Cu-HCP ( CW021A )


| Grade : | Cu-HCP |
| Number: | CW021A |
| Classification: | Phosphorus-containing copper grade |
| Density | 8.9 g/cm ³ |
| Standard: | EN 13601: 2002 Copper and copper alloys. Copper rod, bar and wire for general electrical purposes EN 13600: 2002 Copper and copper alloys. Seamless copper tubes for electrical purposes EN 1976: 1998 Copper and copper alloys. Cast unwrought copper products EN 13599: 2002 Copper and copper alloys. Copper plate, sheet and strip for electrical purposes EN 13605: 2002 Copper and copper alloys. Copper profiles and profiled wire for electrical purposes EN 12165: 1998 Copper and copper alloys. Wrought and unwrought forging stock EN 12420: 1999 Copper and copper alloys. Forgings |
| Equivalent grades: | Go here |
Chemical composition % of grade Cu-HCP ( CW021A )
| Cu including Ag < 0.015% |
| P | Cu | Pb | Bi | Others |
| 0.002 - 0.007 | min 99.95 | max 0.005 | max 0.0005 | total 0.03 |
Mechanical properties of grade Cu-HCP ( CW021A )
| Rm - Tensile strength (MPa) (R200) | 200 |
| Rp0.2 0.2% proof strength (MPa) (R200) | 50 |
| A - Min. elongation at fracture (%) (R200) | 30 |
| Brinell hardness (HB): (H040) (R200) | 40 |
Properties Cu-HCP
| Volume resistivity = 0.01754 - 0.01818 Ω*mm²/m ; |
Equivalent grades of grade Cu-HCP ( CW021A )
Warning! Only for reference
| EU EN |
Germany DIN,WNr |
||
| Cu-HCP |
|
Casting process
| GS | Sand casting |
| GM | Permanent mould casting |
| GZ | Centrifugal casting |
| GC | Continuous casting |
| GP | Pressure die casting |
Material conditions
| R | Material condition designated by the minimum value of tensile strength requirement for the product with mandatory tensile strength and elongation requirements |
| H | Material condition designated by the minimum value of hardness requirement for the product with mandatory hardness requirements |
Mechanical properties
| ReH | Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale |
| Rm | Tensile strength / Zugfestigkeit / Resistance a la traction |
| A | Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal |
| J | Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc |
|
Cu-HCP ( CW021A ) Phosphorus-containing copper grade |







