Phosphorus-Deoxidized copper tubes – C12200 – are extensively used in sugar refineries for condensers and evaporators. Deoxidized copper is the standard material for transferring heat from steam to water or air because of their excellent resistance to corrosion by fresh water and their high thermal conductivities.
| UNS No. | C12200 – BSI No. C107 – ISO Name Cu-DHP |
| Chemical Comp. (%) | Cu 99.9 / P 0.015N ~ 0.040 |
| ASTM Spec. | B 75, B 111, B 395 |
| ASME Spec. | SB 111, SB 395 |
| Applications | Condenser, evaporator & heat exchanger tubes; Air conditioning & refrigeration; Plumbing pipes & steam tubes. |
| Temper | H55 Light Drawn / H80 Hard Drawn / O61 Annealed |
| Properties * | Metric | English |
| Density | 8.94 g/cm³ | 0.323 lb/in³ |
| Tensile Strength | 221 ~ 379 MPa | 32 ~ 55 ksi |
| Yield Strength | 69 ~ 345 MPa | 10 ~ 50 ksi |
| CTE, linear | 17.7 10-6/°C @ 20.0 – 300 °C | 9.8 10-6/°F @ 70.0 – 570 °F |
| Specific Heat Capacity | 0.0920 cal/g-°C @ 20ºC | 0.0920 BTU/lb-°F @ 70ºF |
| Thermal Conductivity | 339 W/m-K @ 20.0 °C | 196 BTU/ft2/ft/h/°F @ 70.0 °F |
| Melting Point | 1083 °C | 1981 °F |
Standard Specification for Seamless Copper Tube
This specification establishes the requirements for seamless round, rectangular, and square copper tube (UNS Nos. C10100, C10200, C10300, C10800, C12000, and C12200) suitable for general engineering applications. The material of manufacture shall be billets, cast bars, or tube. The tube shall be manufactured by hot- and cold-working processes, shall be cold drawn to the finished size and wall thickness, and shall be supplied in cold-drawn or annealed temper condition. The material shall conform to the chemical composition requirements prescribed for copper, phosphorus, and arsenic, as determined by chemical analysis, and to the mechanical property requirements including tensile strength, yield strength, Rockwell hardness, and straightening. Requirements for grain size, electrical mass resistivity, and dimensions are specified. The following test methods are detailed: grain size, electrical resistivity, tensile and yield strength, and hardness tests, expansion test for round table, microscopical examination, test for hydrogen embrittlement, and nondestructive tests such as electromagnetic (eddy-current), hydrostatic, and pneumatic pressure tests.
1. Scope
1.1 This specification2 establishes the requirements for seamless round, rectangular, and square copper tube suitable for general engineering applications.
1.1.1 Tubes made from any of the following Copper UNS No. designations shall be supplied unless otherwise specified in the contract or purchase order:
|
Copper UNS No. |
Type of Copper |
|
C10100 |
Oxygen-free electronic |
|
C10200 |
Oxygen-free without residual deoxidants |
|
C10300 |
Oxygen-free, extra low phosphorus |
|
C10800 |
Oxygen-free, low phosphorus |
|
C12000 |
Phosphorus deoxidized, low residual phosphorus |
|
C12200 |
Phosphorus deoxidized, high residual phosphorus |
Copper products that GNEE can provide
|
Product Name |
Straight Copper Pipe/Pancake Coil Copper Pipe/Capillary copper pipe |
|
Material |
C10100,C10200,C12000,C12200,C11000,T1,T2,T3,TP2,TU1,TU2,TU3,H62, H65,H70,etc |
|
Standard |
ASTM B280,ASTM B68,ASTM B75,ASTM B88 JIS H3300 EN12735,AS1571 |
|
Shape Type |
Straight Round,Square,Rectangular,Coil,Oval,Half-Round |
|
Wall Thickness |
0.2-3mm |
|
Out Diameter |
3mm-100mm |
|
Length |
1M-6M or As your demand (Pancake copper tube usual length: 15 meters) |
|
Cu |
High Purity 99.9% Copper |
|
Temper |
Soft(M),Half Soft(M2) and Half Hard(Y2) |
|
Surface Treatment |
Bright and Clean |
|
Package Type |
