Copper C10800 Pipes Price
| Size | Price in USD | Price in INR |
|---|---|---|
| 50MM X 8SWG X 5 MTR | $ 10.82 | 903.65 |
| 1/4 OD X 0.36 THK X 20 SWG | $ 22.66 | 1892.48 |
| 50MM X 8SWG X 7 MTR | $ 10.82 | 903.65 |
| 50MM X 8SWG X 2MTR | $ 10.81 | 902.81 |
| 50MM X 8SWG X 1.2 MTR | $ 10.79 | 901.14 |
| 1/2 OD X 0.89 MM THK | $ 21.01 | 1754.68 |
| 17 MM OD X 3 MM WT | $ 16.64 | 1389.71 |
C10800 Copper Tube Applicable Specification
| Form | Application | System | Satandard |
|---|---|---|---|
| Pipe | ASTM | B698 | |
| ASTM | B42 | ||
| Tubes, Seamless Condenser & Heat Exchanger, U-Bend | ASME | SB395 | |
| Seamless Tube | ASME | SB75 | |
| Pipe, Seamless. Standard Sizes | ASME | SB42 | |
| Condenser & Heat Exchanger Tube with Integral Fins | ASME | SB359 | |
| Seamless Condenser Tube & Ferrule Stock | Condenser Tube | ASTM | B111/B111M |
| ASME | SB111 | ||
| Tube | ASTM | B447 | |
| ASTM | B641 | ||
| MILITARY | MIL-T-24107 | ||
| ASTM | B75/B75M | ||
| ASTM | B716 | ||
| Capillary | ASTM | B360 | |
| Bright Annealed | ASTM | B68/B68M | |
| ASTM | B743 | ||
| ASTM | B543/B543M | ||
| ASTM | B395/B395M | ||
| ASTM | B359/B359M | ||
| ASTM | B641 | ||
| ASTM | B698 | ||
| Tube, Welded Heater Exchanger | ASME | SB543 |
Copper C10800 Tubes Size Chart
| Nominal | Type K Copper | Type L Copper | Type M Copper | Pipe Sizing Criteria | |||||
|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Diameter (ins) | Diameter (ins) | Velocity | Diameter (ins) | Loss in | Flow | |||
| (ins) | Inside | Outside | Inside | Outside | Ft/sec | Inside | Outside | PD'/100′ | GPM |
| 0.38 | 0.402 | 0.5 | 0.43 | 0.5 | 1.0 | 0.45 | 0.5 | 3 | 0.5 |
| 0.25 | 0.305 | 0.375 | 0.315 | 0.375 | |||||
| 0.50 | 0.527 | 0.625 | 0.545 | 0.625 | 1.5 | 0.569 | 0.625 | 3 | 1 |
| 1.00 | 0.995 | 1.125 | 1.025 | 1.125 | 2.5 | 1.055 | 1.125 | 3 | 7 |
| 0.75 | 0.745 | 0.875 | 0.785 | 0.875 | 2.0 | 0.811 | 0.875 | 3 | 3 |
| 1.25 | 1.245 | 1.375 | 1.265 | 1.375 | 3.0 | 1.291 | 1.375 | 3 | 12 |
| 2.00 | 1.959 | 2.125 | 1.985 | 2.125 | 4.0 | 2.009 | 2.125 | 3 | 35 |
| 1.50 | 1.481 | 1.625 | 1.505 | 1.625 | 3.5 | 1.527 | 1.625 | 3 | 17 |
| 2.50 | 2.435 | 2.625 | 2.465 | 2.625 | 4.5 | 2.495 | 2.625 | 3 | 70 |
| 3.50 | 3.385 | 3.625 | 3.425 | 3.625 | 5.5 | 3.459 | 3.625 | 3 | 160 |
| 10.00 | 9.449 | 10.125 | 9.625 | 10.125 | 8.0 | 9.701 | 10.125 | 1.5 | 1835 |
| 3.00 | 2.907 | 3.125 | 2.945 | 3.125 | 5.0 | 2.981 | 3.125 | 3 | 110 |
| 4.00 | 3.857 | 4.125 | 3.905 | 4.125 | 6.0 | 3.935 | 4.125 | 2.5 | 225 |
| 6.00 | 5.741 | 6.125 | 5,845 | 6.125 | 7.0 | 5.881 | 6.125 | 2.2 | 575 |
| 5.00 | 4.805 | 5.125 | 4.875 | 5.125 | 6.5 | 4.907 | 5.125 | 2.5 | 380 |
| 8.00 | 7.583 | 8.125 | 7.725 | 8.125 | 7.5 | 7.785 | 8.125 | 1.9 | 1105 |
| 12.00 | 11.315 | 12.125 | 11.565 | 12.125 | 8.5 | 11.617 | 12.125 | 1 | 2800 |
C10800 Oxygen Free Low Phosphorus Copper Tube Application
Gasoline Lines
Air Conditioners
Oil Coolers
Heat Exchanger Tubes
Plumbing Tube
Thermostatic Control Tubing
Air Lines
Heater Lines
Distiller Tubes


UNS C10800 Copper Alloy Seamless Tube Mechanical Properties
| Properties | Metric | Imperial |
|---|---|---|
| Hardness, Rockwell B | 10 | 10 |
