Fundamental Properties & Metallurgical Comparison
| Property Category | C10100 (OFHC) | C10200 (OFE) | Technical Significance |
|---|---|---|---|
| Metallurgical Designation | Oxygen-Free High Conductivity Copper | Oxygen-Free Electronic Copper | Both are deoxidized with minimal residual deoxidants |
| Crystal Structure | Face-Centered Cubic (FCC) α-phase | Face-Centered Cubic (FCC) α-phase | Identical lattice structure |
| Grain Boundary Characteristics | Exceptionally clean boundaries | Clean boundaries | C10100 has marginally fewer impurities at grain boundaries |
| Dislocation Mobility | Highest possible in copper alloys | Very high | C10100 offers slightly better formability in extreme cold working |
| Recrystallization Temperature | 180-220°C | 180-220°C | Identical annealing characteristics |
Advanced Physical Properties Comparison
| Physical Property | C10100 (OFHC) | C10200 (OFE) | Measurement Conditions |
|---|---|---|---|
| Density at 20°C | 8.94 g/cm³ (±0.001) | 8.94 g/cm³ (±0.002) | ASTM B193 |
| Thermal Diffusivity | 116 mm²/s | 115 mm²/s | 20°C |
| Electrical Resistivity at 0°C | 1.56 µΩ·cm | 1.57 µΩ·cm | Cryogenic reference point |
| Residual Resistivity Ratio (RRR) | 150-300 | 100-200 | Ratio of ρ(273K)/ρ(4.2K) |
| Magnetic Susceptibility | -0.086×10⁻⁶ | -0.086×10⁻⁶ | Diamagnetic, identical |
| Surface Energy | ~1.65 J/m² | ~1.65 J/m² | Affects wetting and bonding |
Manufacturing & Processing Parameters
| Processing Aspect | C10100 (OFHC) | C10200 (OFE) | Industrial Implications |
|---|---|---|---|
| Extrusion Temperature Range | 750-850°C | 750-850°C | Similar hot working windows |
| Cold Work Reduction Limit | Up to 95% without annealing | Up to 90% without annealing | C10100 tolerates slightly more severe deformation |
| Surface Finish Capability | Ra < 0.2 µm achievable | Ra < 0.3 µm achievable | C10100 can achieve slightly finer finishes |
| Bright Annealing Atmosphere | Hydrogen or Vacuum required | Hydrogen or Vacuum required | Same processing requirements |
| Brazing Compatibility | All standard copper brazing alloys | All standard copper brazing alloys | No practical difference |
| Electroplating Adhesion | Excellent (≥20 MPa) | Excellent (≥18 MPa) | Both provide superior plating substrates |
Performance Under Extreme Conditions
| Extreme Condition | C10100 (OFHC) Performance | C10200 (OFE) Performance | Performance Notes |
|---|---|---|---|
| Cryogenic (4K) | Exceptional; RRR >200 typical | Very Good; RRR >100 typical | C10100 preferred for superconducting applications |
| High Temperature (400°C) | Oxidation rate: 0.05 mg/cm²/hr | Oxidation rate: 0.06 mg/cm²/hr | Negligible difference in oxidizing atmospheres |
| Radiation Environment | More stable electrical properties | Stable electrical properties | C10100 shows less property degradation under irradiation |
| Thermal Cycling (1000 cycles) | No microcracking observed | No microcracking observed | Both excellent for thermal cycling applications |
| Hydrogen Exposure (300°C) | Zero embrittlement | Zero embrittlement | Both immune to hydrogen disease |
Quality Assurance & Testing Standards
| Quality Parameter | C10100 (OFHC) Requirements | C10200 (OFE) Requirements | Testing Standard |
|---|---|---|---|
| Hydrogen Embrittlement Test | Mandatory (850°C/20 min in H₂) | Mandatory (850°C/20 min in H₂) | ASTM B577 |
| Grain Size Control | ASTM 4-8, tightly controlled | ASTM 4-8 | ASTM E112 |
| Non-Destructive Testing | 100% ultrasonic inspection typical | Spot ultrasonic inspection | ASTM E317 |
| Chemical Analysis Depth | Full quantitative spectrometry | Quantitative spectrometry | ASTM E53, E62 |
| Certification Requirements | Mill cert + often independent lab verification | Standard mill certification | Industry practice |
About us
Founded in 2008, our company specializes in the international trade of high-quality copper products. We are dedicated to providing a comprehensive range of copper-based solutions to a global clientele.
Our core product portfolio encompasses a diverse spectrum of copper and copper alloy forms, including:
Copper Tubes & Pipes: Precision-engineered for applications in HVACR, plumbing, and industrial systems.
Copper Sheets & Plates: Available in various grades and thicknesses for roofing, fabrication, and architectural uses.
Copper Bars & Rods: Supplied as solid profiles, hexagons, or squares for machining, electrical components, and manufacturing.
Copper Wires & Strands: From fine enamelled wires to large conductive cables for electrical and winding applications.
Copper Foils & Strips: Thin-rolled products essential for electronics, transformers, RF shielding, and flexible circuits.
We also offer related products such as Copper Coils, Copper Profiles, Copper Blanks, Copper Busbars, Copper Fittings, Copper Alloys (including brass and bronze), Copper Anodes, and Copper Cathodes.
Email:sales@gneesteel.com








