Copper UNS C10200 Annealed Tube Applicable Specification
| Form | Application | Specific Sub-Form | System | Standard |
|---|---|---|---|---|
| Seamless Condenser Tube & Ferrule Stock | Condenser Tube | ASME | SB111 | |
| Pipe | Seamless | ASTM | B42 | |
| ASTM | B698 | |||
| ASME | SB42 | |||
| Bus Bar | ASTM | B188 | ||
| ASTM | B88M | |||
| Tube, water | ASTM | B88 | ||
| Tube | ASTM | B698 | ||
| For Air Conditioning and Refrigeration Field Servi | SAE | J461 | ||
| MILITARY | MIL-T-24107 | |||
| ASTM | B75/B75M | |||
| MILITARY | MIL-T-24107 | |||
| ASTM | B716 | |||
| ASTM | B395/B395M | |||
| ASTM | B640 | |||
| ASME | SB75 | |||
| ASTM | B280 | |||
| ASTM | B359/B359M | |||
| ASME | SB395 | |||
| SAE | J461 | |||
| ASME | SB359 | |||
| Bus Bar | ASTM | B188 | ||
| SAE | J461 | |||
| For Air Conditioning And Refrigeration Field Servi | SAE | J463 | ||
| MILITARY | MIL-T-3235 | |||
| Rectangular Waveguide | ASTM | B372 | ||
| ASTM | B641 | |||
| ASTM | B743 | |||
| ASTM | B641 | |||
| ASTM | B447 | |||
| SAE | J463 | |||
| Rectangular Waveguide | MILITARY | MIL-W-85 |
Copper C10200 Tubes Size Chart
| OD (inches) | Wall (inches) |
|---|---|
| 0.625 | 0.125 |
| 0.500 | 0.125 |
| 0.875 | 0.065 |
| 0.750 | 0.062 |
| 0.750 | 0.032 |
| 0.875 | 0.032 |
C10200 vs C10100
| Description | C10200 | C10100 |
|---|---|---|
| Copper | 99.95% Pure | 99.99% Pure |
| Certification | Certification is Not Required | Certified as Oxygen Free, |
| Cost | less expensive | more expensive |
| Category | Comes under Oxygen free category | Comes under Oxygen free electronic category |
| Conductivity | less electrical conductivity | better electrical conductivity |
| Strength | better mechanical properties | less mechanical properties |


C10200 Oxygen Free Copper Tube Physical Properties
| Melting Point – Solidus ⁰F | 1981 |
| Melting Point – Liquidus ⁰F | 1981 |
| Density lb/cu in. at 68⁰F | 0.323 |
| Electrical Conductivity % IACS at 68⁰F | 101 |
| Specific Gravity | 8.94 |
| Specific Heat Capacity Btu/lb/⁰F @ 68 ⁰F | 0.092 |
| Thermal Conductivity Btu/sq ft/ft hr/ ⁰F at 68⁰F | 226 |
| Coefficient of Thermal Expansion 10-6 per ⁰F (68-392 ⁰F) | 9.6 |
| Modulus of Rigidity ksi | 6400 |
| Coefficient of Thermal Expansion 10-6 per ⁰F (68-212 ⁰F) | 9.4 |
| Modulus of Elasticity in Tension ksi | 17000 |
| Coefficient of Thermal Expansion 10-6 per ⁰F (68-572 ⁰F) | 9.8 |
C10200 Equivalent
| Standards | Country | Value |
|---|---|---|
| EN | Europe | Cu-OF |
| DIN CEN/TS 13388 | Germany | CW008A |
| UNS | – | C10200 |
| JIS | Japan | C1020 |
| GB | China | TU1 |
| BS | England | C102 |
UNS C10200 Copper Alloy Seamless Tube Application
Glass-to-metal seals
Cavity resonators
Electrical and electronic conductors
Superconductor matrixes
Wave guides
Vacuum tube and solid-state devices
HVAC C10200 Air Conditioner Copper Pipe
OF C10200 Welded Tube Mechanical Properties
| Property/unit | Condition | Min | Max |
|---|---|---|---|
| Tensile Strength (N/mm2) | 1/2H | 290 | |
| Elongation in 5.65 Cross sectional area | O | 32 | |
| Tensile Strength (N/mm2) | H | 350 | |
| Tensile Strength (N/mm2) | O | 260 | |
| Elongation in 5.65Cross sectional area | 1/2H | 4 |
Thermal Properties Of C10200 OFHC Tubing
| Thermal Properties | Metric | English |
|---|---|---|
| Annealing Point | >= 371 °C | >= 700 °F |
| CTE, linear | 17.0 µm/m-°C @Temperature 20.0 – 100 °C |
9.44 µin/in-°F @Temperature 68.0 – 212 °F |
| 17.7 µm/m-°C @Temperature 20.0 – 300 °C |
9.83 µin/in-°F @Temperature 68.0 – 572 °F |
|
| 17.3 µm/m-°C @Temperature 20.0 – 200 °C |
9.61 µin/in-°F @Temperature 68.0 – 392 °F |
|
| Thermal Conductivity | 391 W/m-K @Temperature 20.0 °C |
2710 BTU-in/hr-ft²-°F @Temperature 68.0 °F |
| Melting Point | 1083 °C | 1981 °F |
| Specific Heat Capacity | 0.385 J/g-°C @Temperature 20.0 °C |
0.0920 BTU/lb-°F @Temperature 68.0 °F |
C102 Copper Tube Fabrication Properties
| ALLOY | JOINING TECHNIQUE | SUITABILITY LEVEL |
|---|---|---|
| C10200 | Gas Shielded Arc Welding | Good |
| Brazing | Excellent | |
| Soldering | Excellent | |
| Oxyacetylene Welding | Fair | |
| Spot Weld | Not Recommended | |
| Coated Metal Arc Welding | Not Recommended | |
| Butt Weld | Good | |
| Seam Weld | Not Recommended | |
| Capacity for Being Hot Formed | Excellent | |
| Capacity for Being Cold Worked | Excellent | |
| Machinability Rating | 20 | |
| Forgeability Rating | 65 |
about GNEE

why choose our products
Our company is equipped with advanced production lines capable of extruding, drawing, refining, and processing copper rods, copper tubes, copper busbars, and special-shaped copper products. To ensure every single product meets international standards, we have established a comprehensive quality control center. This center is furnished with a range of high-precision testing equipment, including spectrometers, metallurgical microscopes, universal material testing machines, and conductivity testers. This allows us to perform rigorous checks on raw materials, semi-finished, and finished products, covering chemical composition, physical properties, and non-destructive testing.
