What is a C11000 copper pipe?
110 Copper is a high purity material consisting of no less than 99.9% copper. Sometimes C11000 is also referred to as electrolytic tough pitch or ETP Copper. All GNEE C11000 Copper is manufactured by a closely controlled extrusion process to ensure maximum electrical conductivity and formability.
Common Applications
Busbars
Conductors
Gaskets
Heat Exchangers
Radiators
Roof Flashings
Terminals
Key Features
High electrical conductivity
Ductile and highly formable
Corrosion Resistant
High thermal conductivity


Chemical Composition
| Element | Symbol | Nominal % |
| Copper | Cu | 99.9 |
| Other | 0.10 max |
Mechanical Properties
| Material | Metric Values |
| Tensile Strength Min | 255 N/mm² |
| Yield Strength Min | ≥ 180 N/mm² |
| Elongation | ≥ 15% |
| Rockwell Hardness | 77 HR |
Comparative Specifications
BS1433 C101
CW004A
Cu-ETP
DIN 2.0060
Dimensional Tolerances
Flat/Square
| Thickness | Tolerance (mm) | Tolerance (inch) |
| Size Range | ||
| 1⁄8″ to 3⁄16″ | +/-0.076 | +/-0.003 |
| 1⁄4″ to 1⁄2″ | +/-0.102 | +/-0.004 |
| 3⁄4″ to 1″ | +/-0.114 | +/-0.0045 |
| Width | Tolerance (mm) | Tolerance (inch) |
| 1″ to 2″ | +/-0.203 | +/-0.008 |
| 2-1⁄4″ to 4″ | +/-0.305 | +/-0.012 |
| 4-1⁄2″+ | +/-0.457 | +/-0.018 |
Round
| Size Range | Tolerance (mm) | Tolerance (inch) |
| 1⁄4″ to 1⁄2″ | +/-0.038 | +/-0.0015 |
| 3⁄8″ to 1″ | +/-0.051 | +/-0.002 |
| 1-1⁄4″ to 2″ | +/-0.064 | +/-0.0025 |
| 2-1⁄2″ | +/-0.102 | +/-0.004 |
| 3″ | +/-0.127 | +/-0.005 |
| 4″ | +/-0.152 | +/-0.006 |
why choose us

why choose our products
We are a leading manufacturer and exporter specializing in a comprehensive range of high-quality copper products, including copper tubes, copper plates/sheets, copper bars, copper rods, copper wires, and copper strips. Our advanced manufacturing facilities are equipped with state-of-the-art continuous casting lines, extrusion presses, cold rolling mills, and drawing machines to ensure precision and consistency. Rigorous quality control is integral to our process, conducted through spectrometers for material verification, tensile testers, eddy current testers, and hydrostatic pressure testers, guaranteeing that all our products meet international standards for performance and durability.
E-mail: sales@gneesteel.com







