We can supply tubes in Copper and Copper Alloys for many applications
Seamless tubes for heat exchanger and condensers
Seamless copper tubes for water and gas in sanitary and heating applications
Seamless copper tubes for air conditioning and refrigeration
Seamless round tubes for general purpose
Heat Exchanger And Condensers Copper Alloy Tubes
| Admiralty C44300 | Highly resistant to general corrosion – where pressures, velocities and temperatures are moderate. |
| Alluminium Brass C68700 | These tubes are especially adapted to resist corrosion by both salt and brackish waters. |
| Copper Nickel 90/10 C70600 | This alloy is highly resistant to corrosion by turbulently flowing sea water indicate it to be an excellent condenser tube alloy for salt water use. |
| Copper Nickel 80/20 C71000 | This alloy has intermediate properties between those of 10% and 30% copper nickel. Tubes of this alloy have found widest use in feedwater heaters and evaporators. |
| Copper Nickel 70/30 C71500 | Condenser tubes of this alloy are giving long and dependable service at sea. It is also highly satisfactory for tubes in evaporators, condensers, and superheaters. This alloy is particularly desirable where high temperatures are encountered. |
Seamless Copper Alloy Condenser Tubes
| Material | European | American |
|---|---|---|
| Copper | EN 12449 – Cu DHP | ASTM B111 / ASTM B 75 C12200 |
| Admiralty Brass | EN 12451 – CuZn28Sn1As | ASTM B111 C44300 |
| Aluminum Brass | EN 12451 – CuZn20AI2As | ASTM B111 C68700 |
| 90/10 Copper Nickel | EN 12451 – CuNi10Fe1Mn | ASTM B111 C70600 |
| 70/30 Copper Nickel | EN 12451 – CuNi30Fe1Mn | ASTM B111 C71500 |
Copper Nickel Pipe Standards and Composition
| Trade Name | UNS | Copper Nickel Industry Specifications | Chemical Composition | Min. Tensile (KSI) |
Min. Yield (KSI) |
Elongation % |
| CuNi 90/10 | UNS C70600 UNS C70620 |
ASME SB111, SB171, SB359, SB395, SB466, SB467, SB543 ASTM B111, B122, B151, B171, B359, B395, B432, B466, B467, B543, B608 DIN 2.0872 MIL C-15726, T-15005, T-16420, T-22214 SAE J461, J463 |
Cu 88.6 min Pb. 05 max* Fe 1.8 max Zn 1 max* Ni 9-11 max Mn 1.0 max |
38 | 15 | 30 |
| CuNi 90/10 | UNS C70600 | EEMUA 144 90/10, 145 90/10, 14 90/1 | Cu rem. Pb. 01 max Fe 1.5-2.0 Zn 0.2 max P 0.2 max S 0.2 max Ni 10-11 Mn 0.5-1.0 |
40 | 15 | 30 |
| CuNi 70/30 | UNS C71500 UNS C71520 |
ASME SB111, SB171, SB359, SB395, SB466, SB467, SB543 ASTM B111, B122, B151, B171, B359, B395, B432, B467, B543, B552, B608, F467, F468 DIN 2.0882 MIL C-15726, T-15005, T-16420, T-22214 SAE J461, J463 |
Cu rem (65.0 min) Pb. 05 max* Fe 0.4-1.0 Zn 1 max* Ni 29-33 Mn 1 max |
52 | 18 | 45 |
| CuNi 70/30 | UNS C71640 | ASTM B111, B543, B552 | Cu rem Pb. 05 max* Fe 1.7-2.3 Zn 1 max* Ni 29-32 Mn 1.5-2.5 |
63 | 25 | – |
Copper products that GNEE can provide
|
Product Name |
Straight Copper Pipe/Pancake Coil Copper Pipe/Capillary copper pipe |
|
Material |
C10100,C10200,C12000,C12200,C11000,T1,T2,T3,TP2,TU1,TU2,TU3,H62, H65,H70,etc |
|
Standard |
ASTM B280,ASTM B68,ASTM B75,ASTM B88 JIS H3300 EN12735,AS1571 |
|
Shape Type |
Straight Round,Square,Rectangular,Coil,Oval,Half-Round |
|
Wall Thickness |
0.2-3mm |
|
Out Diameter |
3mm-100mm |
|
Length |
1M-6M or As your demand (Pancake copper tube usual length: 15 meters) |
|
Cu |
High Purity 99.9% Copper |
|
Temper |
Soft(M),Half Soft(M2) and Half Hard(Y2) |
|
Surface Treatment |
Bright and Clean |
|
Package Type |
Plastic Film With Plastic Caps on the both ends and Wooden Case Carton Package or as your demand |
|
Application |
