How much do you know about lithium battery copper foil? It turns out that lithium battery copper foil is processed from it...

Copper foil serves as the carrier of the negative active material and the negative current collector in the lithium battery structure. A typical lithium-ion battery structure mainly includes four parts: positive electrode, negative electrode, electrolyte and separator. When a lithium battery is charged, the potential applied to both poles of the battery forces the lithium-embedded compound of the positive electrode to release lithium ions, which pass through the separator and are embedded in the graphite negative electrode with a lamellar structure; during discharge, the lithium ions are precipitated from the graphite lamellar structure and recombined. The lithium-embedded compound of the positive electrode combines, lithium ions move, and current is generated.
Due to its good conductivity, flexibility, moderate potential, resistance to winding and rolling, and mature manufacturing technology, copper foil acts as a carrier for negative active materials such as graphite, and at the same time serves as a negative current collector to produce active materials in the battery. currents are combined to produce a larger output current.
The quality and cost of lithium battery copper foil account for about 13% and 8% of the total mass and total cost of a typical lithium battery respectively. It is one of the key materials in lithium batteries. So how is such a critical material processed?
There are two main methods for manufacturing copper foil: electrolysis and rolling. Electrolytic copper foil mainly uses copper sulfate solution as the electrolyte, while rolled copper foil mainly uses brass, copper and other alloys as raw materials and is produced through a rolling process.
Copper foil production process flow:
① Prepare raw materials: Copper materials are made into copper rods and strips through heating, rolling, drawing and other processes.
②Surface cleaning: Remove iron, aluminum, nickel and other residues on the surface of the copper rod strip.
③Rolling: Roll the prepared copper bar strip through a rolling mill and press it into a copper strip of a certain thickness.
④ Passivation: Passivate the surface of the copper strip to make it difficult to oxidize.
⑤Electrolytic corrosion: Process the copper strip into certain specifications through electrolytic corrosion.
copper foil.
⑥Surface treatment: After surface treatment such as anti-oxidation treatment, the quality and technical indicators of the copper foil meet customer requirements.
⑦Slitting process: According to the customer's requirements for copper foil quality, width, weight, etc., high-precision slitting equipment is used for slitting, classification, inspection, and packaging.






