Today, let's discuss the use of copper in transportation! The transportation sector is actually quite simple and can be divided into four areas: ships, automobiles, railways, and aircraft.
1. Shipbuilding
Let's first discuss ships. Copper is widely used in shipbuilding, especially copper alloys that are highly resistant to seawater corrosion.
Due to their excellent seawater corrosion resistance, materials such as aluminum bronze, manganese bronze, aluminum brass, gunmetal (tin-zinc bronze), white copper, and nickel-copper alloys (monel) have become standard materials for shipbuilding. Generally, copper and copper alloys account for 2-3% of the weight of warships and merchant ships.
The propellers of warships and most large merchant ships are made of aluminum bronze or brass. Each propeller on a large ship weighs 20-25 tons.
The propellers on the aircraft carriers HMS Queen Elizabeth and HMS Queen Mary each weigh 35 tons. "Admiral" gunmetal is often used for the heavy tail shafts of large ships, as are the rudders and propeller tapers. Copper and copper alloys are also used extensively in engine and boiler rooms. The world's first nuclear-powered merchant ship used 30-ton cupronickel condensers. Recently, aluminum brass tubes have been used for large heating coils in oil tanks.
A 100,000-ton ship might have 12 such tanks, requiring a considerable heating system. Shipboard electrical equipment is also complex, with engines, electric motors, and communication systems relying almost entirely on copper and copper alloys.
The cabins of ships of all sizes are often decorated with copper and copper alloys. Even wooden boats are best secured with screws and nails made of copper alloy (usually silicon bronze), which can be mass-produced by rolling.
To prevent marine life from fouling the hull, which could affect navigation, copper coating was often used in the past; now, copper-containing paint is the common solution.
During World War II, anti-magnetic mine devices were developed to protect ships from German magnetic mines. A copper band was attached around the steel hull, and an electric current was passed through it to neutralize the ship's magnetic field, preventing the mine from detonating.




II. Automotive Industry
Each car uses 10 to 21 kilograms of copper, varying depending on the type and size of the vehicle. For a sedan, it accounts for approximately 6 to 9% of its weight.
Copper and copper alloys are primarily used in radiators, brake system piping, hydraulic systems, gears, bearings, brake pads, power distribution and electrical systems, gaskets, and various joints, fittings, and accessories. Radiators consume the most copper. Modern tube-and-ribbon radiators use brass ribbon welded together to form the tubes, and thin copper ribbon bent together to form the fins.
In recent years, numerous improvements have been made to further enhance the performance of copper radiators and strengthen their competitiveness against aluminum radiators. In terms of material quality, trace elements are added to copper to increase its strength and softening point without sacrificing thermal conductivity, thereby reducing the thickness of the strip and saving steel. In terms of manufacturing technology, high-frequency or laser welding of copper tubes is used, and copper solder is used to assemble the radiator core, replacing lead-prone solder. Compared to brazed aluminum radiators, under the same heat dissipation conditions-that is, the same air and coolant pressure drop-the new copper radiator is lighter and significantly smaller. Coupled with steel's excellent corrosion resistance and long service life, the advantages of copper radiators are even more pronounced.
With the energy transition, new energy vehicles are placing greater demand on copper! Power batteries require copper foil. Pure electric vehicles use 25.3-38.0 kg of lithium-ion copper foil per vehicle, while plug-in hybrid vehicles use 6.2-9.3 kg.
On the other hand, the electromagnetic coils in electric motors are made from copper rods. Each pure electric vehicle and plug-in hybrid vehicle uses 12.3 kg and 8.9 kg of copper per motor, respectively. Furthermore, electric vehicles also use copper in their high-voltage and low-voltage wiring harnesses. The low-voltage wiring harness in electric vehicles uses 5 kg more copper per vehicle than in gasoline-powered vehicles, while the high-voltage wiring harness requires high electrical conductivity.
III. Railway Sector
Railway electrification requires significant quantities of copper and copper alloys. Over 2 tons of special-shaped copper wire is required for each kilometer of overhead conductors. To enhance its strength, small amounts of copper (approximately 1%) or silver are often added. Furthermore, train motors, rectifiers, and control, braking, electrical, and signaling systems all rely on copper and copper alloys.
During the track manufacturing process, appropriate amounts of copper and other materials are added to increase the track's toughness and strength, enabling it to withstand the weight of the train and the impact forces during operation.
IV. Aircraft Industry
Aircraft navigation also relies on copper. For example, copper is used in aircraft wiring, hydraulic, cooling, and pneumatic systems; aluminum-bronze tubing is used for bearing retainers and landing gear bearings; antimagnetic steel alloys are used for navigation instruments; and copper-copper elastic elements are used in many instruments.
Copper alloys may be used in some aircraft engine components, such as turbine blade cooling ducts and combustion chamber liners. Furthermore, copper radiators or heat exchangers in aircraft thermal management systems effectively dissipate heat generated by the engine, ensuring the proper operation of the aircraft.
The company has a cluster of leading copper processing production lines in China, including:
German imported precision copper tube production line (annual output of 30,000 tons)
Japanese technology copper foil rolling line (thinnest up to 6μm)
Fully automatic copper bar continuous extrusion line
Intelligent copper sheet and strip finishing mill unit
Digitalized control and management of the whole production process is realized through MES system, and the dimensional accuracy of the products can reach ±0.01mm.








