Why Copper Bars Need Tin Plating?

The range of cross-sectional dimensions for copper and copper alloy busbars is:

-2.24≤a≤50.00mm;

-16.00≤b ≤400.00mm.

From the above, it can be seen that it is not accurate to say that the copper busbars we use are made of pure copper. It should be precisely noted as T2 pure copper busbars. Pure copper can be divided into T1, T2, T3, T4, among which the copper and silver content of T2 is greater than or equal to 99.9%. Therefore, the copper busbars actually used are mainly T2. The copper busbars mentioned here are mainly conductive materials and do not include terminals. Although pure copper is one of the preferred conductive materials in the power system, different materials are used according to specific needs to achieve the best performance and economic efficiency in practical applications. For example, brass, despite its relatively high resistivity and unsuitability for main conductive parts, has better mechanical properties and corrosion resistance, making it suitable for manufacturing auxiliary parts such as screws, fasteners, or shells. Other examples include tellurium copper and tin-phosphor bronze, which are often used for specific mechanical properties in switches, sockets, connectors, etc., due to their wear resistance and elasticity.

Improving electrical conductivity

The tin-plated layer can keep the copper busbar surface clean, providing a smooth and uniform contact surface, thus reducing contact resistance. The alloying reaction between copper and tin makes the conductivity of tin-plated copper more stable, resulting in higher current-carrying capacity compared to traditional pure copper wires.

Preventing oxidation

In humid or oxygenated environments, copper easily oxidizes to form a layer of poor conductivity called patina. This not only affects the conductivity of copper but also increases contact resistance, leading to higher temperature rise. The tin-plated layer can effectively block oxygen and water vapor, preventing the oxidation of the copper busbar and maintaining its good electrical conductivity.

Enhancing heat dissipation

The thermal emissivity of tin and tin oxide differs. Theoretical maximum emissivity of an absolute black body is 1, but the emissivity of polished pure copper is only 0.15. Tin-plating the surface of the copper busbar helps in heat radiation dissipation, which is crucial for safe operation in applications with high current density.

Improving corrosion resistance

Copper is a metal that easily oxidizes and forms patina in the air, which leads to decreased electrical conductivity and structural strength. Tin-plating the surface of the copper busbar can effectively prevent reaction and corrosion caused by the external environment, significantly enhancing its corrosion resistance and prolonging its service life, especially in humid, salty, or chemically corrosive environments.

Enhancing solderability

Tin is an excellent soldering material. Tinned copper bars are easier to solder with other metal components, even without flux, improving production efficiency and soldering quality.

 

 

why choose our products

We are a leading manufacturer and exporter specializing in a comprehensive range of high-quality copper products, including copper tubes, copper plates/sheets, copper bars, copper rods, copper wires, and copper strips. Our advanced manufacturing facilities are equipped with state-of-the-art continuous casting lines, extrusion presses, cold rolling mills, and drawing machines to ensure precision and consistency. Rigorous quality control is integral to our process, conducted through spectrometers for material verification, tensile testers, eddy current testers, and hydrostatic pressure testers, guaranteeing that all our products meet international standards for performance and durability.

E-mail: sales@gneesteel.com

 

35000+

Square Meters Built

 

200+

Enterprise Employees

 

8000+

Cooperating Partner

 

18+

Years Experience