Characteristics of C10100 Oxygen Free High Conductivity copper are:
High Ductility
High Electrical & Thermal Conductivity
High Impact Strength
Good Creep Resistance
Ease of Welding
Low Relative Volatility under high vacuum
C10100 Ofhc Copper Typical Uses
Transistor Component Bases,
High Resistance-Ratio Cryogenic Shunts,
Bus Conductors,
Wave Guides,
Hollow Conductors,
Anodes for Vacuum Tubes,
Coaxial Cable,
Coaxial Tube,
Klystrons,
Microwave Tubes,
Bus Bars,
Lead-in Wire,
Vacuum Seals,
Conductors,
Glass-to-Metal Seals
C10100 Chemical Composition
| Cu(1) | Sb | As | O | P | Te | |
| Min./Max. | 99.99 min | .0004 | .0005 | .0005 | .0003 | .0002 |
| Nominal | - | - | - | - | - | - |
C10100 Mechanical Properties
| Temper | Section Size |
Cold Work |
Typ/ Min |
Temp | Tensile Strength |
Yield Strength (0.5% ext. under load) |
Yield Strength (0.2% offset) |
Yield Strength (0.05% offset) |
El | Rockwell Hardness |
Vickens Hard. |
Brinell Hard. |
Shear Strength |
Fatigue Strength* |
Izod Impact Strength |
||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| in. | % | F | ksi | ksi | ksi | ksi | % | B | C | F | 30T | 500 | 500 | 3000 | ksi | ksi | ft-lb | ||
| mm. | C | MPa | MPa | MPa | MPa | MPa | MPa | J | |||||||||||
| Tube | |||||||||||||||||||
| H80 | 0.065 | 0 | TYP | 68 | 55 | 50 | - | - | 8 | 60 | - | 95 | 63 | - | - | - | 29 | - | 0.0 |
| 1.65 | 20 | 379 | 345 | - | - | 8 | 60 | - | 95 | 63 | - | - | - | 200 | - | 0.0 | |||
| Flat Products | |||||||||||||||||||
| M20 | 0.25 | 0 | TYP | 68 | 32 | 10 | - | - | 50 | - | - | 40 | - | - | - | - | 22 | - | 0.0 |
| 6.35 | 20 | 221 | 69 | - | - | 50 | - | - | 40 | - | - | - | - | 152 | - | 0.0 | |||
| H04 | 0.25 | 0 | TYP | 68 | 50 | 45 | - | - | 12 | 50 | - | 90 | - | - | - | - | 28 | - | 0.0 |
| 6.35 | 20 | 345 | 310 | - | - | 12 | 50 | - | 90 | - | - | - | - | 193 | - | 0.0 | |||
| H02 | 0.04 | 0 | TYP | 68 | 42 | 36 | - | - | 14 | 40 | - | 84 | 50 | - | - | - | 26 | 13 | 0.0 |
| 1 | 20 | 290 | 248 | - | - | 14 | 40 | - | 84 | 50 | - | - | - | 179 | 90 | 0.0 | |||
| Rod | |||||||||||||||||||
| M20 | 1 | 0 | TYP | 68 | 32 | 10 | - | - | 55 | - | - | 40 | - | - | - | - | 22 | - | 0.0 |
| 25.4 | 20 | 221 | 69 | - | - | 55 | - | - | 40 | - | - | - | - | 152 | - | 0.0 | |||
| Flat Products | |||||||||||||||||||
| H04 | 0.04 | 0 | TYP | 68 | 50 | 45 | - | - | 6 | 50 | - | 90 | 57 | - | - | - | 28 | 13 | 0.0 |
| 1 | 20 | 345 | 310 | - | - | 6 | 50 | - | 90 | 57 | - | - | - | 193 | 90 | 0.0 | |||
| Rod | |||||||||||||||||||
| H04 | 0.25 | 40 | TYP | 68 | 55 | 50 | - | - | 10 | 60 | - | 94 | - | - | - | - | 29 | - | 0.0 |
| 6.35 | 20 | 379 | 345 | - | - | 10 | |||||||||||||
about GNEE
why choose our products
Our company is equipped with advanced production lines capable of extruding, drawing, refining, and processing copper rods, copper tubes, copper busbars, and special-shaped copper products. To ensure every single product meets international standards, we have established a comprehensive quality control center. This center is furnished with a range of high-precision testing equipment, including spectrometers, metallurgical microscopes, universal material testing machines, and conductivity testers. This allows us to perform rigorous checks on raw materials, semi-finished, and finished products, covering chemical composition, physical properties, and non-destructive testing.