Plastic Film With Plastic Caps on the both ends and Wooden Case Carton Package or as your demand |
|
Application |
Refrigerator,Condenser and Heat Exchange,Decoration,Water Tube,Precision Equipment etc |
|
Item |
Straight copper rod/copper round bar |
||
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Round,Square,Rectangular,etc. |
||
|
Specifications |
Diameter:3~200mm |
||
|
Length |
3m,5.8m, 6m, 11.8m, 12m, or as required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Application |
A copper rod is a type of colored metal processing bar stock with high electrical conductivity. It is mainly divided into brass |
||
|
Contact |
If any requirement please feel free to inform me at any time. |
||
|
Size |
Width: 10mm to 2000mm, |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard. |
||
|
Surface |
Polished,bright,oiled,hair line,brush,mirror,or as required |
||
|
Export to |
Ireland,Singapore,Indonesia,Ukraine,Saudi Arabia,Spain,Canada,USA, |
||
|
Package |
Plastic film with Wooden case or wooden pallet |
||
|
Delivery time |
Prompt delivery or upon your order quantity. |
||
|
Quality Control |
Mill Test Certification is supplied with shipment,Third Part Inspection is acceptable. |
||
|
Application |
widely used inair conditioners,refrigerators,electric,solar water heater, polished pipe an be used in decorative,such as stair rail. |
||
|
Shape |
Round, Square, Oval, can be customized |
||
|
Model Number |
C11000, C10200, C12000, C12200 C26800 C27000 C35000 C38000 etc. |
||
|
Color |
Red Cppper , Brass |
||
|
Hardness |
1/16 hard, 1/8 hard, 3/8 hard, 1/4 hard, 1/2hard, full hard, soft, etc |
||
|
Diameter |
0.10mm-5.00mm |
||
|
Insulation Material |
Enameled |
||
|
Certification |
ISO9001 |
||
|
Advantages |
High conductivity,Good solderability,High ductility |
||
|
Coating |
Double Layer or customized |
||
|
Packing |
Standard export package or seaworthy Package |
||
|
Application |
1. Pancake Coil for ACR, General Engineering Applications |
||
copper CNC machined parts
|
Precision of piece: |
+/-0.01mm |
||
|
Roughness of piece: |
Ra≤0.1 |
||
|
Quality standard: |
DIN, ASTM, GOST, GB, JIS, ANSI, BS; |
||
|
Drawing format: |
JPEG,PDF,AI,PSD,DWG,DXF,IGS,STEP; |
||
|
Products certification: |
ISO9001:2008, CE, RoHS, SGS; |
||
|
Dimension: |
Dia.500mm or 850mm width |
||
|
Available materials |
Steel: carbon steel, alloy steel, stainless steel, 4140,20#,45# ,40Cr,20Cr ,etc |
||
|
Aluminum: AL6061,AL6063,AL6082,AL7075,AL5052 etc. |
|||
|
Stainless steel: 201SS,301SS,304SS,316SS etc. |
|||
|
Brass: C37700,C28000, C11000,C36000 etc |
|||
|
Plastics: PTFE,PEEK,POM,PA,UHMW, NYLON |
|||
|
Surface treatment: |
Steel parts |
Stainless steel parts |
Aluminum parts |
|
Galvanization |
Polishing |
anodized |
|
|
Black oxidation |
Passivation |
Sandblast anodized |
|
|
Nickel plating |
Laser engraving |
Colorful anodized |
|
|
Chrome plating |
Sand blast |
Brushed |
|
|
Heat treatment |
|
Polishing |
|
|
Powder coated |
|
Chrome plating |
|
Why choose us?
Since our establishment in 2008, our company has specialized in the production and export of copper products. We utilize advanced production lines and a comprehensive quality control system. From raw materials to finished products, every step is rigorously inspected using precision instruments (such as spectrometers, metallographic microscopes, and conductivity testers) to ensure that our products meet international standards for composition, dimensions, and performance. We are committed to providing high-quality, high-precision copper products and reliable service to our global customers.
Email:sales@gneesteel.com
active members
years experience
Square Meters Built
Cooperating Partner
