We are a professional manufacturer and exporter of ASTM B111 C71500 Copper Nickel Tube ,BFe30-1-1 ,CuNi30Mn1Fe,CUNI 70/30 cupronickel tube ,Copper Nickel Tube, cupronickel tube in China.
China C71500 Copper Nickel, also known as 70/30 Copper Nickel, offers excellent corrosion resistance, especially in marine saltwater environments. The main wrought Copper Nickel alloys chosen for sea water service contain 30% Nickel.
Standards: ASTM B111/ ASME SB111, ASTM B251, BS EN1057
Size range: OD 2.0 to 406 mm, WT 0.3 to 50mm, Length 18m or as request.
Testing: 100% Eddy Current Testing, 100% hydraulic Testing.
Delivered in straight lengths or as U-bent tubes.
We also supply copper alloy complementary products for heat exchanger applications.
Finned Tube,Tubesheet, EEMU 146 pipe fitting, EEMU 145 pipe flange etc.
Copper Nickel 70-30 Tubes – C71500 – Has, In General, The Best Resistance Of Any Of The Copper Alloys To Impingement Attack And To Corrosion From Most Acids And Waters. It Is Being Used In Severe Corrosive Conditions In Which Service Lives Longer Than Those Of Other Copper Alloys Are Desired.
|
Standard Grade |
ASTM B 111 |
EN 12451 |
DIN |
BS 2871 |
JIS H3300 |
GB/T8890 |
|
Cu |
Bal. |
Bal. |
Bal. |
Bal. |
Bal. |
Bal. |
|
Pb |
0.05 Max |
0.02 Max |
0.03 Max |
0.01 Max |
0.05 Max |
0.02 Max |
|
Fe |
0.4-1.0 |
0.4-1.0 | 0.4-1.0 | 0.4-1.0 |
0.2-1.0 |
0.5-1.0 |
|
Ni |
29.0-33.0 |
30.0-32.0 |
30.0-32.0 | 30.0-32.0 |
29.0-33.0 |
29.0-32.0 |
|
Zn |
1.0 Max |
0.5 Max |
0.5 Max |
– |
0.5 Max |
0.3 Max |
|
S |
– |
0.05 Max |
0.06 Max |
0.08 Max |
– | 0.05 Max |
|
P |
– |
0.02 Max |
– |
– |
– |
0.06 Max |
|
Mn |
1.0 Max |
0.5-1.5 |
0.5-1.5 |
0.5-1.5 |
0.2-1.0 |
0.5-1.2 |
|
C |
– |
0.05 Max |
0.06 Max | 0.06 Max | – | 0.05 Max |
|
Sn |
– |
0.05 Max |
– | – | – | 0.03 Max |
|
Total Impurities |
– |
0.2 Max |
0.1 Max |
0.3 Max |
– |
0.7 Max |
|
Condition |
O61 |
R370 |
F37 |
M |
O |
M |
|
HR50 |
R480 |
– |
O |
– |
Y2 |
|
|
– |
– |
– |
– |
– |
– |
|
|
Yield Strength |
125 Min |
120 Min |
120-220 |
– |
– |
– |
| 345 Min |
300 Min |
– |
– |
– |
– |
|
|
– |
– |
– |
– |
– |
– |
|
|
Tensile Strength |
360 Min. |
370 Min |
370 Min |
– |
363 Min |
370 Min |
|
495 Min. |
480 Min |
– |
– |
– |
490 Min | |
|
– |
480 Min. |
– |
– |
– |
– |
|
|
Elongation (%) |
– |
35 Min |
35 Min |
– |
30 Min |
30 Min |
| 12min. (WT<1.21 Mm) |
12 Min |
– |
– |
– |
10 Min |
|
| 15 Min. (WT>1,21 Mm) | – |
– |
– |
– |
– |
|
|
Hardness Hv5 |
– |
– |
– |
150 Min |
– |
– |
|
– |
– |
– |
90-120 |
– |
– |
|
|
Typical Use |
This Alloy Has All The Characteristics Of CuNi 90/10, But Also Offers Excellent Corrosion Resistance In High Velocity Sea Water. Also The Operating Temperature Is Much Higher Than Of CuNi 90/10. Can Assure A Long Service Life And Reliability. Melting Point: 1240°C • Hot Working Properties: Good Density (20°C): 8,94 G/Cm3 • Cold Working Properties: Good |
|||||
| Weight Formula | Average Wall: (OD-WT) X WT X 0,0284 = Kg/M (All Sizes In Mm) Minimum Wall: (OD-WT) X WT X 0,0295 = Kg/M (All Sizes In Mm) |
|||||
Application range: Copper-Nickel Alloy tube for condenser and heat-exchangers, Water Evaporators, Boiler Blowdown Heat Exchangers, air coolers, Gland Steam Condensers, Steam Ejector, Turbine Oil Coolers, Fuel Oil Heaters, Compressed Air Inter and After Coolers, Ferrules, Oil Well Pump Liner, and Distiller etc.
