CuAl8Fe3 ( CW303G )
| Grade : | CuAl8Fe3 |
| Number: | CW303G |
| Classification: | Cupper alloy |
| Density | 7.7 g/cm ³ |
| Standard: | EN 1653: 1998 Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units EN 1652: 1998 Copper and copper alloys. Plate, sheet, strip and circles for general purposes EN 12165: 1998 Copper and copper alloys. Wrought and unwrought forging stock EN 12420: 1999 Copper and copper alloys. Forgings |
| Equivalent grades: | Go here |
Chemical composition % of grade CuAl8Fe3 ( CW303G )
| Fe | Si | Mn | Ni | Al | Pb | Zn | Sn | Others | - |
| 1.5 - 3.5 | max 0.2 | max 1 | max 1 | 6.5 - 8.5 | max 0.05 | max 0.5 | max 0.1 | total 0.2 | Cu - remainder |
Mechanical properties of grade CuAl8Fe3 ( CW303G )
| Rm - Tensile strength (MPa) (R480) | 480 |
| Rp0.2 0.2% proof strength (MPa) (R480) | 210 |
| A - Min. elongation at fracture (%) (R480) | 30 |
| Vickers hardness ( HV): (H110) | 110 |
Equivalent grades of grade CuAl8Fe3 ( CW303G )
Warning! Only for reference
| EU EN |
Germany DIN,WNr |
||
| CuAl8Fe3 |
|
Casting process
| GS | Sand casting |
| GM | Permanent mould casting |
| GZ | Centrifugal casting |
| GC | Continuous casting |
| GP | Pressure die casting |
Material conditions
| R | Material condition designated by the minimum value of tensile strength requirement for the product with mandatory tensile strength and elongation requirements |
| H | Material condition designated by the minimum value of hardness requirement for the product with mandatory hardness requirements |
Mechanical properties
| ReH | Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale |
| Rm | Tensile strength / Zugfestigkeit / Resistance a la traction |
| A | Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal |
| J | Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc |
|
CuAl8Fe3 ( CW303G ) Cupper alloy |
