What is H62 brass?
This brass consists of a copper-zinc alloy with approximately 62% copper and 38% zinc. Due to this composition, the alloy offers a balanced merit of mechanical strength, corrosion resistance, and great malleability. The production of this brass occurs through casting, forging, and rolling processes for the preparation of applications in the industrial and commercial fields. Being versatile and durable, H62 brass is used for fabricating valves, pipes, and decorative fittings.
In-Depth Discussion on H62 Brass Chemical Composition
H62 brass is mainly a copper (Cu) and zinc (Zn) alloy along with some trace quantities of other elements depending on one property that should be enhanced. Standard H62 brass has a copper content that ranges from 60.5% to 63.5%, with the zinc content ranging from 36.5% to 39.5%. These values could fluctuate slightly depending on custom specifications or manufacturing standards. A copper-rich alloy gives H62 brass good corrosion resistance and high malleability, whereas the zinc content gives it strength and hardness.
Very small quantities of impurities or additional elements are also present, such as lead (Pb), iron (Fe), or sulfur (S), each below 0.5%, depending upon the process of production or environment in which the material is going to be used. For example, lead will be added to improve machining operations, whereas a low level of iron may enhance wear resistance.
This compromise in the composition makes H62 brass a highly versatile alloy, suitable for many applications, industrial or decorative. Its chemical nature ensures the strength and workability required by any reactive environment, and this is why it persists in modern production as the most commonly used brass.
Copper and Zinc in H62 Brass
The basic compositions of H62 brass are copper and zinc, which together create the particular qualities of the alloy. In general, about 60 to 63% of the alloy consists of copper, whereas the rest is made up of 37 to 40% zinc. This range is based on a fine balance chosen by the manufacturers between strength, malleability, and corrosion resistance, leaving H62 brass open to numerous applications.
The highest content of copper largely adds to the metals' thermal and electrical conductivity character and corrosion resistance in various environments, including moisture and some acids. It controls the ductility of the material, which allows shaping or machining into intricate components without cracking.
On the contrary, zinc offers strength and wear resistance. It makes the alloy hard enough to withstand mechanical strain, hence the manufacture of gears, bearings, and valves. Zinc serves to lessen the price of the alloy without seriously compromising its performance, thus contributing to its economic worth for industrial use.
The particular blend of copper and zinc in H62 brass yields a balance of mechanical and chemical properties, as well as machining and long lifetimes. By virtue of this perfect combination, H62 brass finds application in manufacturing automotive parts, electrical connectors, and decorative-related materials.

Inquire about H62 Brass Pricing & Samples
Manufacturing Process of Brass-Alloy Products in General H62
The typical production process of alloys like H62 involves melting and mixing precise proportions of copper and zinc. First, the raw materials are weighed and melted together in the furnace. Once the mixture is fully hot and molten, it is stirred to ensure uniformity in composition. After that, the alloy is cast into molds forming billets or ingots, which are then cooled and further processed. Rolling, shaping, or machining are the final requirements of the product and are carried out according to the end-application specifications. The whole process ensures that the quality and characteristics of H62 brass are retained.
Differences Between H59 and H62 Brass
| Key Parameter | H59 Brass | H62 Brass |
|---|---|---|
| Composition | 59% Copper | 62% Copper |
| Strength | Higher | Moderate |
| Hardness | Higher | Moderate |
| Malleability | Lower | Higher |
| Corrosion Res. | Lower | Higher |
| Wear Res. | Higher | Moderate |
| Applications | Load-Bear | Forming |
Our factory
Our modern production base is equipped with advanced full-process production lines dedicated to the manufacturing of copper and copper alloy products. The factory features precision smelting, continuous casting, high-pressure extrusion, high-speed rolling, and precision cutting equipment, ensuring strict control over every step from copper ingot to finished product. We possess strong R&D and customization capabilities, enabling us to produce various specifications and tempers of copper tubes, plates, rods, wires, and ultra-thin foils in accordance with international standards (such as ASTM, EN, JIS) and specific customer requirements. Our products are widely used in various industries, including refrigeration, electronics, power, transportation, and construction.

Copper product packaging
We fully understand that secure packaging is essential for the flawless delivery of products. Tailored to the characteristics of different products, we employ customized professional packaging solutions: copper tubes and rods are typically secured with anti-rust inner liners and sturdy wooden crates or iron-frame boxes to prevent impact and deformation during transit; copper plates, strips, and foils are first covered with protective film, placed in a dry environment, wrapped with waterproof paper and moisture-proof materials, and finally packed into reinforced plywood crates or steel coil boxes to effectively resist moisture and mechanical damage; wires are neatly wound onto wooden or steel reels and firmly strapped. All packaging is clearly labeled and compliant with export standards, ensuring that your goods maintain their excellent factory condition even after long-distance sea transportation and multiple handlings.

Get Fast Quote & Logistics Plan







