties and good machinability. It can withstand cold and hot pressure processing and is used for various structural parts such

Pure annealed Copper Sheet

Pure copper is a rose red metal, which turns purple after forming a Copper(II) oxide film on its surface. Therefore, industrial pure copper is often called red copper or electrolytic copper. The

Silicon Bronze Sheet and Plate

Even in highly corrosive atmospheric environments, bronze plates form a solid and non-toxic passivation maintenance layer, commonly known as copper green. The Chemical composition of the bronze plate

High Quality Bronze Sheet

Copper plates can also be classified according to different grades, roughly divided into red copper type copper plates, brass type copper plates, bronze type copper plates, and white copper type

All Types Brass Sheet

Brass sheet is actually a high stability and low protection metal material, with significant characteristics such as easy processing, safety, environmental protection, and chemical stability. The

C28300 Coopper Sheet

C58700 Copper Sheet

Copper sheets are available in various grades, each with its own characteristics and applications. The most common grades include:C11000 (also known as Electrolytic Tough Pitch or ETP): This is the

C57300 Copper Sheet

Copper sheets typically have manufacturing tolerances for thickness, width, and length. These tolerances may vary depending on the manufacturer and the specific requirements of the sheet.

C55100 Copper Sheet

Copper sheets can have different surface finishes to suit different applications. The most common finishes include smooth, mill finish (with a slightly rough texture), brushed finish (with visible

C57700 Copper Sheet

Copper sheets are usually made from pure copper, which is referred to as C110 or ETP (Electrolytic Tough Pitch). It is the most common type of copper used in sheet form. There are also various copper

C57800 Copper Sheet

Copper sheets come in standard sizes, such as 4 feet by 8 feet (1.22 meters by 2.44 meters) or 2 feet by 3 feet (0.61 meters by 0.91 meters). However, custom sizes can also be obtained based on

C57100 Copper Sheet

Copper sheets are available in various thicknesses, typically measured in gauge or millimeters (mm). Common thicknesses range from thin foil-like sheets (around 0.05 mm) to thicker sheets used for