CuZn39Pb3 ( CW614N )
| Grade : | CuZn39Pb3 |
| Number: | CW614N |
| Classification: | Copper-zinc-lead alloy |
| Density | 8.4 g/cm ³ |
| Standard: | EN 12164: 1998 Copper and copper alloys. Rod for free machining purposes EN 12166: 1998 Copper and copper alloys. Wire for general purposes EN 12167: 1998 Copper and copper alloys. Profiles and rectangular bar for general purposes EN 12168: 1998 Copper and copper alloys. Hollow rod for free machining purposes EN 12165: 1998 Copper and copper alloys. Wrought and unwrought forging stock EN 12449: 1999 Copper and copper alloys. Seamless, round tubes for general purposes EN 12420: 1999 Copper and copper alloys. Forgings |
| Equivalent grades: | Go here |
Chemical composition % of grade CuZn39Pb3 ( CW614N )
| Fe | Ni | Al | Cu | Pb | Sn | Others | - |
| max 0.3 | max 0.3 | max 0.05 | 57 - 59 | 2.5 - 3.5 | max 0.3 | total 0.2 | Zn - remainder |
Mechanical properties of grade CuZn39Pb3 ( CW614N )
| Rm - Tensile strength (MPa) (R380) | 380 |
| Rm - Tensile strength (MPa) (R430) | 430 |
| Rp0.2 0.2% proof strength (MPa) (R380) | 160 |
| Rp0.2 0.2% proof strength (MPa) (R430) | 250 |
| A - Min. elongation at fracture (%) (R380) | 18 |
| A - Min. elongation at fracture (%) (R430) | 10 |
| A - Min. elongation Lo = 100mm (%) (R430) | 6 |
| Brinell hardness (HB): (R380) | 90 |
| Brinell hardness (HB): (R430) | 120 |
Properties CuZn39Pb3
| Group A. This alloy have excellent machinability, but very limited cold workability |
Equivalent grades of grade CuZn39Pb3 ( CW614N )
Warning! Only for reference
| EU EN |
Germany DIN,WNr |
Russia GOST |
|||
| CuZn39Pb3 |
|
|
Casting process
| GS | Sand casting |
| GM | Permanent mould casting |
| GZ | Centrifugal casting |
| GC | Continuous casting |
| GP | Pressure die casting |
Material conditions
| R | Material condition designated by the minimum value of tensile strength requirement for the product with mandatory tensile strength and elongation requirements |
| H | Material condition designated by the minimum value of hardness requirement for the product with mandatory hardness requirements |
Mechanical properties
| ReH | Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale |
| Rm | Tensile strength / Zugfestigkeit / Resistance a la traction |
| A | Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal |
| J | Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc |
|
CuZn39Pb3 ( CW614N ) Copper-zinc-lead alloy |