If you need any help, please contact us immediately:sales@gneesteel.com
Other product forms provided by GNEE
|
Material |
Brass:C21000,C22000,C22600,C23000,C24000,C26000,C26130,C26800,C27000,C27200,C27400, C2800,H59,H62,H70,H65,H80,H90,CuZn30,CuZn37,CuZn35,CuZn40,etcLeaded |
|
Diameter |
1/4",3/8",1/2", 5/8", 7/8" or customized |
|
Thickness |
0.5/0.6/0.7/0.8/1 or Customized |
|
Length |
15m/50ft or customized |
|
Standard |
JIS,AISI,ASTM,GB,DIN,EN |
|
Price Term |
x-Work,FOB,CNF,CFR,CIF,FCA,DDP,DDU,etc |
|
Payment Term |
TT,L/C,Western Union,D/P,etc |
|
Application |
refrigeration,installation of air conditioner,construction water and gas |
|
Package |
Standard export package,suit for all kinds of transport,or as required. |
|
Material |
Copper, Brass, Bronze and special copper alloy |
|
|
Grade |
ASTM |
C10100,C11000,C12200,C21000,C22000,C23000,C24000,C26000, |
|
G/B |
TU1,T2,TP2,H96,H90,H85,H80,H70,H65,H63,H62,H59,HPb63-3, |
|
|
JIS |
C 1011,C 1100,C 1220,C3604,C 2100,C 2200,C 2300,C 2400, C 2600, |
|
|
BS |
Cu-OFE,C 101,Cu-DHP,CZ 125,CZ 101,CZ 102,CZ 103,CZ 106,CZ 107, CZ 108,CZ 109,CZ 123,CZ 124, CZ 121,CZ 111,CZ 133, Pb 104, |
|
|
DIN/ISO |
CuZn5,CuZn10,CuZn15,CuZn20,CuZn30,CuZn35,CuZn33,CuZn36, |
|
|
Shape |
Round, Square, Flat, Hexagon, Oval, Half-round or Customized |
|
|
Dimension |
Bar/Rod |
Standard(Diameter 5-160 mm) or Customized |
|
Wire |
Standard(Diameter 0.02-6 mm) or Customized |
|
|
Plate/Sheet |
Standard(T 0.2-50 mm/W 200-3000 mm/L 6000 mm) or Customized |
|
|
Strip |
Standard(T 0.05-1.5 mm/W 20-600 mm/L 20000 mm) or Customized |
|
|
Tube/Pipe |
Standard(OD 3-360mm/Wall thickness 0.5-50 mm) or Customized |
|
|
Standard |
GB/T,JIS,ASTM, ISO, DIN, BS, NF etc. |
|
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard. |
|
|
Package |
Plastic film + Wooden case or as per customer requirement |
|
|
Surface |
Polished,bright,oiled,hair line,brush,mirror,or as required |
|
|
Deliver time |
According to order's quantity. |
|
|
Shipment |
By sea, by air, DHL, UPS, FedEx etc. or as required |
|
|
Application |
Electric light industry, machinery manufacturing, Building industry ,defense industry, and other fields Manufacturing industrial |
|
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Square,Rectangular,etc. |
||
|
Specifications |
Diameter:3~200mm |
||
|
Length |
3m,5.8m, 6m, 11.8m, 12m, or as required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Export to |
Singapore,Indonesia,Ukraine,Korea,Thailand, Vietnam, Saudi Arabia, Brazil, Spain, |
||
|
Application |
Copper plates are mainly used in electrical conductivity, heat conduction, and corrosion-resistant equipment. For instance, they are applied in wires, cables, conductive screws, blasting detonators, evaporators for chemical industries, storage containers, and various pipelines, etc. They can also be used as force-bearing parts for various deep drawing and bending manufacturing processes, such as pins, rivets, washers, nuts, conduits, pressure gauges, screens, and radiator parts, etc. |
||
|
Contact |
If any requirement please feel free to inform me at any time. |
||
|
Grade |
C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920, C10930,C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300, C12500,C14200,C14420,C14500,C14510,C14520,C14530,C17200,C19200, C21000,C23000,C26000,C27000,C27400,C28000,C33000,C33200,C37000, C44300,C44400,C44500,C60800,C63020,C65500,C68700,C70400,C70620, C71000,C71500,C71520,C71640,C72200,T1,T2,T3,etc |
|
Standard |
JIS ASTM DIN EN ISO |
|
Diameter |
0.3-5mm/custom |
|
Length |
custom |
|
Surface |
mill,polished,bright,mirror,hair line,brush,checkered,antique,sand blast,etc |
|
Application |
Building, industry etc |
|
Payment Terms |
T/T or L/C at sight |
|
Delivery time |
5-15 days after receiving L/C or deposit |
|
Remark |
Specific requirement of alloy grade,temper or specification can be discussed at your request |
