Price Snapshot - C12200 (DHP Copper), Week of November 9, 2026
| Indicator | Reading | Unit | vs. prior week | Direction |
|---|---|---|---|---|
| LME 3-month copper (settle) | 14,240 | USD / tonne | +60 / +0.42% | Stabilizing |
| LME copper (settle) | 6.46 | USD / lb | +0.03 | Two-week net decline: −0.10 |
| US cathode premium (ref.) | 0.098 | USD / lb | +0.006 | Third straight weekly gain |
| Phosphorus-deoxidation charge (P 0.015–0.040%) | 0.07 | USD / lb | flat | Unchanged five weeks running |
| C12200 melt reference value | 6.53 | USD / lb | −0.09 over two weeks | Full copper pass-through |
| C11000 melt reference value | 6.55 | USD / lb | −0.07 over two weeks | Cathode premium absorbs part of drop |
| DHP premium over C11000 (quotes) | 0.02 | USD / lb | −0.03 | Parity on B88 and B447 tube |
| C12200 plate (ASTM B152, 3–50 mm) | 8.35–10.15 | USD / lb | −0.05 | Melt pass-through |
| C12200 sheet (ASTM B152, 0.5–6 mm) | 8.65–10.55 | USD / lb | −0.05 | Melt pass-through |
| C12200 strip / coil (0.1–3 mm) | 8.85–10.85 | USD / lb | −0.05 | Rolling slots open |
| C12200 bus bar (ASTM B187) | 8.15–9.95 | USD / lb | −0.05 | Weakest demand line |
| C12200 bar / rod (ASTM B187) | 8.35–10.25 | USD / lb | −0.05 | Melt pass-through |
| C12200 seamless tube (ASTM B75) | 9.15–11.35 | USD / lb | −0.04 | Mixed with ACR pull |
| C12200 water tube (ASTM B88, K / L / M) | 9.35–11.55 | USD / lb | −0.05 | Parity with C11000 plumbing tube |
| C12200 ACR tube (ASTM B280) | 10.25–12.65 | USD / lb | +0.04 | Lead time 6–9 weeks (+1 wk) |
| C12200 capillary tube (ASTM B743) | 11.05–13.65 | USD / lb | +0.05 | Thin-wall draw capacity rationed |
| C12200 medical-gas tube (ASTM B819) | 11.45–14.05 | USD / lb | +0.06 | Largest single line this week |
| C12200 welded tube (ASTM B447) | 8.75–10.85 | USD / lb | −0.05 | Below seamless by $0.40–0.50 |

The Fastest Pass-Through In The Family, Verified Over Two Weeks
On October 26 we wrote that C12200's melt tracks LME copper one-for-one, because a 99.9% copper with a fixed phosphorus charge has nothing between the exchange price and the invoice. The two weeks since have been the test. LME copper fell a net $0.10/lb from October 26 to November 9; the C12200 melt reference fell $0.09/lb - a 90% capture rate, verified. Over the same window, C11000's melt fell $0.07: the US cathode premium rose from $0.092 to $0.098/lb and absorbed part of the metal decline. On the quote level the split is starker - C11000 buyers have seen 48% of the drop; C12200 buyers have seen all of it.
| Component of the two-week move | USD / lb | Where it stands |
|---|---|---|
| LME copper, Oct 26 → Nov 9 | −0.100 | Exchange-settled |
| C12200 melt reference move | −0.090 | 90% captured at melt; quotes follow within days |
| C11000 melt reference move | −0.070 | Cathode premium +0.014 absorbed the rest |
| Phosphorus-deoxidation charge | 0.000 | Flat five weeks - no cost creep on DHP |
| Remaining October-inventory relief in C12200 quotes | −0.02 to −0.04 | Lands by early December as high-cost cathode clears |
The practical reading: most of this copper decline is already in your C12200 quotes. Unlike the brass grades, where mills sit on two-to-four-week lags, DHP tube and flat-rolled lines repriced within days of each LME settle. Waiting another month buys at most $0.02–0.04/lb more - $200–400 on a 10,000 lb plate order, worth having if the delivery date allows, worth nothing if a line-down event costs a day.
