Naval Brass C46400 is nominally composed of 60% copper, 39.2% zinc and 0.8% tin. As is typical of brass alloys with the duplex alpha + beta structure, C46400 has good strength and rigidity. By substituting tin for an equal quantity of zinc, a high corrosion resistance to seawater is achieved. The addition of tin also gives the alloy an inherent resistance to dezincification, thereby further inhibiting the impingement by seawater at higher than normal temperatures. The alloy is also noted for its resistance to wear, fatigue, galling, and stress corrosion cracking.
Typical Applications:
BUILDERS HARDWARE : Lock Pins
ELECTRICAL : Precision Shipboard Equipment
FASTENERS : Rivets, Bolts, Nuts
INDUSTRIAL : Welding Rod, Condenser Plates, Structural Uses, Valve Stems, Balls, Heat Exchanger Tube, Aircraft Turn Buckle Barrels, Bearings, Dies, Golf Ball Production, Pressure Vessels, Bearings, Bushings, Hub Cones
MARINE : Properller Shafts, Marine Hardware, Decorative Fittings, Shafting, Propeller Shafts, Turn buckles
ORDINANCE : Missle Components
OTHER : Baffle Plates and Flanges
PLUMBING : Fittings
Equivalent Specifications
| SPECIFICATIONS | DESIGNATION |
|---|---|
| ISO | CuZn38Sn1 |
| Europen | CuZn39Sn1 |
| BS | CZ 133 |
| JIS | C 4640 |
Chemical Composition
| Cu | Fe | Pb | Sn | Zn | |
|---|---|---|---|---|---|
| Min/Max | 59.0 - 62.0 | 0.1 | 0.2 | 0.5 - 1.0 | Rem |
| Nominals | 60.0000 | - | - | 0.7000 | 39.2000 |
Physical Properties
| Coefficient of Thermal Expansion | 11.8 10−6Per °F (68-572 F) |
| Density | 0.304 lb/in3 @ 68 F |
| Electrical Conductivity | 26 %IACS @ 68 F |
| Electrical Resistivity | 39.9 ohms-cmil/ft @ 68 F |
| Melting Point Liquid US | 1650 F |
| Melting Point Solid US | 1630 F |
| Modulas of Elasticity in Tension | 15000 ksi |
| Modulas of Rigidity | 5600 ksi |
| Specific Gravity | 8.41 |
| Specific Heat Capacity | 0.09 Btu/lb/°F @ 68 F |
| Thermal Conductivity | 67.0 BTU in/hr.ft2.°F @ 68 F |
Sizes Available
| HOLLOW RODS | Min Bore Size 20 mm and Max OD 100 mm |
| ROUND RODS/RODS | 6mm To 130 mm |
| HEX | 5mm To 60mm |
| SQUARE | 4mm To 60mm |
| FLAT | 5mm Min Thickness and max Width 120mm |
| PROFILES / SECTIONS | AS per Customer Drawing |
| BILLETS | Up to 200 mm |
| INGOTS | AS per Specification |
Copper products that GNEE can provide
|
Product name
|
Copper Pipe / Tube
|
|
Round copper pipe
|
Wall thickness: 0.2-120mm
|
|
Outside Diameter: 2mm~910mm
|
|
|
Rectangular copper pipe
|
Wall thickness: 0.2mm~910mm
|
|
Size: 2mm*4mm~1016mm*1219mm
|
|
|
Hardness
|
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc
|
|
Standard
|
GB/T5231-2001.GB/T1527-2006.JISH3100-2006, JISH3250-2006, JISH3300-2006, ASTM-B152M-06, ASTM-B187, ASTM-B75M-02, ASTM-B42-02, ASTM-B370 /ASTM-B152 etc
|
|
Material
|
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800,
C10910,C10920,TP1,TP2,C10930,C11000,C11300,C11400,C11500,
C11600,C12000,C12200,C12300,TU1,TU2,C12500,C14200,C14420,
C14500,C14510,C14520,C14530,C17200,C19200,C21000,C23000,
C26000,C27000,C27400,C28000,C33000,C33200,C37000,C44300,
C44400,C44500,C60800,C63020,C65500,C68700,C70400,C70600,
C70620,C71000,C71500,C71520,C71640,C72200,etc.
|
|
Usage
|
Pressure vessels, Heat exchangers, Cotter, pins, Rivets, Radiators, Gaskets, Roofing, Gutters
|
|
Package
|
Standard export package,suit for all kind of transport,or as required.
