CuZn35Pb2 ( CW601N )
| Grade : | CuZn35Pb2 |
| Number: | CW601N |
| Classification: | Copper-zinc-lead alloy |
| Density | 8.5 g/cm ³ |
| Standard: | EN 12164: 1998 Copper and copper alloys. Rod for free machining purposes EN 12166: 1998 Copper and copper alloys. Wire for general purposes EN 12167: 1998 Copper and copper alloys. Profiles and rectangular bar for general purposes EN 12168: 1998 Copper and copper alloys. Hollow rod for free machining purposes EN 12449: 1999 Copper and copper alloys. Seamless, round tubes for general purposes |
| Equivalent grades: | Go here |
Chemical composition % of grade CuZn35Pb2 ( CW601N )
| Fe | Ni | Al | Cu | Pb | Sn | Others | - |
| max 0.1 | max 0.3 | max 0.05 | 62 - 63.5 | 1.6 - 2.5 | max 0.1 | total 0.1 | Zn - remainder |
Mechanical properties of grade CuZn35Pb2 ( CW601N )
| Rm - Tensile strength (MPa) (R370) | 370 |
| Rm - Tensile strength (MPa) (R440) | 440 |
| Rp0.2 0.2% proof strength (MPa) (R370) | 180-250 |
| Rp0.2 0.2% proof strength (MPa) (R440) | 340 |
| A - Min. elongation at fracture (%) (R370) | 25-30 |
| A - Min. elongation at fracture (%) (R440) | 14 |
| A - Min. elongation Lo = 100mm (%) (R370) | 16 |
| A - Min. elongation Lo = 100mm (%) (R440) | 10 |
| Brinell hardness (HB): (R370) | 90 - 110 |
| Brinell hardness (HB): (R440) | 130 |
Equivalent grades of grade CuZn35Pb2 ( CW601N )
Warning! Only for reference
| EU EN |
Germany DIN,WNr |
||
| CuZn35Pb2 |
|
Casting process
| GS | Sand casting |
| GM | Permanent mould casting |
| GZ | Centrifugal casting |
| GC | Continuous casting |
| GP | Pressure die casting |
Material conditions
| R | Material condition designated by the minimum value of tensile strength requirement for the product with mandatory tensile strength and elongation requirements |
| H | Material condition designated by the minimum value of hardness requirement for the product with mandatory hardness requirements |
Mechanical properties
| ReH | Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale |
| Rm | Tensile strength / Zugfestigkeit / Resistance a la traction |
| A | Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal |
| J | Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc |
|
CuZn35Pb2 ( CW601N ) Copper-zinc-lead alloy |
