CuZn37Mn3Al2PbSi ( CW713R )
| Grade : | CuZn37Mn3Al2PbSi |
| Number: | CW713R |
| Classification: | Complex copper-zinc alloy |
| Density | 8.1 g/cm ³ |
| Standard: | EN 12164: 1998 Copper and copper alloys. Rod for free machining purposes EN 12167: 1998 Copper and copper alloys. Profiles and rectangular bar for general purposes EN 12168: 1998 Copper and copper alloys. Hollow rod for free machining purposes EN 12165: 1998 Copper and copper alloys. Wrought and unwrought forging stock EN 12449: 1999 Copper and copper alloys. Seamless, round tubes for general purposes EN 12420: 1999 Copper and copper alloys. Forgings |
| Equivalent grades: | Go here |
Chemical composition % of grade CuZn37Mn3Al2PbSi ( CW713R )
| Fe | Si | Mn | Ni | Al | Cu | Pb | Sn | Others | - |
| max 1 | 0.3 - 1.3 | 1.5 - 3 | max 1 | 1.3 - 2.3 | 57 - 59 | 0.2 - 0.8 | max 0.4 | total 0.3 | Zn - remainder |
Mechanical properties of grade CuZn37Mn3Al2PbSi ( CW713R )
| Rm - Tensile strength (MPa) (R540) | 540 |
| Rm - Tensile strength (MPa) (R570) | 570 |
| Rp0.2 0.2% proof strength (MPa) (R540) | 280 |
| Rp0.2 0.2% proof strength (MPa) (R570) | 300 |
| A - Min. elongation at fracture (%) (R540) | 15 |
| A - Min. elongation at fracture (%) (R570) | 12 |
| Brinell hardness (HB): (R540) | 150 |
| Brinell hardness (HB): (R570) | 150 |
Equivalent grades of grade CuZn37Mn3Al2PbSi ( CW713R )
Warning! Only for reference
| EU EN |
Germany DIN,WNr |
||
| CuZn37Mn3Al2PbSi |
|
Casting process
| GS | Sand casting |
| GM | Permanent mould casting |
| GZ | Centrifugal casting |
| GC | Continuous casting |
| GP | Pressure die casting |
Material conditions
| R | Material condition designated by the minimum value of tensile strength requirement for the product with mandatory tensile strength and elongation requirements |
| H | Material condition designated by the minimum value of hardness requirement for the product with mandatory hardness requirements |
Mechanical properties
| ReH | Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale |
| Rm | Tensile strength / Zugfestigkeit / Resistance a la traction |
| A | Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal |
| J | Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc |
|
CuZn37Mn3Al2PbSi ( CW713R ) Complex copper-zinc alloy |
