Titanium alloy in the weapons industry has been widely used, become an indispensable material, weapons with titanium, such as a tiger to add wings, show more power. Titanium alloy weapons are not only light in quality, good mobility, and rising power, especially suitable for airborne troops and assault troops, titanium mortar seat plate is more than 50% lighter than steel plate, titanium alloy is the manufacture of mortar tubes, seat plate, gun barrels, gun racks, etc., superior materials, but also the preparation of protective clothing and helmets, a good material.
1955 U.S. Arms Industry with titanium 57 tons in 1961 281 tons in 1971, 1971 and 1971, 281 tons of titanium, titanium alloys in the field of weapons application of the largest and most advanced units. In 1961, 281 tons, in 1971, 1040 tons, it is estimated that in 2020 has reached 2100 tons, because it is not a time of war, so the growth rate is not fast.
Application in artillery
Titanium and titanium alloys are important materials for the manufacture of structural parts for artillery, and have been used in some world-famous artillery pieces since the 1950s. The United States in 1950 manufactured M28 120mm Crockett (Crockett) recoilless gun barrel, chamber, nozzle and firing piston is used Ti-6Al-6V-2Sn-0.5Fe-0.5Cu alloy forging and extrusion and become, the whole quality of the gun 68kg, 104.4kg lighter than the steel gun 34.9%, split after 5 people can easily carry away, the mass production began in 1961, the mass production of titanium alloy, titanium alloy, titanium alloy, titanium alloy, titanium alloy, titanium alloy, titanium alloy, titanium alloy, titanium alloy, titanium alloy, titanium alloy, titanium alloy and titanium alloy. In 1961, began mass production, equipped with infantry battalions, paratrooper battalions, mechanized infantry battalions, tank battalions and airborne divisions, with a small size, light weight, high power, high mobility and easy to camouflage and so on. ti-6Al-6V-2Sn-0.5Fe-0.5Cu is a (α + β) type alloy, annealed mechanical properties: tensile strength 1098MPa, yield strength 1030MPa, elongation 13%, section shrinkage 37%, Brinell hardness 34.



In the 1970s, switched to Ti-6Al-4V-2Sn titanium alloy manufacturing barrel, with Ti-6Al-4V, Ti-7Al-4Mo and Ti-5Al-1.5Fe-1.4Cr-1.2Mo titanium alloy manufacturing chamber, nozzle and firing piston, the whole gun quality is only 49kg, 4 people can run forward with resistance. T66-type 76mm gun tailstock, the gun rack changed to titanium alloy. T66 type 76mm gun tailstock, gun rack changed to titanium alloy, lighter than steel 93.55kg, only 142.9kg. field gun titanium alloy frame, 42% lighter than steel. Later, the United States with industrial pure titanium manufacturing T227 81mm mortar seat plate, 50% lighter than the steel plate, only 10.9kg. the gun plug is also titanium alloy, used to connect the barrel and seat plate, in the land surface and gravel ground for hundreds of rounds of test fires, have achieved good results. t227 type 81mm mortar after the change to the titanium seat plate, the quality of the mass dropped to 34kg, the range rose to 4500m, while the steel mortar seat plate is made of titanium. After the T227 81mm mortar changed to titanium seat plate, the mass decreased to 34kg and the range increased to 4500m, while the mass of steel gun was 42.25kg and the range was 3600m, which not only reduced the mass by 20% and increased the range, but also greatly improved the mobility.
Japan's 155mm pursuit gun seat plate changed to Kobe Steel's titanium alloy, the quality of the drop of about 50%, the use of 5mm and 8mm Ti-6Al-4V alloy plate welded, the test showed that the welding quality is good, can fully meet the operational needs. Japan uses the TA7 alloy whole stamping 100mm mortar seat plate than steel light 10kg, 1981 design finalization, 1983 production and installation. 1984 installation of 82mm mortar body, base and bracket changed to titanium alloy, lighter than steel 16.6kg.
On January 31, 2007, the U.S. Army Times stated that the new 155mm M777 howitzer, the first ground combat system to use titanium alloy, was approximately 3,150kg lighter than the obsolete M198 gun, a drop in mass of nearly 50 percent. The drop in mass of the artillery system has not affected its range or accuracy, but mobility has been greatly improved.
Equipment such as helmets and body armor
1959-1961 the United States with Ti-6Al-4V, Ti-5Al-2.5Sn titanium alloy spinning M-1-type standard helmets unsuccessful, and later changed to Ti-4Al-3Mn titanium alloy and explosion molding process has been successful, the quality of only 0.794kg-1.02kg, in terms of ballistic effect, titanium helmets and helmets, but titanium helmets lighter than the standard steel helmets 0.45kg.
The United States uses 25.4mm thick plates made of 10 layers of nylon and 1 layer of Ti-5Al-2.5Sn titanium alloy sheet to manufacture bullet-proof undershirts, which have a mass of only 3.86kg, and can protect against artillery shells, grenades, and landmine fragments, but cannot protect against 7.62mm gun bullets.
China since the 1970s began to study the application of titanium alloy in the manufacture of weapons, with remarkable results. With TC9 titanium alloy manufacturing anti-tank missile rudder and rack body, it is a Ti-0.2Pd alpha alloy, in the annealed state application; with TC4 titanium alloy manufacturing 85-type anti-aircraft machine gun retractor achieved very good results, and later, with precision casting ZTC4 alloy to replace the TC4 alloy extruded bar achieved better results, the material utilization rate from 18% to 94%, but also saves a lot of Cutting and machining costs, two birds with one stone.TC4 is a commonly used excellent performance Ti-6Al-4V alloy, α + β type, in the annealed state application. Titanium lightweight flamethrower range of up to 70m, is a kind of light weapons at close range, lighter than steel more than 3kg, can be used in industrial pure titanium, Ti-3Al-2.5V and other alloys prepared.







