CuAl10Ni5Fe4 ( CW307G )
| Grade : | CuAl10Ni5Fe4 |
| Number: | CW307G |
| Classification: | Cupper alloy |
| Density | 7.6 g/cm ³ |
| Standard: | EN 1653: 1998 Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units EN 12163: 1998 Copper and copper alloys. Rod for general purposes EN 12167: 1998 Copper and copper alloys. Profiles and rectangular bar for general purposes EN 12165: 1998 Copper and copper alloys. Wrought and unwrought forging stock EN 12420: 1999 Copper and copper alloys. Forgings |
| Equivalent grades: | Go here |
Chemical composition % of grade CuAl10Ni5Fe4 ( CW307G )
| Fe | Si | Mn | Ni | Al | Pb | Zn | Sn | Others | - |
| 3 - 5 | max 0.2 | max 1 | 4 - 6 | 8.5 - 11 | max 0.05 | max 0.4 | max 0.1 | total 0.2 | Cu - remainder |
Mechanical properties of grade CuAl10Ni5Fe4 ( CW307G )
| Rm - Tensile strength (MPa) (R590) | 590 |
| Rm - Tensile strength (MPa) (R620) | 620 |
| Rp0.2 0.2% proof strength (MPa) (R590) | 230 |
| Rp0.2 0.2% proof strength (MPa) (R620) | 250 |
| A - Min. elongation at fracture (%) (R590) | 14 |
| Vickers hardness ( HV): (R590) | 160 |
| Vickers hardness ( HV): (R620) | 180 |
Equivalent grades of grade CuAl10Ni5Fe4 ( CW307G )
Warning! Only for reference
| EU EN |
USA - |
Germany DIN,WNr |
Japan JIS |
France AFNOR |
England BS |
Italy UNI |
Poland PN |
Czechia CSN |
Austria ONORM |
Russia GOST |
Inter ISO |
||||||||||||
| CuAl10Ni5Fe4 |
|
|
|
|
|
|
|
|
|
|
|
Casting process
| GS | Sand casting |
| GM | Permanent mould casting |
| GZ | Centrifugal casting |
| GC | Continuous casting |
| GP | Pressure die casting |
Material conditions
| R | Material condition designated by the minimum value of tensile strength requirement for the product with mandatory tensile strength and elongation requirements |
| H | Material condition designated by the minimum value of hardness requirement for the product with mandatory hardness requirements |
Mechanical properties
| ReH | Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale |
| Rm | Tensile strength / Zugfestigkeit / Resistance a la traction |
| A | Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal |
| J | Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc |
|
CuAl10Ni5Fe4 ( CW307G ) Cupper alloy |
