Gnee Steel (Tianjin) Co., Ltd.

C28000 Brass Prices — Week Of November 16, 2026

Nov 16, 2026

What Is C28000 Brass?

C28000 (Muntz metal, UNS C28000) is nominally 60% copper, 40% zinc - the strongest of the straight copper-zinc alloys at hot-working temperature, and historically the ship-plating brass: copper content chosen at 60% to be cheaper than the copper sheathing it replaced, zinc pushed as high as hot ductility allows. Today it lives in condenser tube sheets, heat-exchanger headers and large hot-pressed sections - built around our heat exchanger tube program - usually as the drill-and-bore partner to copper-nickel or aluminium-brass tubing. Its two operating limits define every purchase decision in this article: no lead, so machinability is roughly 30% of free-machining brass; and 40% zinc, so stagnant chloride water is a dezincification risk that stops it being a drop-in for naval brass or inhibited aluminium brass.

 

Price Snapshot - The Market Background

Copper slipped to $14,190/tonne ($6.44/lb). Zinc kept its run: $3,412/tonne, up 4.4% this week. In melt terms the copper leg is $3.864/lb and the zinc leg $0.619/lb - the zinc leg is 13.8% of melt value but 138% of this week's move. Form prices, which lag melt by two to four weeks, have only started to catch up: tube-sheet plate printed $7.05/kg, up 0.9%, with bar and sheet following.

news-881-472

 

Table 1 - C28000 price snapshot, week of November 16, 2026

Item Value Unit Weekly move Why it matters
C28000 melt value 4.483 USD / lb +0.014 / +0.31% Two down weeks erased in one
Copper leg (LME 14,190) 3.864 USD / lb −0.012 The visible, negotiable leg
Zinc leg (3,412) 0.619 USD / lb +0.026 / +4.4% 138% of the move; 8 gains in 10 weeks
C28000 tube-sheet plate, hot-rolled (ASTM B171) 7.05 USD / kg +0.06 / +0.9% Catch-up leg just starting
C28000 bar / rod (ASTM B121) 7.42 USD / kg +0.05 / +0.7% Small lots, slowest to reprice
C28000 sheet / strip (ASTM B36) 7.18 USD / kg +0.04 / +0.6% Cold-rolled book steady
C28000 forging block 7.85 USD / kg +0.06 / +0.8% Cheapest large-section Cu alloy this week
Melt premium over C11000 −1.98 USD / lb from −1.95 Gap narrowing as zinc climbs

Melt = Cu×0.60 + Zn×0.40. Form prices include conversion and mill margin; plate is the tube-sheet reference form.

 

Last Week's Dip Was Copper, Not Brass

The melt series tells the story in one line: $4.508 (Nov 2) → $4.469 (Nov 9) → $4.483 (Nov 16). Buyers who read last week's dip as "brass softening" saw copper fall $0.09/lb and assumed the whole alloy followed. The zinc leg did the opposite - up $0.064/lb in the same fortnight. That divergence is why a fixed-price window on C28000 is riskier than the same window on C11000: copper's leg is transparent and slow, zinc's leg is the one that moves while you wait for approval.

news-877-466

 

What A C28000 Quote Is Actually Made Of

On a 3-tonne tube-sheet release at $7.05/kg, metal is $4.55/kg - 65% of price and the only line that never amortises. Conversion ($1.55/kg), ultrasonic and certification ($0.42 at 500 kg → $0.21 at 10 t), packaging ($0.28 → $0.19) and margin complete it: the ladder runs $7.36/kg at 500 kg, $7.05 at 3 t, $6.88 at 10 t. Above 10 t nothing else shrinks - negotiate metal timing, not conversion. The line worth attention is what does not appear in the metal figure: your own machining cost, which this alloy inflates.

news-872-465

 

The Machining Line Nobody Prices

C28000 machinability is ~30% against C36000's 100% - no lead, stringy chips, slow feeds. On a typical 40 mm tube sheet with 380 drilled and bored holes, that is roughly $185 more machining per sheet than the same drawing in C36000, and about $90 more than leaded Muntz C36500. Over a 12-sheet condenser retube, the machining delta is $2,220 - larger than the melt saving over C36500 on the same tonnage. The arithmetic that settles it:

 

Table 2 - Tube sheet alloy comparison (40 mm thick, 380 holes, 12 sheets)
Option Plate (USD/kg) Machining (USD/sheet) 12-sheet total Trade-off
C28000 7.05 +185 vs C36000 Lowest material, highest machining Hot-pressed blanks, strength
C36500 (leaded Muntz) 7.21 +95 $95/sheet cheaper overall Lead content - check potable-water rules
C36000 (free-machining) 7.58 baseline Reference Weaker hot section, 61.5% Cu
C46400 (naval brass) 7.66 +105 Higher Pays only in dezincification service

C46400's tin addition is a corrosion upgrade, not a strength one - it costs about $0.61/kg over C28000 and earns it only where water sits: stagnant cooling loops, stand-by condensers, tube sheets paired with aluminium brass in harbour service. For flowing seawater with Cu-Ni tubing, C28000 is the correct and cheaper call - specifying C46400 "to be safe" on a 12-sheet package costs roughly $6,400 for a risk that the flowing system does not carry.

