CuCr1-C ( CC140C )
| Grade : | CuCr1-C |
| Number: | CC140C |
| Classification: | Copper-chromium alloy |
| Standard: | EN 1982: 2008 Copper and copper alloys. Ingots and castings |
| Equivalent grades: | Go here |
Chemical composition % of grade CuCr1-C ( CC140C )
| Cr | - |
| 0.4 - 1.2 | Cu+Cr > 99.5; Cu - remainder |
Mechanical properties of grade CuCr1-C ( CC140C )
| Rm - Tensile strength (MPa) (GS) or (GM) | 300 |
| Rp0.2 0.2% proof strength (MPa) (GS) or (GM) | 200 |
| A - Min. elongation at fracture (%) (GS) or (GM) | 10 |
| Brinell hardness (HBW): | 95 |
Properties CuCr1-C
| Electrical conductivity (GS) or (GM) = MS/m; |
Equivalent grades of grade CuCr1-C ( CC140C )
Warning! Only for reference
| EU EN |
Germany DIN,WNr |
||
| CuCr1-C |
|
Casting process
| GS | Sand casting |
| GM | Permanent mould casting |
| GZ | Centrifugal casting |
| GC | Continuous casting |
| GP | Pressure die casting |
Material conditions
| R | Material condition designated by the minimum value of tensile strength requirement for the product with mandatory tensile strength and elongation requirements |
| H | Material condition designated by the minimum value of hardness requirement for the product with mandatory hardness requirements |
Mechanical properties
| ReH | Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale |
| Rm | Tensile strength / Zugfestigkeit / Resistance a la traction |
| A | Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal |
| J | Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc |
|
CuCr1-C ( CC140C ) Copper-chromium alloy |
