Different types of application fields of copper pipe joints
There are six main types of copper pipe joints: welded copper pipe joints, ferrule copper pipe joints, expanded copper pipe joints, insertion welded copper pipe joints, cone seal welded copper pipe joints, and crimped adhesive copper pipe joints . Below, manufacturers of copper pipe quick connectors, copper water pipes and copper water pipes will talk about different types of application fields of copper pipe joints.
Different types of copper pipe joints are used in different fields. First, there are two-way copper pipe joints. The expanded copper pipe joint is an application of this two-way joint. The main material of this kind of joint is brass. The product The pressure resistance is NP-1.6Mpa. This product is suitable for joint pipes with corrosive or non-corrosive media such as water, oil, and gas. It is more flexible to use steel pipes without too many requirements. After connection, it has It has the characteristics of reliable connection and good sealing, so it is widely used.
Another widely used joint is the stainless steel ferrule joint, which is about 1 minute long and can be connected to a 6mm copper pipe. There is no need to expand the mouth. It needs to be tightened when using it. If it cannot be tightened, a wrench is needed. After tightening, the small pipe clamp will On the copper pipe. This product is easy to use, simple to operate and widely used.
In addition to the two-way copper pipe joints, the three-way joints are also indispensable in life. The material of the tee joint is brass, and the sizes of the joints are: 6mm, 8mm, 9.25mm, 10mm, etc. And this product has the characteristics of high temperature resistance. Suitable for moistening and rust removal, air humidification, chemical treatment, chemical spraying, liquid spraying, etc.
There are also curved connectors. U elbow is a kind of curved joint. The material is red copper TP2, with a copper content of up to 99.9%.
