What is H68 brass?
H68 brass is a copper-zinc alloy widely used in industry and daily life. Its copper content is approximately 68%, and its zinc content is about 32%. Due to its excellent physical, chemical, and mechanical properties, H68 brass holds a significant position in fields such as electronics, machinery, and construction. The following is a detailed introduction to H68 brass.
Physical Properties
Density and Melting Point: The density of H68 brass is about 8.47 g/cm³, and its melting point is between 930°C and 940°C, making it suitable for high-temperature environment applications.
Electrical and Thermal Conductivity: Its electrical conductivity is about 27% IACS, and its thermal conductivity is 120 W/(m·K), making it suitable for electrical components and heat dissipation equipment.
Mechanical Properties:
Tensile strength is as high as 370 MPa (some data mention it can reach 660 MPa), with elongation δ10 not less than 15%, demonstrating high strength and good ductility.
The modulus of elasticity is about 105 GPa, and the Brinell hardness is HB 80-90, providing wear resistance and resistance to deformation.
Chemical Properties
H68 brass exhibits excellent corrosion resistance in conventional environments but is prone to corrosion cracking in ammonia atmospheres. The improved model H68A adds trace amounts of arsenic, which can prevent dezincification and enhance corrosion resistance.




Machining Performance: It has excellent plasticity, making it easy to cut, weld, and forge. It is suitable for manufacturing complex parts such as bellows and cartridge cases.
Heat Treatment Process:
Hot working temperature: 750-830°C
Annealing temperature: 520-650°C
Low-temperature annealing (stress relief): 260-270°C
Application Areas
Electronics and Electrical: Used in components such as connectors and switches, balancing conductivity and corrosion resistance.
Machinery Manufacturing: Used to manufacture high-strength parts such as gears, bearings, and valves.
Architectural Decoration: Its golden-yellow appearance and corrosion resistance make it an ideal material for door handles and decorative panels.
Other Areas: Water pipes, heat sinks, medical instruments. In the future, it is expected to expand into new energy batteries and 5G base station construction.
Get Dedicated Engineer Support
Our factory
Our factory is equipped with an advanced full-process copper processing production line, specializing in the manufacturing of high-precision copper plates, copper tubes, copper rods, copper wires, and copper strips. The core of our production includes continuous casting and rolling units, precision extrusion lines, high-speed cold rolling equipment, multi-roll precision rolling mills, tube drawing systems, and intelligent stretching production lines. We are also outfitted with comprehensive inspection equipment such as spectrometers and online eddy current flaw detectors, ensuring full-process control from smelting and casting, hot processing, to cold finishing. Our products achieve an accuracy of up to ±0.01mm, with an annual production capacity exceeding 50,000 tons. They are widely used in power, electronics, transportation, and high-end manufacturing sectors. Certified with international standards such as ISO9001 and IATF16949, we are capable of providing global customers with one-stop copper material solutions.

Brass product packaging
We implement a graded and customized packaging system: copper plates are double-wrapped with moisture-proof paper and vapor corrosion inhibitor film before being placed in reinforced wooden crates, which are filled with cushioning materials and equipped with impact-resistant corner protectors; copper tubes and rods are sealed with plastic end caps, wrapped with PE protective film, and then layered into steel-frame logistics containers, with EPE pearl cotton separating each layer; copper wires are automatically wound onto spools, vacuum-sealed, covered with waterproof film, and secured on customized iron-wood pallets; copper strips are wrapped with non-woven fabric, coiled onto high-strength steel cores, and placed into waterproof composite material coils with desiccants inside. All packaging passes ISTA-3A transport testing, and the outer boxes are labeled with international hazardous material identifiers, moisture warnings, and scannable logistics codes, ensuring the cargo withstands moisture, impact, and chemical erosion during global transportation.

Get Fast Quote & Logistics Plan







