I. The effect of titanium on the microstructure and heat treatment of steel
Titanium and nitrogen, oxygen, carbon and other elements have a strong affinity, is an excellent deoxidizing and degassing agent and fixation of nitrogen and carbon effective elements. In steel, titanium and carbon to form a compound (TiC) bonding force is extremely strong, high stability, only at high temperatures (more than 1000 ℃) will slowly dissolve into the iron solid solution. These TiC particles can prevent the growth of steel grain coarsening, the microstructure of steel has an important impact. In addition, titanium is one of the strong ferrite-forming elements, which will narrow the austenite phase region. Titanium in solid solution can improve the hardenability of steel, while the presence of TiC particles will reduce the hardenability of steel. When the titanium content reaches a certain value, precipitation hardening occurs due to diffuse precipitation of TiFe2.
Second, the influence of titanium on the mechanical properties of steel
The effect of titanium on the mechanical properties of steel depends on the existence of its form, titanium and carbon content ratio and heat treatment methods. When titanium exists in solid solution in ferrite, its strengthening effect is higher than aluminum, manganese, nickel, molybdenum and other elements, second only to beryllium, phosphorus, copper, silicon and other elements. In the range of 0.03% to .1% mass fraction of titanium, titanium can increase the yield strength of steel. However, when the ratio of titanium to carbon exceeds 4, the strength and toughness of steel decreases dramatically. In addition, titanium improves the endurance strength and creep resistance of steel, and has an improved effect on the toughness of steel, especially the low-temperature impact toughness.



Third, titanium on the physical, chemical and process properties of steel influence
Titanium can improve the stability of steel in high temperature, high pressure, hydrogen environment, enhance the corrosion resistance of stainless acid-resistant steel, especially for intergranular corrosion resistance. In low carbon steel, when the ratio of titanium to carbon content reaches 4.5 or more, the steel has excellent resistance to stress corrosion and alkali embrittlement. In addition, titanium improves the oxidation resistance of steel at high temperatures and promotes the formation of a nitride layer, which results in a more rapid acquisition of the desired surface hardness. Titanium-containing steels are known as "fast nitriding steels" and can be used to manufacture high-precision screws. At the same time, titanium also improves the weldability of low carbon manganese steel and high alloy stainless sodium.
Fourth, the application of titanium in steel
Titanium is widely used in steel, when its mass fraction of more than 0.025%, can be considered as an alloying element. In ordinary low alloy steel, alloy structural steel, alloy tool steel, high-speed tool steel, stainless acid steel, heat-resistant steel, permanent magnet alloys and cast steel, titanium has a wide range of applications. In addition, titanium has become an important part of various advanced materials and an important strategic material. In the aerospace industry, the use of titanium accounts for more than half of the total, and is widely used in aviation spacecraft, power machinery and other fields.