| Hardness, Rockwell F | 60 | 60 |
| Hardness, HR30T | 25 | 25 |
| Tensile strength, ultimate | 250 MPa | 36300 psi |
| Tensile strength, yield | 195 MPa | 28300 psi |
| Poissons ratio | 0.307 | 0.307 |
| Modulus of elasticity | 115 GPa | 16700 ks |
| Machinability | 20% | 20% |
| Shear modulus | 44.0 GPa | 6380 ks |
| Shear strength | 170 MPa | 24700 psi |
Fabrication Properties Of OFLP C10800 Light Drawn Tube
| JOINING TECHNIQUE | SUITABILITY |
|---|---|
| Brazing | Excellent |
| Oxyacetylene Welding | Good |
| Soldering | Excellent |
| Gas Shield Arc Welding | Excellent |
| Spot Weld | Not Recommended |
| Forgeability Rating | 65 |
| Coated Metal Arc Welding | Not Recommended |
| Seam Weld | Not Recommended |
| Capacity for Being Cold Worked | Excellent |
| Butt Weld | Good |
| Capacity for Being Hot Formed | Excellent |
| Machineability Rating | 20 |
Cu-b2 Light Annealed Tube Physical Properties
| US CUSTOMARY | METRIC | |
|---|---|---|
| MELTING POINT – SOLIDUS | 1981 F | 1083 C |
| MELTING POINT – LIQUIDS | 1981 F | 1083 C |
| DENSITY | 0.323 LB/IN3 @ 68 F | 8.94 GM/CM3 @ 20 C |
| ELECTRICAL RESISTIVITY | 11.3 OHMS–CMIL/FT @ 68 F | 1.88 MICROHM–CM @ 20 C |
| SPECIFIC GRAVITY | 8.94 | 8.94 |
| ELECTRICAL CONDUCTIVITY * | 92% ACS @ 68 F | 0.538 MEGASIEMENS/CM @ 20 C |
| COEFFICIENT OF THERMAL EXPANSION | 9.4 ·10–6 PER OF (68–212 F) | 16.9 ·10–6 PER OC (20–100 C) |
| THERMAL CONDUCTIVITY | 202.0 BTU · FT/(HR · FT2·OF) @ 68 F | 349.6 W/M · OK AT 20 C |
| COEFFICIENT OF THERMAL EXPANSION | 9.8 ·10–6 PER OF (68–572 F) | 17.6 ·10–6 PER OC (20–300 C) |
| COEFFICIENT OF THERMAL EXPANSION | 9.6 ·10–6 PER OF (68–392 F) | 17.3 ·10–6 PER OC (20–200 C) |
| MODULAS OF ELASTICITY IN TENSION | 17000 KSI | 117000 MPA |
| SPECIFIC HEAT CAPACITY | 0.092 BTU/LB/OF @ 68 F | 393.5 J/KG · OK AT 293 K |
| MODULAS OF RIGIDITY | 6400 KSI | 44130 MPA |
Thermal Properties Of Copper Alloy C10800 Hard Drawn Tubes
| Thermal Properties | English | Metric |
|---|---|---|
| CTE, linear | 9.40 µin/in-°F @Temperature 68.0 – 212 °F |
16.9 µm/m-°C @Temperature 20.0 – 100 °C |
| 9.80 µin/in-°F @Temperature 68.0 – 572 °F |
17.6 µm/m-°C @Temperature 20.0 – 300 °C |
|
| 9.60 µin/in-°F @Temperature 68.0 – 392 °F |
17.3 µm/m-°C @Temperature 20.0 – 200 °C |
|
| Annealing Point | 900 – 1400 °F | 482 – 760 °C |
| Thermal Conductivity | 202 BTU-in/hr-ft²-°F | 29.1 W/m-K |
| Specific Heat Capacity | 0.0920 BTU/lb-°F | 0.385 J/g-°C |
| Melting Point | 1981 °F | 1083 °C |
about GNEE

why choose our products
Our company is equipped with advanced production lines capable of extruding, drawing, refining, and processing copper rods, copper tubes, copper busbars, and special-shaped copper products. To ensure every single product meets international standards, we have established a comprehensive quality control center. This center is furnished with a range of high-precision testing equipment, including spectrometers, metallurgical microscopes, universal material testing machines, and conductivity testers. This allows us to perform rigorous checks on raw materials, semi-finished, and finished products, covering chemical composition, physical properties, and non-destructive testing.
