What are the main types of copper pipe joints?
Below, manufacturers of copper pipe quick connectors, copper water pipes and copper water pipes will talk about what are the main types of copper pipe joints?
There are six main types of copper pipe joints: welded copper pipe joints, ferrule copper pipe joints, expanded copper pipe joints, insertion welded copper pipe joints, cone seal welded copper pipe joints, and crimped adhesive copper pipe joints .
Two-way copper pipe joint, among which the expanded copper pipe joint is an application of this two-way joint. The main material of this kind of joint is brass, and the product pressure resistance is NP-1.6Mpa. This product is suitable for use by For joint pipes with corrosive or non-corrosive media such as water, oil, and gas, steel pipes are more flexible and do not have many requirements. After connection, they have the characteristics of reliable connection and good sealing. Therefore, they are widely used. Another widely used joint is the stainless steel ferrule joint, which is about 1 minute long and can be connected to a 6mm copper pipe. There is no need to expand the mouth. It needs to be tightened when using it. If it cannot be tightened, a wrench is needed. After tightening, the small pipe clamp will On the copper pipe. This product is easy to use, simple to operate and widely used.
The material of the tee joint is brass, and the sizes of the joints are: 6mm, 8mm, 9.25mm, 10mm, etc. And this product has the characteristics of high temperature resistance. Suitable for moistening and rust removal, air humidification, chemical treatment, chemical spraying, liquid spraying, etc.
Curved joint: U elbow is a kind of curved joint. The material is red copper TP2, with a copper content of up to 99.9%. The applicable scope is: air conditioning and refrigeration, plumbing hardware, hot and cold water supply, air energy water heaters, engineering machinery, refrigeration Equipment etc. There are also various curved two-way joints such as 45-degree bend, P-shaped bend, right-angle bend, etc., as well as curved three-way joints such as T-shaped copper tee, Y-shaped copper tee, and pants-shaped copper tee.
Different types of products have different types, so when you buy a product, first determine what type of copper pipe joint you need, and then decide the product you need based on the different types. At the same time, you should pay attention to the quality of different products.
![]()






