Gnee Steel (Tianjin) Co., Ltd.

Basic Knowledge of Metal Materials: Ferrous, Non-Ferrous and Special Metals

Mar 27, 2024

What Counts as a Metallic Material

Metallic materials are metallic elements, or materials with metallic properties, that consist mainly of metallic elements. The group covers pure metals, alloys, intermetallic compounds and special metal materials. Metal oxides such as aluminium oxide are not metallic materials, because their behaviour is ceramic rather than metallic.

Ferrous Metals: The Iron-Based Family

Material Composition
Industrial pure iron Fe about 99 % or higher
Cast iron Carbon 2 to 4 %
Carbon steel Carbon below 2 %

Ferrous metals, also called steel materials, extend well beyond these three base groups. The family also includes structural steel, stainless steel, heat-resistant steel, high-temperature alloys and precision alloys. In the broader definition, chromium, manganese and their alloys are counted as ferrous metals as well, which is why the boundary between ferrous and non-ferrous follows the iron group rather than iron alone.

Non-Ferrous Metals and Their Sub-Groups

Non-ferrous metals are all metals and alloys other than iron, chromium and manganese. They are divided into light metals, heavy metals, precious metals, semi-metals, rare metals and rare-earth metals. Non-ferrous alloys generally show higher strength and hardness than the pure metals they are based on, together with higher electrical resistance and a smaller temperature coefficient, which is exactly what makes copper, aluminium and nickel alloys useful in electrical and thermal engineering.

Light metals, valued for low density in transport and aerospace structures

Heavy metals, including copper, lead and zinc

Precious metals, used for contacts, catalysts and corrosion-critical parts

Semi-metals, with properties between metals and non-metals

Rare metals and rare-earth metals, used in functional and high-temperature applications

Special Metal Materials

Special metal materials split into structural and functional families. The structural side covers amorphous or rapid-condensation materials, quasicrystalline materials, microcrystalline materials and nanocrystalline materials. The functional side covers alloys such as stealth, hydrogen-resistant, superconducting, shape-memory, wear-resistant and vibration-damping alloys, together with metal-matrix composites. These materials are selected for a specific physical or chemical function rather than for load carrying alone.

Process Performance and Service Performance

Performance is divided into process performance and service performance. Process performance describes how a material behaves under specified cold and hot working conditions: casting performance, weldability, forgeability, heat-treatment performance and cutting processability. Service performance covers mechanical, physical and chemical properties under the conditions of use, and it is the basis on which a finished part is accepted or rejected.

Mechanical Properties Used in Design

Strength, the ability to resist load without permanent deformation or fracture

Plasticity, the ability to deform permanently without cracking

Hardness, resistance to local indentation and wear

Impact toughness, energy absorbed under sudden loading

Multiple-impact resistance, behaviour under repeated blows

Fatigue limit, the stress level a part can endure over many cycles

These six values are the main basis for part design and material selection. They are normally established by tensile, hardness and impact testing on each heat of material, and they should always be quoted together with the temper or heat-treatment condition, because the same alloy can differ widely from one condition to the next.

Frequently Asked Questions

Q: Are metal oxides metallic materials?
No. Metal oxides such as aluminium oxide are not metallic materials, because their properties are ceramic rather than metallic.

Q: What separates cast iron from carbon steel?
Carbon content. Cast iron carries about 2 to 4 % carbon, while carbon steel stays below 2 % and industrial pure iron is about 99 % iron or higher.

Q: Why are chromium and manganese grouped with ferrous metals?
In the broader definition, ferrous metals include chromium, manganese and their alloys alongside the iron-based grades.

Q: Do non-ferrous alloys behave differently from pure metals?
Yes. Non-ferrous alloys generally have higher strength and hardness, higher electrical resistance and a smaller temperature coefficient than the pure metals they are based on.

Q: What is the practical difference between process and service performance?
Process performance describes behaviour during casting, welding, forging, heat treatment and cutting. Service performance describes the mechanical, physical and chemical properties the part shows in use.

Q: Which properties matter most when selecting a material?
Strength, plasticity, hardness, impact toughness, multiple-impact resistance and fatigue limit are the main mechanical basis for design, supported by the physical and chemical properties the service environment demands.

goTop