CuZn36Pb2Sn1 ( CW711R )



| Grade : | CuZn36Pb2Sn1 |
| Number: | CW711R |
| Classification: | Complex copper-zinc alloy |
| Density | 8.5 g/cm ³ |
| Standard: | EN 12164: 1998 Copper and copper alloys. Rod for free machining purposes EN 12168: 1998 Copper and copper alloys. Hollow rod for free machining purposes |
| Equivalent grades: | No information |
Chemical composition % of grade CuZn36Pb2Sn1 ( CW711R )
| Fe | Ni | Cu | Pb | Sn | Others | - |
| max 0.1 | max 0.3 | 59.5 - 61.5 | 1.3 - 2.2 | 0.5 - 1 | total 0.2 | Zn - remainder |
Mechanical properties of grade CuZn36Pb2Sn1 ( CW711R )
| Rm - Tensile strength (MPa) ((R370) | 370 |
| Rm - Tensile strength (MPa) (R410) | 410 |
| Rp0.2 0.2% proof strength (MPa) ((R370) | 220 |
| Rp0.2 0.2% proof strength (MPa) (R410) | 250 |
| A - Min. elongation at fracture (%) (R370) | 22 |
| A - Min. elongation at fracture (%) (R410) | 18 |
| A - Min. elongation Lo = 100mm (%) (R410) | 12 |
| Brinell hardness (HB): (R370) | 110 |
| Brinell hardness (HB): (R410) | 125 |
Casting process
| GS | Sand casting |
| GM | Permanent mould casting |
| GZ | Centrifugal casting |
| GC | Continuous casting |
| GP | Pressure die casting |
Material conditions
| R | Material condition designated by the minimum value of tensile strength requirement for the product with mandatory tensile strength and elongation requirements |
| H | Material condition designated by the minimum value of hardness requirement for the product with mandatory hardness requirements |
Mechanical properties
| ReH | Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale |
| Rm | Tensile strength / Zugfestigkeit / Resistance a la traction |
| A | Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal |
| J | Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc |
|
CuZn36Pb2Sn1 ( CW711R ) Complex copper-zinc alloy |