If you need any help, please contact us immediately:sales@gneesteel.com
Other product forms provided by GNEE
|
Material |
Brass:C21000,C22000,C22600,C23000,C24000,C26000,C26130,C26800,C27000,C27200,C27400, C2800,H59,H62,H70,H65,H80,H90,CuZn30,CuZn37,CuZn35,CuZn40,etcLeaded |
|
Diameter |
1/4",3/8",1/2", 5/8", 7/8" or customized |
|
Thickness |
0.5/0.6/0.7/0.8/1 or Customized |
|
Length |
15m/50ft or customized |
|
Standard |
JIS,AISI,ASTM,GB,DIN,EN |
|
Price Term |
x-Work,FOB,CNF,CFR,CIF,FCA,DDP,DDU,etc |
|
Payment Term |
TT,L/C,Western Union,D/P,etc |
|
Application |
refrigeration,installation of air conditioner,construction water and gas |
|
Package |
Standard export package,suit for all kinds of transport,or as required. |
|
Material |
Copper, Brass, Bronze and special copper alloy |
|
|
Grade |
ASTM |
C10100,C11000,C12200,C21000,C22000,C23000,C24000,C26000, |
|
G/B |
TU1,T2,TP2,H96,H90,H85,H80,H70,H65,H63,H62,H59,HPb63-3, |
|
|
JIS |
C 1011,C 1100,C 1220,C3604,C 2100,C 2200,C 2300,C 2400, C 2600, |
|
|
BS |
Cu-OFE,C 101,Cu-DHP,CZ 125,CZ 101,CZ 102,CZ 103,CZ 106,CZ 107, CZ 108,CZ 109,CZ 123,CZ 124, CZ 121,CZ 111,CZ 133, Pb 104, |
|
|
DIN/ISO |
CuZn5,CuZn10,CuZn15,CuZn20,CuZn30,CuZn35,CuZn33,CuZn36, |
|
|
Shape |
Round, Square, Flat, Hexagon, Oval, Half-round or Customized |
|
|
Dimension |
Bar/Rod |
Standard(Diameter 5-160 mm) or Customized |
|
Wire |
Standard(Diameter 0.02-6 mm) or Customized |
|
|
Plate/Sheet |
Standard(T 0.2-50 mm/W 200-3000 mm/L 6000 mm) or Customized |
|
|
Strip |
Standard(T 0.05-1.5 mm/W 20-600 mm/L 20000 mm) or Customized |
|
|
Tube/Pipe |
Standard(OD 3-360mm/Wall thickness 0.5-50 mm) or Customized |
|
|
Standard |
GB/T,JIS,ASTM, ISO, DIN, BS, NF etc. |
|
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard. |
|
|
Package |
Plastic film + Wooden case or as per customer requirement |
|
|
Surface |
Polished,bright,oiled,hair line,brush,mirror,or as required |
|
|
Deliver time |
According to order's quantity. |
|
|
Shipment |
By sea, by air, DHL, UPS, FedEx etc. or as required |
|
|
Application |
Electric light industry, machinery manufacturing, Building industry ,defense industry, and other fields Manufacturing industrial |
|
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Square,Rectangular,etc. |
||
|
Specifications |
Diameter:3~200mm |
||
|
Length |
3m,5.8m, 6m, 11.8m, 12m, or as required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Export to |
Singapore,Indonesia,Ukraine,Korea,Thailand, Vietnam, Saudi Arabia, Brazil, Spain, |
||
|
Application |
Copper plates are mainly used in electrical conductivity, heat conduction, and corrosion-resistant equipment. For instance, they are applied in wires, cables, conductive screws, blasting detonators, evaporators for chemical industries, storage containers, and various pipelines, etc. They can also be used as force-bearing parts for various deep drawing and bending manufacturing processes, such as pins, rivets, washers, nuts, conduits, pressure gauges, screens, and radiator parts, etc. |
||
|
Contact |
If any requirement please feel free to inform me at any time. |
||
|
Grade |
C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920, C10930,C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300, C12500,C14200,C14420,C14500,C14510,C14520,C14530,C17200,C19200, C21000,C23000,C26000,C27000,C27400,C28000,C33000,C33200,C37000, C44300,C44400,C44500,C60800,C63020,C65500,C68700,C70400,C70620, C71000,C71500,C71520,C71640,C72200,T1,T2,T3,etc |
|
Standard |
JIS ASTM DIN EN ISO |
|
Diameter |
0.3-5mm/custom |
|
Length |
custom |
|
Surface |
mill,polished,bright,mirror,hair line,brush,checkered,antique,sand blast,etc |
|
Application |
Building, industry etc |
|
Payment Terms |
T/T or L/C at sight |
|
Delivery time |
5-15 days after receiving L/C or deposit |
|
Remark |
Specific requirement of alloy grade,temper or specification can be discussed at your request |