ASTM B111
Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
This specification covers seamless tube and ferrule stock of copper and various copper alloys up to 3 1/8in, inclusive, in diameter, for use in surface condensers, evaporators, and heat exchangers. Tubes for this application are normally made from the following coppers or copper alloys:
| Copper orCopperAlloy UNS No.3 | Previously UsedDesignation | Type of Metal |
| C10100 | OFE | Oxygen-free electronic |
| C10200 | OF | Oxygen-free without residual de-oxidants |
| C10300 | . . . | Oxygen-free, extra low phosphorus |
| C10800 | . . . | Oxygen-free, low phosphorus |
| C12000 | DLPA | Phosphorized, low residual phosphorus |
| C12200 | DHPA | Phosphorized, high residual phos-phorus |
| C14200 | DPAA | Phosphorized, arsenical |
| C19200 | . . . | Phosphorized, 1 % iron |
| C23000 | . . . | Red Brass |
| C28000 | . . . | Muntz Metal |
| C44300 | . . . | Admiralty Metals, B, C, and D |
| C44400 | ||
| C44500 | ||
| C60800 | . . . | Aluminum Bronze |
| C61300 | . . . | |
| C61400 | . . . | Aluminum Bronze, D |
| C68700 | . . . | Aluminum Brass, B |
| C70400 | . . . | 95-5 Copper-Nickel |
| C70600 | . . . | 90-10 Copper-Nickel |
| C71000 | . . . | 80-20 Copper-Nickel |
| C71500 | . . . | 70-30 Copper-Nickel |
| C71640 | . . . | Copper-nickel-iron-manganese |
| C72200 | . . . | . . . |




Applications of C71500 Copper-Nickel Tubes:
Marine & Shipbuilding – Used in seawater cooling, heat exchangers, condensers
Oil & Gas Industry – Offshore platforms, desalination plants, piping systems
Power Generation – Heat exchangers, nuclear power plants, cooling systems
Aerospace & Defense – Hydraulic tubing, high-performance applications
Chemical Processing – Acid-resistant piping, corrosion-resistant equipment
C71500 Copper-Nickel Tubes (CuNi 70/30) are high-performance copper-based alloys containing 70% copper and 30% nickel, with small additions of iron and manganese for superior corrosion resistance, strength, and durability. These tubes are widely used in marine, offshore, heat exchanger, and industrial piping systems due to their excellent resistance to seawater, biofouling, and stress corrosion cracking.
