How to use copper pipe fittings
The following manufacturers of copper pipe quick connectors, copper water pipes and copper water pipes will explain how to use copper pipe fittings as follows:
1. Prepare tools: cutting machine, copper pipe, copper pipe elbow, T-joint, crimping tool, nut, etc.
2. Insert the copper pipe into the elbow, making sure that the insertion depth of the copper pipe reaches the bottom of the elbow. Use a cutting machine to cut the copper pipe short so that it forms an angle.
3. Connect the three ports of a T-shaped joint with copper pipes and fittings, and secure the pipes tightly with a crimping tool. This way each hole has an input and output copper tube. It is necessary to ensure that every interface is connected tightly and there is no leakage.
4. Place the other elbow on the other end of the pipe, and then use a cutting machine to cut the pipe short to form an angle.
5. Install a nut on the end of the copper pipe and insert the pipe into the corresponding copper pipe elbow to ensure a tight connection. Pay attention to the connection and do not over-tighten it.
6. Then, fix the pipe tightly with the crimping tool, so that the copper pipe and copper pipe fittings are completed.
