CuSn5Pb9-C ( CC494K )
| Grade : | CuSn5Pb9-C |
| Number: | CC494K |
| Classification: | Copper-tin-lead alloy |
| Standard: | EN 1982: 2008 Copper and copper alloys. Ingots and castings |
| Equivalent grades: | No information |
Chemical composition % of grade CuSn5Pb9-C ( CC494K )
| A suffix -C is added to the designation to identify material in the form of castings |
| Fe | Si | Mn | Ni | P | S | Al | Cu | Pb | Zn | Sb | Sn | - |
| max 0.25 | max 0.01 | max 0.2 | max 2 | max 0.1 | max 0.1 | max 0.01 | 80 - 87 | 8 - 10 | max 2 | max 0.5 | 4 - 6 | Cu including Ni |
Mechanical properties of grade CuSn5Pb9-C ( CC494K )
| Rm - Tensile strength (MPa) (GS) | 160 |
| Rm - Tensile strength (MPa) (GM) | 200 |
| Rm - Tensile strength (MPa) (GZ) | 200 |
| Rm - Tensile strength (MPa) (GC) | 200 |
| Rp0.2 0.2% proof strength (MPa) (GS) | 60 |
| Rp0.2 0.2% proof strength (MPa) (GM) | 80 |
| Rp0.2 0.2% proof strength (MPa) (GZ) | 90 |
| Rp0.2 0.2% proof strength (MPa) (GC) | 100 |
| A - Min. elongation at fracture (%) (GS) | 7 |
| A - Min. elongation at fracture (%) (GM) | 5 |
| A - Min. elongation at fracture (%) (GZ) | 6 |
| A - Min. elongation at fracture (%) (GC) | 9 |
| Brinell hardness (HBW): (GS) | 55 |
| Brinell hardness (HBW): (GM) or (GZ) or (GC) | 60 |
Casting process
| GS | Sand casting |
| GM | Permanent mould casting |
| GZ | Centrifugal casting |
| GC | Continuous casting |
| GP | Pressure die casting |
Material conditions
| R | Material condition designated by the minimum value of tensile strength requirement for the product with mandatory tensile strength and elongation requirements |
| H | Material condition designated by the minimum value of hardness requirement for the product with mandatory hardness requirements |
Mechanical properties
| ReH | Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale |
| Rm | Tensile strength / Zugfestigkeit / Resistance a la traction |
| A | Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal |
| J | Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc |
|
CuSn5Pb9-C ( CC494K ) Copper-tin-lead alloy |