Copper products that GNEE can provide
|
Product Name |
Straight Copper Pipe/Pancake Coil Copper Pipe/Capillary copper pipe |
|
Material |
C10100,C10200,C12000,C12200,C11000,T1,T2,T3,TP2,TU1,TU2,TU3,H62, H65,H70,etc |
|
Standard |
ASTM B280,ASTM B68,ASTM B75,ASTM B88 JIS H3300 EN12735,AS1571 |
|
Shape Type |
Straight Round,Square,Rectangular,Coil,Oval,Half-Round |
|
Wall Thickness |
0.2-3mm |
|
Out Diameter |
3mm-100mm |
|
Length |
1M-6M or As your demand (Pancake copper tube usual length: 15 meters) |
|
Cu |
High Purity 99.9% Copper |
|
Temper |
Soft(M),Half Soft(M2) and Half Hard(Y2) |
|
Surface Treatment |
Bright and Clean |
|
Package Type |
Plastic Film With Plastic Caps on the both ends and Wooden Case Carton Package or as your demand |
|
Application |
Refrigerator,Condenser and Heat Exchange,Decoration,Water Tube,Precision Equipment etc |
|
Item |
Straight copper rod/copper round bar |
||
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Round,Square,Rectangular,etc. |
||
|
Specifications |
Diameter:3~200mm |
||
|
Length |
3m,5.8m, 6m, 11.8m, 12m, or as required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Application |
A copper rod is a type of colored metal processing bar stock with high electrical conductivity. It is mainly divided into brass |
||
|
Contact |
If any requirement please feel free to inform me at any time. |
||
|
Size |
Width: 10mm to 2000mm, |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard. |
||
|
Surface |
Polished,bright,oiled,hair line,brush,mirror,or as required |
||
|
Export to |
Ireland,Singapore,Indonesia,Ukraine,Saudi Arabia,Spain,Canada,USA, |
||
|
Package |
Plastic film with Wooden case or wooden pallet |
||
|
Delivery time |
Prompt delivery or upon your order quantity. |
||
|
Quality Control |
Mill Test Certification is supplied with shipment,Third Part Inspection is acceptable. |
||
|
Application |
widely used inair conditioners,refrigerators,electric,solar water heater, polished pipe an be used in decorative,such as stair rail. |
||
|
Shape |
Round, Square, Oval, can be customized |
||
|
Model Number |
C11000, C10200, C12000, C12200 C26800 C27000 C35000 C38000 etc. |
||
|
Color |
Red Cppper , Brass |
||
|
Hardness |
1/16 hard, 1/8 hard, 3/8 hard, 1/4 hard, 1/2hard, full hard, soft, etc |
||
|
Diameter |
0.10mm-5.00mm |
||
|
Insulation Material |
Enameled |
||
|
Certification |
ISO9001 |
||
|
Advantages |
High conductivity,Good solderability,High ductility |
||
|
Coating |
Double Layer or customized |
||
|
Packing |
Standard export package or seaworthy Package |
||
|
Application |
1. Pancake Coil for ACR, General Engineering Applications |
||
copper CNC machined parts
|
Precision of piece: |
+/-0.01mm |
||
|
Roughness of piece: |
Ra≤0.1 |
||
|
Quality standard: |
DIN, ASTM, GOST, GB, JIS, ANSI, BS; |
||
|
Drawing format: |
JPEG,PDF,AI,PSD,DWG,DXF,IGS,STEP; |
||
|
Products certification: |
ISO9001:2008, CE, RoHS, SGS; |
||
|
Dimension: |
Dia.500mm or 850mm width |
||
|
Available materials |
Steel: carbon steel, alloy steel, stainless steel, 4140,20#,45# ,40Cr,20Cr ,etc |
||
|
Aluminum: AL6061,AL6063,AL6082,AL7075,AL5052 etc. |
|||
|
Stainless steel: 201SS,301SS,304SS,316SS etc. |
|||
|
Brass: C37700,C28000, C11000,C36000 etc |
|||
|
Plastics: PTFE,PEEK,POM,PA,UHMW, NYLON |
|||
|
Surface treatment: |
Steel parts |
Stainless steel parts |
Aluminum parts |
|
Galvanization |
Polishing |
anodized |
|
|
Black oxidation |
Passivation |
Sandblast anodized |
|
|
Nickel plating |
Laser engraving |
Colorful anodized |
|
|
Chrome plating |
Sand blast |
Brushed |
|
|
Heat treatment |
|
Polishing |
|
|
Powder coated |
|
Chrome plating |
|

Why choose us?
Since our establishment in 2008, our company has specialized in the production and export of copper products. We utilize advanced production lines and a comprehensive quality control system. From raw materials to finished products, every step is rigorously inspected using precision instruments (such as spectrometers, metallographic microscopes, and conductivity testers) to ensure that our products meet international standards for composition, dimensions, and performance. We are committed to providing high-quality, high-precision copper products and reliable service to our global customers.
Email:sales@gneesteel.com
active members
years experience
Square Meters Built
Cooperating Partner







