Phosphorus-Deoxidized copper tubes – C12200 – are extensively used in sugar refineries for condensers and evaporators. Deoxidized copper is the standard material for transferring heat from steam to water or air because of their excellent resistance to corrosion by fresh water and their high thermal conductivities.
| UNS No. | C12200 – BSI No. C107 – ISO Name Cu-DHP |
| Chemical Comp. (%) | Cu 99.9 / P 0.015N ~ 0.040 |
| ASTM Spec. | B 75, B 111, B 395 |
| ASME Spec. | SB 111, SB 395 |
| Applications | Condenser, evaporator & heat exchanger tubes; Air conditioning & refrigeration; Plumbing pipes & steam tubes. |
| Temper | H55 Light Drawn / H80 Hard Drawn / O61 Annealed |
| Properties * | Metric | English |
| Density | 8.94 g/cm³ | 0.323 lb/in³ |
| Tensile Strength | 221 ~ 379 MPa | 32 ~ 55 ksi |
| Yield Strength | 69 ~ 345 MPa | 10 ~ 50 ksi |
| CTE, linear | 17.7 10-6/°C @ 20.0 – 300 °C | 9.8 10-6/°F @ 70.0 – 570 °F |
| Specific Heat Capacity | 0.0920 cal/g-°C @ 20ºC | 0.0920 BTU/lb-°F @ 70ºF |
| Thermal Conductivity | 339 W/m-K @ 20.0 °C | 196 BTU/ft2/ft/h/°F @ 70.0 °F |
| Melting Point | 1083 °C | 1981 °F |
ASTM B75/B75M-20 Standard Specification for Seamless Copper Tube
This specification establishes the requirements for seamless round, rectangular, and square copper tube (UNS Nos. C10100, C10200, C10300, C10800, C12000, and C12200) suitable for general engineering applications. The material of manufacture shall be billets, cast bars, or tube. The tube shall be manufactured by hot- and cold-working processes, shall be cold drawn to the finished size and wall thickness, and shall be supplied in cold-drawn or annealed temper condition. The material shall conform to the chemical composition requirements prescribed for copper, phosphorus, and arsenic, as determined by chemical analysis, and to the mechanical property requirements including tensile strength, yield strength, Rockwell hardness, and straightening. Requirements for grain size, electrical mass resistivity, and dimensions are specified. The following test methods are detailed: grain size, electrical resistivity, tensile and yield strength, and hardness tests, expansion test for round table, microscopical examination, test for hydrogen embrittlement, and nondestructive tests such as electromagnetic (eddy-current), hydrostatic, and pneumatic pressure tests.
|
Copper UNS No. |
Type of Copper |
|
C10100 |
Oxygen-free electronic |
|
C10200 |
Oxygen-free without residual deoxidants |
|
C10300 |
Oxygen-free, extra low phosphorus |
|
C10800 |
Oxygen-free, low phosphorus |
|
C12000 |
Phosphorus deoxidized, low residual phosphorus |
|
C12200 |
Phosphorus deoxidized, high residual phosphorus |
about GNEE
why choose our products
Our company is equipped with advanced production lines capable of extruding, drawing, refining, and processing copper rods, copper tubes, copper busbars, and special-shaped copper products. To ensure every single product meets international standards, we have established a comprehensive quality control center. This center is furnished with a range of high-precision testing equipment, including spectrometers, metallurgical microscopes, universal material testing machines, and conductivity testers. This allows us to perform rigorous checks on raw materials, semi-finished, and finished products, covering chemical composition, physical properties, and non-destructive testing.