The DHP Premium Over C11000 Has Almost Vanished
This is the structural story of the week. The DHP premium over C11000 ran $0.14/lb in late September, compressed to $0.05 by October 26, and now prints $0.02 across the board - $0.00 on B88 water tube and B447 welded tube. The mechanism is one-directional: C11000 quotes ride the cathode premium, up three straight weeks to $0.098/lb with no sign of easing before year-end; C12200 quotes ride the metal, which just fell. Every cent the cathode premium gains, only C11000 gets more expensive.

For buyers this flips a habit. Most plumbing, HVAC and medical-gas drawings specify C11000 by default - then pay again when a brazed joint forces a deoxidized substitute. This week the arithmetic runs the other way: for anything brazed, soldered, or heated above 400 °C in service, C12200 is the safer metallurgy and it costs the same or less. Specify it as the primary grade, not the fallback. Stay on C11000 only with a hard conductivity requirement - C12200 carries 85–90% IACS against C11000's 100%+, a 10–15% ampacity penalty on bus and conductor work.
C12200 Cost Benchmarks - By Product Form And Standard
| Product form | ASTM standard | USD / lb | USD / kg (≈) | Two-week move | Lead time |
|---|---|---|---|---|---|
| Plate (3–50 mm) | B152 / B152M | 8.35–10.15 | 18.4–22.4 | −0.08 | 3–5 weeks |
| Sheet (0.5–6 mm) | B152 | 8.65–10.55 | 19.1–23.3 | −0.09 | 3–5 weeks |
| Strip / coil (0.1–3 mm) | B152 | 8.85–10.85 | 19.5–23.9 | −0.08 | 4–6 weeks |
| Bus bar, flat & edge-round | B187 | 8.15–9.95 | 18.0–21.9 | −0.07 | 3–5 weeks |
| Bar / rod (Ø 5–120 mm) | B187 | 8.35–10.25 | 18.4–22.6 | −0.08 | 4–6 weeks |
| Seamless tube, general | B75 / B251M | 9.15–11.35 | 20.2–25.0 | −0.06 | 4–6 weeks |
| Water tube, K / L / M | B88 | 9.35–11.55 | 20.6–25.5 | −0.06 | 4–7 weeks |
| ACR tube, dehydrated & capped | B280 | 10.25–12.65 | 22.6–27.9 | +0.10 | 6–9 weeks |
| Capillary tube | B743 | 11.05–13.65 | 24.4–30.1 | +0.12 | 6–9 weeks |
| Medical-gas tube | B819 | 11.45–14.05 | 25.2–31.0 | +0.14 | 7–10 weeks |
| Welded tube | B447 | 8.75–10.85 | 19.3–23.9 | −0.07 | 3–5 weeks |
| Wire (Ø 0.5–6 mm) | B1 / B2 / B3 | 8.95–11.15 | 19.7–24.6 | −0.07 | 3–5 weeks |
| Fittings, solder-joint | ASME B16.22 | 11.85–14.55 | 26.1–32.1 | +0.07 | 4–6 weeks |
All figures USD per lb of finished product, ex-works, week ending November 6, 2026. Conversion: 1 lb = 0.4536 kg; multiply USD/lb by 2.205 for USD/kg.
The Two-Speed Market Persists - And The Fast Lane Got Faster
Copper stabilized this week, but the premium forms did not notice. ACR tube added $0.04, capillary $0.05, medical-gas $0.06 - a two-week move of +$0.10 to +$0.14/lb on cleaned-and-capped tube while flat-rolled fell. The driver has never been metal: it is draw-bench, deburring and cleaning-line capacity. Q4 HVAC retrofits and medical-facility builds compete for the same thin-wall, capped and cleaned lines, and medical-gas tube lead times extended to 7–10 weeks. The consequence for RFQs is mechanical: any form that passes through a cleaning, capping or certification line is capacity-priced and will not follow copper down. A buyer who delays a B819 order to chase the metal decline saves nothing and loses queue position - a 3,000 ft medical-gas order placed this week ships early January; placed December 1, it ships late January at a higher fabrication premium.

What To Do This Week, By Product Form
Flat-rolled and B187 bar - the wait is nearly over; buy on schedule. Two-week relief of $0.07–0.09/lb is already in quotes, with only $0.02–0.04 left. Write "quote valid 14 days with metal-adjustment clause" so the December relief passes through. If delivery is needed inside six weeks, order now - the residual saving is smaller than a week of expedite risk.