|
|
Material |
Copper, Brass, Bronze and special copper alloy |
|
|
Grade |
ASTM |
C10100,C11000,C12200,C21000,C22000,C23000,C24000,C26000, |
|
G/B |
TU1,T2,TP2,H96,H90,H85,H80,H70,H65,H63,H62,H59,HPb63-3, |
|
|
JIS |
C 1011,C 1100,C 1220,C3604,C 2100,C 2200,C 2300,C 2400, C 2600, |
|
|
BS |
Cu-OFE,C 101,Cu-DHP,CZ 125,CZ 101,CZ 102,CZ 103,CZ 106,CZ 107, CZ 108,CZ 109, CZ 123,CZ 124,CZ 121,CZ 111,CZ 133, Pb 104, |
|
|
DIN/ISO |
CuZn5,CuZn10,CuZn15,CuZn20,CuZn30,CuZn35,CuZn33,CuZn36, |
|
|
Shape |
Round, Square, Flat, Hexagon, Oval, Half-round or Customized |
|
|
Dimension |
Bar/Rod |
Standard(Diameter 5-160 mm) or Customized |
|
Wire |
Standard(Diameter 0.02-6 mm) or Customized |
|
|
Plate/Sheet |
Standard(T 0.2-50 mm/W 200-3000 mm/L 6000 mm) or Customized |
|
|
Strip |
Standard(T 0.05-1.5 mm/W 20-600 mm/L 20000 mm) or Customized |
|
|
Tube/Pipe |
Standard(OD 3-360mm/Wall thickness 0.5-50 mm) or Customized |
|
|
Standard |
GB/T,JIS,ASTM, ISO, DIN, BS, NF etc. |
|
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard. |
|
|
Package |
Plastic film + Wooden case or as per customer requirement |
|
|
Surface |
Polished,bright,oiled,hair line,brush,mirror,or as required |
|
|
Deliver time |
According to order's quantity. |
|
|
Shipment |
By sea, by air, DHL, UPS, FedEx etc. or as required |
|
|
Application |
Electric light industry, machinery manufacturing, Building industry ,defense industry, and other fields Manufacturing industrial |
|
|
Product name |
Copper plate |
|||
|
Width |
500-2000mm or as customer request |
|||
|
Thickness |
0.2-120mm or as customer request |
|||
|
Length |
1000-6000mm or as customer request |
|||
|
Processing service |
Welding, stamping, cutting, bending, unwinding |
|||
|
Application |
Widely used in electrical industry, medical equipment, construction, chemical, |
|||
|
Export packing |
Standard Marine packaging or custom packaging |
|||
|
Price Terms |
FOB CIF CFR,or We can also go into detail |
|||
|
Product Name |
Copper Wire |
|
Standard |
AISI, ASTM, BS, DIN, EN, GB, JIS |
|
Diameter |
0.6mm / 0.8mm / 0.9mm / 1.0mm / 1.2mm / 1.6mm |
|
Thinckness |
0.12mm-3.0mm |
|
Cu Content (%) |
99.998% |
|
Alu-Zinc coating |
30-180g/m2 |
|
Material |
C21000,C22000,C22600,C23000,C24000,C26000,C26130,C26800,C27000,C27200,C27400, etc. |
|
Package |
Standard seaworthy export packing:
3 layers of packing, inside is kraft paper, water plastic film is in the middle and outside GI steel sheet to be covered by steel strips with lock, with inner coil sleeve |
|
Certification |
ISO, SGS, CE |
|
Delivery |
8-20 days |
|
Payment Terms |
T/T, LC, Western Union, Paypal, etc. |
|
MOQ |
1 Ton |
copper CNC machined parts
|
Processing |
CNC Turning,CNC Milling,Laser Cutting,Bending,Spining,Wire Cutting,Stamping, Electric Discharge Machining(EDM),Injection Molding,3D Printing,Rapid Prototype,Moulds etc. |
|
Materials |
Aluminum:2000 series,6000 series,7075,5052,etc. |
|
Stainlesss steel:SUS303,SUS304,SS316,SS316L,17-4PH,etc. |
|
|
Steel:1214L/1215/1045/4140/SCM440/40CrMo,etc. |
|
|
Brass:260,C360,H59,H60,H62,H63,H65,H68,H70,Bronze,Copper |
|
|
Titanium:Grade F1-F5 |
|
|
Plastic:Acetal/POM/PA/Nylon/PC/PMMA/PVC/PU/Acrylic/ABS/PTFE/PEEK etc. |
|
|
|
Anodized,Bead Blasted,Silk Screen,PVD Plating,Zinc/NickI/Chrome/Titanium Plating, |
|
Tolerance |
+ / - 0 . 0 1 m m |
|
Surface |
Min Ra 0.1~3.2 |
|
CERTIFICATE |
ISO9001:2015,IOS14001：2015,ROSH. |
Why choose us?
Since our establishment in 2008, our company has specialized in the production and export of copper products. We utilize advanced production lines and a comprehensive quality control system. From raw materials to finished products, every step is rigorously inspected using precision instruments (such as spectrometers, metallographic microscopes, and conductivity testers) to ensure that our products meet international standards for composition, dimensions, and performance. We are committed to providing high-quality, high-precision copper products and reliable service to our global customers.
Email:sales@gneesteel.com
active members
years experience
Square Meters Built
Cooperating Partner