Refrigerator,Condenser and Heat Exchange,Decoration,Water Tube,Precision Equipment etc |
|
Item |
Straight copper rod/copper round bar |
||
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Round,Square,Rectangular,etc. |
||
|
Specifications |
Diameter:3~200mm |
||
|
Length |
3m,5.8m, 6m, 11.8m, 12m, or as required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Application |
A copper rod is a type of colored metal processing bar stock with high electrical conductivity. It is mainly divided into brass |
||
|
Contact |
If any requirement please feel free to inform me at any time. |
||
|
Size |
Width: 10mm to 2000mm, |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard. |
||
|
Surface |
Polished,bright,oiled,hair line,brush,mirror,or as required |
||
|
Export to |
Ireland,Singapore,Indonesia,Ukraine,Saudi Arabia,Spain,Canada,USA, |
||
|
Package |
Plastic film with Wooden case or wooden pallet |
||
|
Delivery time |
Prompt delivery or upon your order quantity. |
||
|
Quality Control |
Mill Test Certification is supplied with shipment,Third Part Inspection is acceptable. |
||
|
Application |
widely used inair conditioners,refrigerators,electric,solar water heater, polished pipe an be used in decorative,such as stair rail. |
||
|
Shape |
Round, Square, Oval, can be customized |
||
|
Model Number |
C11000, C10200, C12000, C12200 C26800 C27000 C35000 C38000 etc. |
||
|
Color |
Red Cppper , Brass |
||
|
Hardness |
1/16 hard, 1/8 hard, 3/8 hard, 1/4 hard, 1/2hard, full hard, soft, etc |
||
|
Diameter |
0.10mm-5.00mm |
||
|
Insulation Material |
Enameled |
||
|
Certification |
ISO9001 |
||
|
Advantages |
High conductivity,Good solderability,High ductility |
||
|
Coating |
Double Layer or customized |
||
|
Packing |
Standard export package or seaworthy Package |
||
|
Application |
1. Pancake Coil for ACR, General Engineering Applications |
||
copper CNC machined parts
|
Precision of piece: |
+/-0.01mm |
||
|
Roughness of piece: |
Ra≤0.1 |
||
|
Quality standard: |
DIN, ASTM, GOST, GB, JIS, ANSI, BS; |
||
|
Drawing format: |
JPEG,PDF,AI,PSD,DWG,DXF,IGS,STEP; |
||
|
Products certification: |
ISO9001:2008, CE, RoHS, SGS; |
||
|
Dimension: |
Dia.500mm or 850mm width |
||
|
Available materials |
Steel: carbon steel, alloy steel, stainless steel, 4140,20#,45# ,40Cr,20Cr ,etc |
||
|
Aluminum: AL6061,AL6063,AL6082,AL7075,AL5052 etc. |
|||
|
Stainless steel: 201SS,301SS,304SS,316SS etc. |
|||
|
Brass: C37700,C28000, C11000,C36000 etc |
|||
|
Plastics: PTFE,PEEK,POM,PA,UHMW, NYLON |
|||
|
Surface treatment: |
Steel parts |
Stainless steel parts |
Aluminum parts |
|
Galvanization |
Polishing |
anodized |
|
|
Black oxidation |
Passivation |
Sandblast anodized |
|
|
Nickel plating |
Laser engraving |
Colorful anodized |
|
|
Chrome plating |
Sand blast |
Brushed |
|
|
Heat treatment |
|
Polishing |
|
|
Powder coated |
|
Chrome plating |
|
Why choose us?
Since our establishment in 2008, our company has specialized in the production and export of copper products. We utilize advanced production lines and a comprehensive quality control system. From raw materials to finished products, every step is rigorously inspected using precision instruments (such as spectrometers, metallographic microscopes, and conductivity testers) to ensure that our products meet international standards for composition, dimensions, and performance. We are committed to providing high-quality, high-precision copper products and reliable service to our global customers.
Email:sales@gneesteel.com
active members
years experience
Square Meters Built
Cooperating Partner
