What is a C11000 copper pipe?
C11000 ETP (Electronic Tough Pitch) Copper is one of the most popular copper alloys. C110 is basically pure copper with a 99.9% copper composition. 110 Copper is used in a wide variety of applications in a number of industries. It is utilized due to its high electrical conductivity (100% IAS) and its range of fabrication methods. C11000 ETP Copper can be bent, soldered, drilled, peened, rivited and formed. It is not a good machining metal with a machinability rating of 20. C110 also has a high thermal conductivity.
Applications
Bus Bar
Ground Bar
Terminals
Contacts
Conductors
Printing Rolls
Heat Exchangers
Chemical Composition
(%max., unless shown as range or min.)
| Cu(1) | O | |
| Min./Max. | 99.90 min | - |
| Nominal | - | .04 |
Mechanical Properties
| Temper | Section Size |
Cold Work |
Typ/ Min |
Temp | Tensile Strength |
Yield Strength (0.5% ext. under load) |
El | Rockwell Hardness |
Brinell Hard. |
Shear Strength |
Fatigue Strength* |
||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| in. | % | F | ksi | ksi | % | B | C | F | 30T | 500 | 3000 | ksi | ksi | ||||||
| mm. | C | MPa | MPa | MPa | MPa | ||||||||||||||
| Flat Products | |||||||||||||||||||
| H02 | 0.04 | 0 | TYP | 68 | 42 | 36 | 14 | 40 | - | 84 | 50 | - | - | 26 | 13 | ||||
| 1 | 20 | 290 | 248 | 14 | 40 | - | 84 | 50 | - | - | 179 | 90 | |||||||
| M20 | 0.025 | 0 | TYP | 68 | 32 | 10 | 50 | - | - | 40 | - | - | - | 22 | - | ||||
| 0.64 | 20 | 221 | 69 | 50 | - | - | 40 | - | - | - | 152 | - | |||||||
| Rod | |||||||||||||||||||
| M20 | 1 | 0 | TYP | 68 | 32 | 10 | 55 | - | - | 40 | - | - | - | 22 | - | ||||
| 25.4 | 20 | 221 | 69 | 55 | - | - | 40 | - | - | - | 152 | - | |||||||
| Shapes | |||||||||||||||||||
| M30 | 0.5 | 0 | TYP | 68 | 32 | 10 | 50 | - | - | 40 | - | - | - | 22 | - | ||||
| 12.7 | 20 | 221 | 69 | 50 | - | - | 40 | - | - | - | 152 | - | |||||||
| M20 | 0.5 | 0 | TYP | 68 | 32 | 10 | 50 | - | - | 40 | - | - | - | 22 | - | ||||
| 12.7 | 20 | 221 | 69 | 50 | - | - | 40 | - | - | - | 152 | - | |||||||
| Flat Products | |||||||||||||||||||
| H04 | 0.04 | 0 | TYP | 68 | 50 | 45 | 6 | 50 | - | 90 | 57 | - | - | 28 | - | ||||
| 1 | 20 | 345 | 310 | 6 | 50 | - | 90 | 57 | - | - | 193 | - | |||||||
| Rod | |||||||||||||||||||
| H04 | 0.25 | 40 | TYP | 68 | 55 | 50 | 10 | 60 | - | 94 | - | - | - | 29 | - | ||||
| 6.35 | 20 | 379 | 345 | 10 | 60 | - | 94 | - | - | - | 200 | - | |||||||
| Wire | |||||||||||||||||||
| OS050 | 0.08 | 0 | TYP | 68 | 35 | - | 35 | - | - | - | - | - | - | 24 | - | ||||
| 2 | 20 | 241 | - | 35 | - | - | - | - | - | - | 165 | - | |||||||
| Flat Products | |||||||||||||||||||
| H08 | 0.04 | 0 | TYP | 68 | 55 | 50 | 4 | 60 | - | 94 | 63 | - | - | 29 | 14 | ||||
| 1 | 20 | 379 | 345 | 4 | 60 | - | 94 | 63 | - | - | 200 | 97 | |||||||
| H01 | 0.025 | 0 | TYP | 68 | 38 | 30 | 35 | 25 | - | 70 | - | - | - | 25 | - | ||||
| 0.64 | 20 | 262 | 207 | 35 | 25 | - | 70 | - | - | - | 172 | - | |||||||
| Rod | |||||||||||||||||||
| OS050 | 1 | 0 | TYP | 68 | 32 | 10 | 55 | - | - | 40 | - | - | - | 22 | - | ||||
| 25.4 | 20 | 221 | 69 | 55 | - | - | 40 | - | - | - | 152 | - | |||||||
| Wire | |||||||||||||||||||
| H08 | 0.08 | 0 | TYP | 68 | 66 | - | 1 | - | - | - | - | - | - | 33 | - | ||||
| 2 | 20 | 455 | - | 1 | - | - | - | - | - | - | 228 | - | |||||||
| Flat Products | |||||||||||||||||||
| H04 | 1 | 0 | TYP | 68 | 45 | 40 | 20 | 45 | - | 85 | - | - | - | 26 | - | ||||
| 25.4 | 20 | 310 | 276 | 20 | 45 | - | 85 | - | - | - | 179 | - | |||||||
| OS050 | 0.025 | 0 | TYP | 68 | 32 | 10 | 50 | - | - | 40 | - | - | - | 22 | - | ||||
| 0.64 | 20 | 221 | 69 | 50 | - | - | 40 | - | - | - | 152 | - | |||||||
