Gnee Steel (Tianjin) Co., Ltd.

What are the characteristics and main application areas of tin bronze?

Jul 09, 2024

What are the characteristics and main application areas of tin bronze?

info-288-175info-301-167info-292-173

In addition to containing 3% to 14% tin, tin bronze often contains phosphorus, zinc, lead and other elements. It is the earliest alloy used by humans and has a history of about 4,000 years. It is corrosion-resistant and wear-resistant, has good mechanical properties and process properties, can be welded and brazed well, and does not produce sparks when impacted. It is divided into processed tin bronze and cast tin bronze. The tin content of tin bronze used for pressure processing is less than 6% to 7%, and the tin content of cast tin bronze is 10% to 14%. Common grades include QSn4-3, QSn4.4-2.5, QSn7-O.2, ZQSn10, ZQSn5-2-5, ZQSN6-6-3, etc. Tin bronze is a non-ferrous metal alloy with the smallest casting shrinkage rate. It can be used to produce castings with complex shapes, clear contours and low airtightness requirements. Tin bronze is very corrosion-resistant in the atmosphere, seawater, fresh water and steam, and is widely used in steam boilers and marine ship parts. Phosphorus-containing tin bronze has good mechanical properties and can be used as wear-resistant parts and elastic parts of high-precision machine tools. Lead-containing tin bronze is often used as wear-resistant parts and sliding bearings, and zinc-containing tin bronze can be used as high-airtightness castings.
Tin bronze has a large solidification range and severe dendrite segregation; it is not easy to form concentrated shrinkage cavities during solidification, and the volume shrinkage is very small; tin reverse segregation is easy to occur in the ingot, and in severe cases, white spots (8-phase precipitation) can be seen on the surface of the ingot, and even tin-rich particles, generally called tin sweat, can be seen. Improving the casting method and process conditions can reduce the degree of reverse segregation; in the liquid alloy, tin is easy to generate hard and brittle inclusions SnO2, and smelting must be fully deoxidized to prevent the reduction of the mechanical properties of the alloy caused by inclusions; it is very sensitive to overheating and gas, and can be well welded and brazed; no sparks occur during impact, it is non-magnetic, cold-resistant, and has extremely high wear resistance.

goTop