Gnee Steel (Tianjin) Co., Ltd.

(2) Molten pool smelting

Jul 24, 2024

(2) Molten pool smelting

info-288-175info-301-167info-275-183

Molten pool smelting includes Teniente copper smelting process, Mitsubishi process, Osmet process, Vanyukov copper smelting process, Isa smelting process, Noranda process, top-blown rotary furnace process (TBRC), Baiyin copper smelting process, Shuikoushan copper smelting process and Dongying bottom-blown oxygen-enriched smelting process. Molten pool smelting is to add fine sulfide concentrate to the melt while blowing air or industrial oxygen into the melt, and carry out intensive smelting in a violently stirred molten pool. Because the blast presses bubbles into the molten pool, when the bubbles rise through the molten pool, they cause the "melt column" to move, thus inputting a large amount of energy into the melt. Its furnace types include horizontal, vertical, rotary or fixed, and the blasting methods include side blowing, top blowing and bottom blowing.

Molten pool smelting has been used in industry since the 1970s. Due to the good heat and mass transfer effects during the molten pool smelting process, the metallurgical process can be greatly enhanced, achieving the purpose of improving equipment productivity and reducing energy consumption in the smelting process. Moreover, the requirements for furnace charge are not high. All types of concentrates, dry, wet, large particles, and powder are applicable. The furnace volume is small, the heat loss is small, and the energy saving and environmental protection are relatively good. In particular, the smoke rate is significantly lower than that of flash smelting.

Ausmelt process: Ausmelt top-blowing submerged spray qiang process has been widely used in the commercial production of non-ferrous metals and precious metals and high-temperature treatment of various wastes. At the end of 2003, including Ausmelt's new demonstration plant in South Australia, 16 smelters around the world used the Ausmelt process for commercial production, including the Jinchang smelter in Tongling, China, the copper plant in India, and the copper plant of the recycled copper manufacturer of the Korean Zinc Company. The Ausmelt process plant can be a single or multiple furnace configuration, and usually does not require complex material and flue gas treatment systems. Due to the simplicity, flexibility and high energy efficiency of the process, the equipment cost of the Ausmelt process is relatively low. The Ausmelt process focuses on reducing the size and complexity of peripheral equipment, so low-cost modifications in or around the Ausmelt furnace system allow customers to reduce the scale of tail gas treatment, especially sulfur fixation and acid plants, fuel and gas delivery systems. The raw materials are simple and the feed does not require drying and grinding.

goTop