History and development of copper industry



In my country, red copper, that is, natural copper forged by hammering, was already used in the Xia Dynasty 4,000 years ago. Nearly 20 copper artifacts were excavated at the site of Huangniangniangtai in Wuwei, Gansu in 1957 and 1959. After analysis, the copper content in the copper artifacts was as high as 99.63% to 99.87%, all of which were pure copper. Although the exploitable deposits of pure copper were relatively rare in ancient times, it was not difficult to extract it from its ore. The copper extraction method used by the copper mine in Falun, Sweden in the 13th century was to bake the sulfide ore, and then use water to separate the copper sulfate formed. After flowing over the surface of the iron filings, the copper would precipitate, and the thin layer formed would be easily separated. This was the source of the huge wealth of Falun, Sweden at that time.
In my country, the earliest method of extracting copper from natural copper was to use natural copper compounds for wet copper smelting. This is not only the origin of wet technology, but also an invention in the history of world chemistry. The Huainanzi Wanbishu of the Western Han Dynasty records that when Zengqing meets iron, it turns into copper. Zengqing is copper sulfate. This method can be expressed in a modern chemical formula: CuSO4+Fe=FeSO4+Cu. In addition, in 1933, during the excavation of Yinxu in Anyang County, Henan Province, 18.8 kg of malachite, charcoal blocks with a diameter of more than 1 inch, a general helmet made of pottery for copper smelting, and 21.8 kg of coal slag were found, which explained another method used by ancient Chinese people to obtain copper from copper mines more than 3,000 years ago: burning some bright green malachite CuCO3.Cu(OH)2 and dark blue azurite 2CuCO3.Cu(OH)2 in the air to obtain copper oxide, and then reducing it with carbon to obtain metallic copper.
However, since objects made from smelted copper were too soft, easy to bend, and quickly became blunt, people discovered that adding tin to copper to make a copper-tin alloy, bronze, would greatly increase its hardness (if the hardness of tin is set at 5, then the hardness of copper is 30, and the hardness of bronze is 100-150). Since bronze devices are much easier to melt and make than copper, and are hard, easy to melt, easy to cast, and stable in the air, they were also well used in ancient times. The Bronze Age in Chinese history was the result of the widespread use of bronze. Similarly, in about 280 BC, the bronze sun god standing at the port of Rhodes on the island of Rhodes in the Aegean Sea in Europe was 46 meters high, with fingers taller than an adult, and was also made of bronze.