 

What Is The C28000 Equivalent Grades Map?

The purchase order should carry UNS C28000; the equivalents decide which certificate rows and which test plan arrive with the heat.

 

Table 3 - C28000 equivalent designations
System Designation Notes
UNS C28000 The universal key - put it on the RFQ
ASTM B36 (sheet/strip/plate), B121 (bar/rod/shapes) B171 covers plate ≥ 3 mm for tube sheets
EN / DIN CuZn40 (2.0360) Same chemistry; EN 10204 3.1 default
ISO CuZn40 Heat-exchanger plate route
JIS C2800 (H3100/H3250) Sheet and bar ranges differ - quote the symbol
GB / China H59 (GB/T 5231) Close, not identical - require actual Cu, Zn, Pb, Fe values
Related C36500 (leaded Muntz), C46400 (naval brass) C46400 adds Sn for dezincification - a service decision, not a default upgrade

Two traps cover most rejections. GB H59's impurity rows are written differently, so a heat can pass GB/T and miss ASTM B36 - demand actual values on the 3.1 certificate. And never let a C46400 or C44300 quote substitute silently for a C28000 drawing: both are legitimate upgrades in stagnant service, but both cost more per kilo, and a quote that swaps grades without a written deviation note should be rejected on the paper alone.

 

Volume Breaks, Lead Time And The RFQ Lines That Cost Nothing

Volume: ladder ends at 10 t (plate $7.36 → $6.88/kg). Hot-pressed blanks price better than machined-from-plate above 20 sheets - ask for the blank quote.

Lead time: hot-rolled plate 6–9 weeks; bar 5–8; sheet 4–6; forging blocks 8–12. The hot-rolling queue, not metal supply, is the constraint this month.

Write into every RFQ: "actual Cu, Zn, Pb, Fe on the EN 10204 3.1 certificate", "zinc leg stated as fixed USD/lb or re-opened only beyond ±3%", and UNS C28000 beside the grade name.

Fix ten-day validity - with zinc moving 4% in a week, a 30-day open quote is a short option you are selling for free.

 

Three Decisions Worth Money This Week

Split the quote by leg. Ask for copper on LME+, zinc as a fixed USD figure - the same split-leg structure that protects copper-nickel buyers works here, and with zinc the only moving leg, it caps nearly all of the risk.

Price the machining before the alloy. If the drawing has more than ~150 holes per sheet, run the C36500 comparison - on this week's numbers it is $95/sheet cheaper in total wherever lead content is acceptable.

Book tube-sheet blanks for Q1 now. Zinc momentum plus a full hot-rolling queue both point up; a booking fee on melt slots beats re-quoting into a wider catch-up leg.

 

Where These Numbers Could Reverse

Zinc is the whole story. A break back under $3,200/tonne unwinds the catch-up leg fast - form prices would ease within a fortnight, before copper moves at all.

Copper under $14,000/tonne would drag every melt leg down together; C28000 falls least because copper is only 60% of it - which is exactly why it was invented.

The hot-rolling queue clearing is the conversion-side discount to watch; metal gets the headlines, conversion pays the relief.

 

C28000 Product Range And Specifications

Table 4 - C28000 product range
Product Standard Range Condition
Brass plate ASTM B36 / B171 3–80 mm; width to 1,500 mm; length to 6,000 mm Hot-rolled, annealed, pickled
Brass sheet / strip ASTM B36 0.3–12 mm; width to 1,000 mm Hot or cold-rolled, annealed
Brass bar / rod ASTM B121 Ø 8–150 mm; hex & square on request Hot-rolled, turned or ground
Hot-pressed blanks To drawing Tube sheets, headers, blocks to 2,000 kg Hot-pressed, rough-machined or as-pressed
Forging blocks ASTM B121 To 300 mm section Forged, annealed, rough machined
Melting & testing Induction melt, hot working to 750 °C class; EN 10204 3.1 standard, 3.2 with witness available; full analysis with actual Cu, Zn, Pb, Fe; ultrasonic on tube-sheet stock

Sourcing tube sheets or hot-pressed blanks this quarter? Send the drawing and annual quantity and we will quote copper leg and zinc leg as separate, stated USD figures, run the C36500 machining comparison before you commit, and book the hot-rolling slot at purchase order. Plate, sheet, bar, blanks and forgings, ASTM B36 / B121 / B171 and EN CuZn40 equivalents.

Request a C28000 Quote

goTop