What Is C11000 Copper
C11000, designated Cu-ETP for electrolytic tough pitch copper, is one of the most widely used copper grades. Copper and copper alloys are common in plumbing and heat exchanger service because copper has good thermal conductivity and is relatively easy to form, since the material is very ductile. Pure seamless copper pipe has an orange-pinkish tinge that is naturally occurring, and in many cases the metal is also used as a decorative component. Square C11000 tube is also used in the shipping industry because it fits the twin criteria of conductivity and strength.
Copper Pipe Size Chart
Standard copper water tube sizes follow the nominal size system with outside and inside diameters for Types K, L, and M. For example, half-inch nominal tube has an outside diameter of 15.875 mm with inside diameters of 13.411 mm for Type K, 13.843 mm for Type L, and 14.453 mm for Type M. The range extends from quarter-inch nominal up to 3 inches and beyond, with wall thickness increasing from Type M to Type K for higher pressure service.
Material Specifications
Copper tube is supplied against ASTM B280 for air conditioning and refrigeration, ASTM B75 for seamless tube, ASTM B88 for water tube, JIS H3300, EN 1057, and DIN standards. Common material designations include TU2, C1020T, C10200, T2, C1100, TP1, C1201T, C1200, TP2, C1220T, C12200, C14200, and C19400. Sizes range from 2 mm to 610 mm outer diameter with wall thicknesses from 0.5 mm to 80 mm, and round, square, rectangular, and finned tube forms are available.
Mechanical Properties
For C12200 tube per ASTM B280 and B68, copper content is above 99.9 percent with phosphorus 0.015 to 0.040 percent. In the annealed temper the tensile strength is above 205 MPa with elongation above 40 percent, while the hard temper provides above 245 MPa with reduced elongation. Grain size is controlled above 0.040 mm for formed service.
Applications
C11000 square tube and round tube are used in offshore oil drilling companies, power generation, petrochemicals, gas processing, specialty chemicals, pharmaceuticals, chemical equipment, seawater equipment, heat exchangers, condensers, and the pulp and paper industry. The combination of thermal conductivity and formability makes copper tube the standard for heat transfer equipment.
Quality Control
Rigorous quality control is conducted through spectrometers for material verification, tensile testers, eddy current testers, and hydrostatic pressure testers, guaranteeing that all products meet international standards for performance and durability.
Frequently Asked Questions
Q: What does Cu-ETP mean?
A: Electrolytic tough pitch copper, grade C11000.
Q: What standards cover C11000 tube?
A: ASTM B280, B75, B88, JIS H3300, and EN 1057.
Q: What sizes are available?
A: Outer diameters from 2 mm to 610 mm with walls from 0.5 mm.
Q: What is the tensile strength of annealed copper tube?
A: Above 205 MPa with elongation above 40 percent.
Q: What applications use C11000 square tube?
A: Heat exchangers, condensers, chemical, and offshore equipment.
Q: Can copper tube be used decoratively?
A: Yes, its natural orange-pink tinge suits decorative components.
Contact us for C11000 round, square, and rectangular tubes with certified composition and test reports.