If you need any help, please contact us immediately:sales@gneesteel.com
Other product forms provided by GNEE
|
Material |
Brass:C21000,C22000,C22600,C23000,C24000,C26000,C26130,C26800,C27000,C27200,C27400, C2800,H59,H62,H70,H65,H80,H90,CuZn30,CuZn37,CuZn35,CuZn40,etcLeaded |
|
Diameter |
1/4",3/8",1/2", 5/8", 7/8" or customized |
|
Thickness |
0.5/0.6/0.7/0.8/1 or Customized |
|
Length |
15m/50ft or customized |
|
Standard |
JIS,AISI,ASTM,GB,DIN,EN |
|
Price Term |
x-Work,FOB,CNF,CFR,CIF,FCA,DDP,DDU,etc |
|
Payment Term |
TT,L/C,Western Union,D/P,etc |
|
Application |
refrigeration,installation of air conditioner,construction water and gas |
|
Package |
Standard export package,suit for all kinds of transport,or as required. |
|
Material |
Copper, Brass, Bronze and special copper alloy |
|
|
Grade |
ASTM |
C10100,C11000,C12200,C21000,C22000,C23000,C24000,C26000, |
|
G/B |
TU1,T2,TP2,H96,H90,H85,H80,H70,H65,H63,H62,H59,HPb63-3, |
|
|
JIS |
C 1011,C 1100,C 1220,C3604,C 2100,C 2200,C 2300,C 2400, C 2600, |
|
|
BS |
Cu-OFE,C 101,Cu-DHP,CZ 125,CZ 101,CZ 102,CZ 103,CZ 106,CZ 107, CZ 108,CZ 109,CZ 123,CZ 124, CZ 121,CZ 111,CZ 133, Pb 104, |
|
|
DIN/ISO |
CuZn5,CuZn10,CuZn15,CuZn20,CuZn30,CuZn35,CuZn33,CuZn36, |
|
|
Shape |
Round, Square, Flat, Hexagon, Oval, Half-round or Customized |
|
|
Dimension |
Bar/Rod |
Standard(Diameter 5-160 mm) or Customized |
|
Wire |
Standard(Diameter 0.02-6 mm) or Customized |
|
|
Plate/Sheet |
Standard(T 0.2-50 mm/W 200-3000 mm/L 6000 mm) or Customized |
|
|
Strip |
Standard(T 0.05-1.5 mm/W 20-600 mm/L 20000 mm) or Customized |
|
|
Tube/Pipe |
Standard(OD 3-360mm/Wall thickness 0.5-50 mm) or Customized |
|
|
Standard |
GB/T,JIS,ASTM, ISO, DIN, BS, NF etc. |
|
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard. |
|
|
Package |
Plastic film + Wooden case or as per customer requirement |
|
|
Surface |
Polished,bright,oiled,hair line,brush,mirror,or as required |
|
|
Deliver time |
According to order's quantity. |
|
|
Shipment |
By sea, by air, DHL, UPS, FedEx etc. or as required |
|
|
Application |
Electric light industry, machinery manufacturing, Building industry ,defense industry, and other fields Manufacturing industrial |
|
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Square,Rectangular,etc. |
||
|
Specifications |
Diameter:3~200mm |
||
|
Length |
3m,5.8m, 6m, 11.8m, 12m, or as required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Export to |
Singapore,Indonesia,Ukraine,Korea,Thailand, Vietnam, Saudi Arabia, Brazil, Spain, |
||
|
Application |
Copper plates are mainly used in electrical conductivity, heat conduction, and corrosion-resistant equipment. For instance, they are applied in wires, cables, conductive screws, blasting detonators, evaporators for chemical industries, storage containers, and various pipelines, etc. They can also be used as force-bearing parts for various deep drawing and bending manufacturing processes, such as pins, rivets, washers, nuts, conduits, pressure gauges, screens, and radiator parts, etc. |
||
|
Contact |
If any requirement please feel free to inform me at any time. |
||
|
Grade |
C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920, C10930,C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300, C12500,C14200,C14420,C14500,C14510,C14520,C14530,C17200,C19200, C21000,C23000,C26000,C27000,C27400,C28000,C33000,C33200,C37000, C44300,C44400,C44500,C60800,C63020,C65500,C68700,C70400,C70620, C71000,C71500,C71520,C71640,C72200,T1,T2,T3,etc |
|
Standard |
JIS ASTM DIN EN ISO |
|
Diameter |
0.3-5mm/custom |
|
Length |
custom |
|
Surface |
mill,polished,bright,mirror,hair line,brush,checkered,antique,sand blast,etc |
|
Application |
Building, industry etc |
|
Payment Terms |
T/T or L/C at sight |
|
Delivery time |
5-15 days after receiving L/C or deposit |
|
Remark |
Specific requirement of alloy grade,temper or specification can be discussed at your request |