Brazed, soldered or heated assemblies - specify C12200 as the primary grade. At parity on B88 and B447, you are getting hydrogen-brittle-free metallurgy for free. Do not pay a cathode-premium-inflated C11000 quote for work a deoxidized grade does better. Keep C11000 only where the drawing demands 100% IACS.
B280 ACR, B743 capillary, B819 medical gas - book the slot now. Capacity-priced, up $0.10–0.14/lb over two weeks with lead times stretching to 7–10 weeks. The correct structure is a production-slot order with metal priced at shipment, capped ±$0.05/lb - you keep any further relief without exposing yourself to a copper rebound.
Welded B447 instead of seamless B75 where pressure allows. The gap is $0.40–0.50/lb plus one-to-two weeks faster. On a 20,000 lb tube program that is $8,000–10,000 - the largest controllable number in this week's table.
What Would Change The View
Three markers decide whether December brings more relief or a floor: the US cathode premium breaking $0.105/lb would push C11000 quotes up while C12200 holds - widening the parity window for deoxidized grades; LME copper losing $14,000/tonne would reopen a genuine wait-and-see on flat-rolled, adding roughly $0.05–0.07/lb of relief; and B819 lead times printing 11 weeks or more would confirm the cleaned-tube bottleneck has saturated even slot bookings - at that point fabrication premiums, not metal, set every tube price in the family.
C12200 Product Range And Specifications
| Product | Standards | Temper / condition | Size range | Testing & certification | Typical lead time |
|---|---|---|---|---|---|
| Plate | ASTM B152 / B152M, ASME SB-152 | M20 / O60 / H02 / H04 | 3–50 mm | EN 10204 3.1; UT on request | 3–5 weeks |
| Sheet | ASTM B152 / B370 | O60 / H02 / H04 | 0.5–6 mm | EN 10204 3.1 | 3–5 weeks |
| Strip / coil | ASTM B152 | O60 / H02 / H04 / H08 | 0.1–3 mm | EN 10204 3.1; eddy-current on coil | 4–6 weeks |
| Bus bar | ASTM B187 / B187M | M20 / H04 | 3–120 mm section | EN 10204 3.1; conductivity report optional | 3–5 weeks |
| Bar / rod | ASTM B187 / B49 | M20 / H04 | Ø 5–120 mm | EN 10204 3.1 | 4–6 weeks |
| Seamless tube | ASTM B75 / B251M, B68 (bright annealed) | O60 / H58 | OD 3–100 mm | Eddy-current + hydrostatic per B75; B68 ID cleanliness | 4–6 weeks |
| Water tube | ASTM B88 types K / L / M | H58 / O60 | OD 6–219 mm | Eddy-current + hydrostatic | 4–7 weeks |
| ACR tube | ASTM B280 | H58, dehydrated, capped | OD 4–28 mm | Dryness < 20 ppm moisture; capped & purged | 6–9 weeks |
| Capillary tube | ASTM B743 | Bright annealed, sealed | OD 1.6–12 mm | Bore cleanliness; flow-tested on request | 6–9 weeks |
| Medical-gas tube | ASTM B819 | Cleaned, nitrogen-capped | OD 10–108 mm | Residue-free cert; capped & labeled | 7–10 weeks |
| Welded tube | ASTM B447 | Welded, annealed | OD 6–219 mm | Weld seam eddy-current + hydrostatic | 3–5 weeks |
| Wire | ASTM B1 / B2 / B3 | H04 / O60 | Ø 0.5–6 mm | EN 10204 3.1; chemistry per UNS C12200 | 3–5 weeks |
| Fittings | ASME B16.22 / B16.18 | Wrought / cast, solder-joint | 6–108 mm | Pressure-rated per standard | 4–6 weeks |
All products supplied with actual Cu, P, O values on the mill certificate. Phosphorus held in the 0.015–0.040% band for full brazing compliance. Third-party witnessed inspection bookable in parallel with production. Incoterms: FOB, CFR, CIF, DAP.
Need C12200 DHP copper priced against this week's melt? We quote plate, sheet, strip, bus bar, seamless and welded tube, ACR, capillary and medical-gas tube to ASTM B152 / B187 / B75 / B88 / B280 / B743 / B819 / B447, with EN 10204 3.1 certificates showing actual phosphorus values. Send your drawing or bill of quantities to market@gneemetal.com for a line-item quote with the metal-adjustment clause written in.







