Gnee Steel (Tianjin) Co., Ltd.

History and Development of Copper: From Native Metal

Nov 22, 2023

Copper as the First Metal Worked

Copper is one of the earliest metals discovered by humans and the first that people learned to use. Because copper occurs in the metallic state in some deposits, it could be shaped by hammering before anyone understood how to smelt ore, and small cones, nails and ornaments made in this way represent the beginning of metalworking.

In China, the use of red copper hammered directly from natural copper is recorded from about four thousand years ago in the Xia period. Analysis of nearly twenty bronze artefacts unearthed at the Huangniangniang Terrace site in Wuwei, Gansu, in 1957 and 1959 showed copper contents as high as 99.63 % to 99.87 %, identifying them as essentially pure copper rather than alloyed bronze.

From Pure Copper to Deliberate Alloying

The step from native copper to intentional alloying marks the beginning of bronze metallurgy. Adding tin lowered the melting point and raised the hardness of the finished tool, and the change spread rapidly because it made better cutting edges possible with the furnaces of the period. Excavations at Yinxu near Anyang produced substantial evidence of the scale of that industry, including a malachite find reported at 18.8 kg and slag and cinder residues of about 21.8 kg, which shows that ore was being processed on site rather than traded only as finished objects.

The Chinese record also documents the emergence of bronze casting as a state-supported activity. Mastering the copper-tin system required control of furnace temperature, crucible practice and mould design, and those skills form the technical foundation on which later copper refining was built.

Smelting, Refining and Early Wet Extraction

Extraction technology advanced alongside alloying. In thirteenth-century Falun, Sweden, sulphide ore was roasted and then treated with water so that copper sulphate formed; when the solution was run across iron filings, metallic copper precipitated out, and the thin copper layer could be separated and collected. This cementation route was a major source of wealth for the district at the time.

The earliest method of extracting copper in China used natural copper compounds for wet copper smelting. The reaction in which an iron tool displaces copper from a copper sulphate solution, recorded in the Huainanzi Wanbishu, is not only the origin of hydrometallurgical practice but also a genuine invention in the history of chemistry. It relies on the same principle used today in solvent extraction and electrowinning circuits, where copper in solution is recovered onto cathodes.

Copper in Traditional Production

By the late Bronze Age, vertical furnace refining was already established in China, and the scale of output grew accordingly. Copper production reached about 7,300 tonnes in the first year of the Yuanfeng reign period of the Song dynasty, corresponding to the year 1078, which indicates that copper metallurgy had reached a considerable level of organisation and control.

That figure is instructive for a modern reader: it shows that copper has been a bulk industrial metal for a very long time, and that the demand drivers - coinage, vessels, tools and construction - resemble the drivers of modern consumption in structure if not in scale.

From Traditional Metal to Standard Grades

The modern industry replaced trade names and local practice with a designation system. EN 1412 provides the European designation framework that produces names such as Cu-ETP (CW004A) for electrolytic tough pitch copper and Cu-DHP (CW024A) for phosphorus-deoxidised copper, the grade also known as UNS C12200. Downstream product standards then fix the requirements: EN 1172 for copper sheet and strip used in building, EN 12449 for seamless round copper tubes for general purposes, EN 1057 for water and gas tube, and ASTM B152/B152M for sheet, strip, plate and rolled bar.

Cathode, the feedstock for all of these products, is itself standardised: EN 1978 defines the Cu-CATH-1 grade and ASTM B115 covers electrolytic copper cathode, so a smelter's output can be traded and melted without re-analysis disputes. The result is a supply chain in which a designer can specify conductivity, temper and dimension by standard number and receive material that behaves as expected, wherever it was produced.

Frequently Asked Questions

Q: Why did bronze replace pure copper?

A: Adding tin lowered the melting point and increased hardness, so bronze tools held a better edge, and the alloy was easier to cast in the furnaces available at the time.

Q: What was the earliest copper extraction technique?

A: Wet extraction, in which copper was precipitated from a copper sulphate solution by iron, was practised early and is recorded in Chinese texts; the same chemistry underlies modern hydrometallurgical recovery.

Q: How is copper specified today?

A: By designation and standard rather than by trade name, for example Cu-DHP to a product standard such as EN 12449 for tube or EN 1172 for building sheet.

Q: Is ancient copper the same material as modern commercial copper?

A: Chemically it is close, but modern grades are produced with controlled residual levels and certified by analysis, which is what allows conductivity and fabrication behaviour to be guaranteed.

goTop