| H00 | 0.025 | 0 | TYP | 68 | 36 | 28 | 40 | 10 | - | 60 | - | - | - | 25 | - | ||||
| 0.64 | 20 | 248 | 193 | 40 | 10 | - | 60 | - | - | - | 172 | - | |||||||
| Rod | |||||||||||||||||||
| H04 | 2 | 16 | TYP | 68 | 45 | 40 | 20 | 45 | - | 85 | - | - | - | 26 | - | ||||
| 51 | 20 | 310 | 276 | 20 | 45 | - | 85 | - | - | - | 179 | - | |||||||
| H04 | 1 | 35 | TYP | 68 | 48 | 44 | 16 | 47 | - | 87 | - | - | - | 27 | 17 | ||||
| 25.4 | 20 | 331 | 303 | 16 | 47 | - | 87 | - | - | - | 186 | 117 | |||||||
| Tube | |||||||||||||||||||
| OS025 | 0.065 | 0 | TYP | 68 | 34 | 11 | 45 | - | - | 45 | - | - | - | 23 | - | ||||
| 1.65 | 20 | 234 | 76 | 45 | - | - | 45 | - | - | - | 159 | - | |||||||
| H80 | 0.065 | 40 | TYP | 68 | 55 | 50 | 8 | 60 | - | 95 | 63 | - | - | 29 | - | ||||
| 1.65 | 20 | 379 | 345 | 8 | 60 | - | 95 | 63 | - | - | 200 | - | |||||||
| H55 | 0.065 | 15 | TYP | 68 | 40 | 32 | 25 | 35 | - | 77 | 45 | - | - | 26 | - | ||||
| 1.65 | 20 | 276 | 221 | 25 | 35 | - | 77 | 45 | - | - | 179 | - | |||||||
| Flat Products | |||||||||||||||||||
| M20 | 0.04 | 0 | TYP | 68 | 34 | 10 | 45 | - | - | 45 | - | - | - | 23 | - | ||||
| 1 | 20 | 234 | 69 | 45 | - | - | 45 | - | - | - | 159 | - | |||||||
| Shapes | |||||||||||||||||||
| OS050 | 0.5 | 0 | TYP | 68 | 32 | 10 | 50 | - | - | 40 | - | - | - | 22 | - | ||||
| 12.7 | 20 | 221 | 69 | 50 | - | - | 40 | - | - | - | 152 | - | |||||||
| Wire | |||||||||||||||||||
| H04 | 0.08 | 0 | TYP | 68 | 55 | - | 1 | - | - | - | - | - | - | 29 | - | ||||
| 2 | 20 | 379 | - | 1 | - | - | - | - | - | - | 200 | - | |||||||
| Flat Products | |||||||||||||||||||
| OS050 | 0.04 | 0 | TYP | 68 | 32 | 10 | 45 | - | - | 40 | - | - | - | 22 | - | ||||
| 1 | 20 | 221 | 69 | 45 | - | - | 40 | - | - | - | 152 | - | |||||||
| Shapes | |||||||||||||||||||
| H04 | 0.5 | 15 | TYP | 68 | 40 | 32 | 30 | 35 | - | - | - | - | - | 26 | - | ||||
| 12.7 | 20 | 276 | 221 | 30 | 35 | - | - | - | - | - | 179 | - | |||||||
| Tube | |||||||||||||||||||
| OS050 | 0.065 | 0 | TYP | 68 | 32 | 10 | 45 | - | - | 40 | - | - | - | 22 | - | ||||
| 1.65 | 20 | 221 | 69 | 45 | - | - | 40 | - | - | - | 152 | - | |||||||
| Flat Products | |||||||||||||||||||
| OS025 | 0.04 | 0 | TYP | 68 | 34 | 11 | 45 | - | - | 45 | - | - | - | 23 | 11 | ||||
| 1 | 20 | 234 | 76 | 45 | - | - | 45 | - | - | - | 159 | 76 | |||||||
| H10 | 0.04 | 0 | TYP | 68 | 57 | 53 | 4 | 62 | - | 95 | 64 | - | - | 29 | - | ||||
| 1 | 20 | 393 | 365 | 4 | 62 | - | 95 | 64 | - | - | 200 | - | |||||||
| H01 | 0.04 | 0 | TYP | 68 | 38 | 30 | 25 | 25 | - | 70 | 36 | - | - | 25 | - | ||||
| 1 | 20 | 262 | 207 | 25 | 25 | - | 70 | 36 | - | - | 172 | - | |||||||
| H00 | 0.04 | 0 | TYP | 68 | 36 | 28 | 30 | 10 | - | 60 | 25 | - | - | 25 | - | ||||
| 1 | 20 | 248 | 193 | 30 | 10 | - | 60 | 25 | - | - | 172 | - | |||||||
| H04 | 0.025 | 0 | TYP | 68 | 50 | 45 | 12 | 50 | - | 90 | - | - | - | 28 | - | ||||
| 0.64 | 20 | 345 | 310 | 12 | 50 | - | 90 | - | - | - | 193 | - | |||||||
why choose us
why choose our products
We are a leading manufacturer and exporter specializing in a comprehensive range of high-quality copper products, including copper tubes, copper plates/sheets, copper bars, copper rods, copper wires, and copper strips. Our advanced manufacturing facilities are equipped with state-of-the-art continuous casting lines, extrusion presses, cold rolling mills, and drawing machines to ensure precision and consistency. Rigorous quality control is integral to our process, conducted through spectrometers for material verification, tensile testers, eddy current testers, and hydrostatic pressure testers, guaranteeing that all our products meet international standards for performance and durability.
E-mail: sales@gneesteel.com
