What Is Red Copper
Red copper is pure copper, named for its purple-red color. The density of pure copper is 8.96 g per cubic centimeter, and the melting point is 1083 degrees C. Pure copper has excellent electrical and thermal conductivity, good plasticity, and is easy to process by hot pressing and cold pressing, making it widely used in wires, cables, brushes, and other products requiring good conductivity.
Mass Calculation Formula
The mass of a red copper tube can be calculated using the formula G equals 8.96 multiplied by pi multiplied by the wall factor delta multiplied by the quantity D minus delta, all divided by 1000, where G is the mass in kilograms, delta is the tube wall thickness in millimeters, and D is the tube diameter in millimeters. This formula converts the tube's cross-sectional area and length into mass using the density of pure copper.
Grades Suitable for Copper Tubes
The grades of copper suitable for manufacturing red copper tubes are T1 and T2 per GB/T 5231. T1 has a minimum copper plus silver content of 99.95 percent with phosphorus 0.001 percent, bismuth 0.001 percent, antimony 0.002 percent, arsenic 0.002 percent, iron 0.005 percent, nickel 0.002 percent, lead 0.003 percent, tin 0.002 percent, sulfur 0.005 percent, zinc 0.005 percent, and oxygen 0.02 percent maximum. T2 has a minimum copper plus silver content of 99.90 percent with similar tight impurity controls.
Thermal and Physical Properties
The thermal conductivity of copper tube is about 384 W per meter per Kelvin, and the specific heat is about 0.394 kJ per kilogram per Kelvin. These high values are why copper tubes are preferred for heat exchange equipment and for applications requiring rapid and uniform heat transfer.
Applications
Copper tubes are used in heat exchangers, condensers, solar water heaters, HVAC systems, and low-temperature pipelines in oxygen production equipment. Small-diameter tubes transport pressurized liquids in lubrication and oil pressure systems and serve as instrument pressure lines.
Frequently Asked Questions
Q: What is the density of pure copper?
A: 8.96 g per cubic centimeter.
Q: What is the melting point of copper?
A: 1083 degrees C.
Q: How is copper tube mass calculated?
A: G equals 8.96 times pi times wall thickness times D minus wall thickness, divided by 1000.
Q: What grades are used for copper tubes?
A: T1 and T2 with minimum copper plus silver of 99.95 and 99.90 percent.
Q: What is the thermal conductivity of copper?
A: About 384 W per meter per Kelvin.
Q: What is the specific heat of copper?
A: About 0.394 kJ per kilogram per Kelvin.
Contact us for T1 and T2 copper tubes with certified composition and dimensional accuracy.