If you need any help, please contact us immediately:sales@gneesteel.com
Other product forms provided by GNEE
|
Material |
Brass:C21000,C22000,C22600,C23000,C24000,C26000,C26130,C26800,C27000,C27200,C27400, C2800,H59,H62,H70,H65,H80,H90,CuZn30,CuZn37,CuZn35,CuZn40,etcLeaded |
|
Diameter |
1/4",3/8",1/2", 5/8", 7/8" or customized |
|
Thickness |
0.5/0.6/0.7/0.8/1 or Customized |
|
Length |
15m/50ft or customized |
|
Standard |
JIS,AISI,ASTM,GB,DIN,EN |
|
Price Term |
x-Work,FOB,CNF,CFR,CIF,FCA,DDP,DDU,etc |
|
Payment Term |
TT,L/C,Western Union,D/P,etc |
|
Application |
refrigeration,installation of air conditioner,construction water and gas |
|
Package |
Standard export package,suit for all kinds of transport,or as required. |
|
Material |
Copper, Brass, Bronze and special copper alloy |
|
|
Grade |
ASTM |
C10100,C11000,C12200,C21000,C22000,C23000,C24000,C26000, |
|
G/B |
TU1,T2,TP2,H96,H90,H85,H80,H70,H65,H63,H62,H59,HPb63-3, |
|
|
JIS |
C 1011,C 1100,C 1220,C3604,C 2100,C 2200,C 2300,C 2400, C 2600, |
|
|
BS |
Cu-OFE,C 101,Cu-DHP,CZ 125,CZ 101,CZ 102,CZ 103,CZ 106,CZ 107, CZ 108,CZ 109,CZ 123,CZ 124, CZ 121,CZ 111,CZ 133, Pb 104, |
|
|
DIN/ISO |
CuZn5,CuZn10,CuZn15,CuZn20,CuZn30,CuZn35,CuZn33,CuZn36, |
|
|
Shape |
Round, Square, Flat, Hexagon, Oval, Half-round or Customized |
|
|
Dimension |
Bar/Rod |
Standard(Diameter 5-160 mm) or Customized |
|
Wire |
Standard(Diameter 0.02-6 mm) or Customized |
|
|
Plate/Sheet |
Standard(T 0.2-50 mm/W 200-3000 mm/L 6000 mm) or Customized |
|
|
Strip |
Standard(T 0.05-1.5 mm/W 20-600 mm/L 20000 mm) or Customized |
|
|
Tube/Pipe |
Standard(OD 3-360mm/Wall thickness 0.5-50 mm) or Customized |
|
|
Standard |
GB/T,JIS,ASTM, ISO, DIN, BS, NF etc. |
|
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard. |
|
|
Package |
Plastic film + Wooden case or as per customer requirement |
|
|
Surface |
Polished,bright,oiled,hair line,brush,mirror,or as required |
|
|
Deliver time |
According to order's quantity. |
|
|
Shipment |
By sea, by air, DHL, UPS, FedEx etc. or as required |
|
|
Application |
Electric light industry, machinery manufacturing, Building industry ,defense industry, and other fields Manufacturing industrial |
|
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Square,Rectangular,etc. |
||
|
Specifications |
Diameter:3~200mm |
||
|
Length |
3m,5.8m, 6m, 11.8m, 12m, or as required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Export to |
Singapore,Indonesia,Ukraine,Korea,Thailand, Vietnam, Saudi Arabia, Brazil, Spain, |
||
|
Application |
Copper plates are mainly used in electrical conductivity, heat conduction, and corrosion-resistant equipment. For instance, they are applied in wires, cables, conductive screws, blasting detonators, evaporators for chemical industries, storage containers, and various pipelines, etc. They can also be used as force-bearing parts for various deep drawing and bending manufacturing processes, such as pins, rivets, washers, nuts, conduits, pressure gauges, screens, and radiator parts, etc. |
||
|
Contact |
If any requirement please feel free to inform me at any time. |
||
|
Grade |
C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920, C10930,C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300, C12500,C14200,C14420,C14500,C14510,C14520,C14530,C17200,C19200, C21000,C23000,C26000,C27000,C27400,C28000,C33000,C33200,C37000, C44300,C44400,C44500,C60800,C63020,C65500,C68700,C70400,C70620, C71000,C71500,C71520,C71640,C72200,T1,T2,T3,etc |
|
Standard |
JIS ASTM DIN EN ISO |
|
Diameter |
0.3-5mm/custom |
|
Length |
custom |
|
Surface |
mill,polished,bright,mirror,hair line,brush,checkered,antique,sand blast,etc |
|
Application |
Building, industry etc |
|
Payment Terms |
T/T or L/C at sight |
|
Delivery time |
5-15 days after receiving L/C or deposit |
|
Remark |
Specific requirement of alloy grade,temper or specification can be discussed at your request |
