What is a C11000 copper pipe?
C11000 copper foils strips for transformers winding is made from red copper with purity of 99.95% and above, produced by cold rolling technology.
The thickness can be from 0.01mm to 3.0mm and the width is from 5mm to 1200mm.
C11000 has a minimum conductivity of 99.80% IACS (International Annealed Copper Standard) and can be supplied in a wide variety of tempers.
C11000 copper foil for transformer winding has advantages of good electrical conductivity, low resistance loss, superior surface quality etc., it is widely used as winding wire in electronic transformer, reactor and high frequency transformer.
Quick Details of C11000 Copper Foils Strips For Transformers Winding
| Product Name | C11000 Copper Foils Strips For Transformers Winding |
| Grades | C1100/C11000 Red Copper |
| Temper | O |
| Thickness | 0.01mm-3.0mm |
| Width | Width:5mm-1200mm |
| Edge | Slit/Round |
| Quantity Tolerance | ±10% |
| Paper Core Internal Diameter |
Ø 150mm,Ø300mm, Ø400mm, Ø500mm paper core, special internal diameter core and without paper core on special request |
| Surface Finish | The strip has a smooth surface, free from scratches and impurities |
| Cu (Min) | 99.90% |
| Electrical Conductivity (20℃)(IACS) |
≥99.80% |
| Applications | Transformer winding |
| Packaging | Wooden Pallet/Wooden Case |
| Payment Terms | 30% TT deposit and 70% balance before shipment, 100% LC at sight |
| Delivery Time | 7-10 working days |
| MOQ | 500Kgs |
| Sample | The sample of copper foil strip is available |
| Remark | C1100/C11000 copper foil strip can be customized |


Technical Specifications
| Technical Specifications | |
| Product Name | Copper Foil Strip C11000 O Temper |
| Thickness 0.01mm – 3.00 mm | |
| Width 5 – 1200 mm | |
| t<0.01 and t>3.00 on special request | |
| Thickness Core Tube | = minimun 15 mm |
| = maximun 20 mm | |
| Edge Deburring Range | Thickness ≤0.20 mm;Burr≤0.03mm |
| Thickness >0.20mm ;Burr≤0.05mm | |
| Staggered floor | Thickness ≤0.20 mm; Staggered floor≤0.5mm |
| Thickness >0.20mm ; Staggered floor≤2mm | |
| Turriform | Thickness ≤0.20 mm; Turriform≤4mm |
| Thickness >0.20mm ; Turriform≤5mm | |
| Protection | Possibility for paper-interleaving and paper core. |
| Thickness 0.01 – 3.0 mm | |
| Width 5– 1200 mm | |
Chemical Composition of C11000 Copper Foils Strips For Transformers Winding
| C1100/C11000 Copper Foils Strips Chemical Composition(%) | ||||||||
| Element | Cu+Ag | Sn | Zn | Pb | Ni | Fe | As | O |
| Standard Value | ≥99.90 | ≤0.002 | ≤0.005 | ≤0.005 | ≤0.005 | ≤0.005 | ≤0.002 | ≤0.06 |
Mechanical Properties of C11000 Copper Foils Strips For Transformers Winding
| Property | Units | Temper |
| Annealed* (O soft) | ||
| Tensile Strength (min) | MPa | 210* |
| Elongation (min) | % | 40* |
| Hardness | HV | 55 max* |
Equivalent Alloy Specifications Of C11000 Copper Foils Strips For Transformers Winding
|
Chinese Grade |
Abroad Similar Brand |
||||
|
INTERNATIONAL |
USA |
JAPAN |
UK |
GERMANY |
|
|
(ISO) |
(ASTM) |
(JIS) |
(BS) |
(DIN) |
|
|
T2 |
Cu-ETP |
C11000 |
C1100 |
C101 |
R-Cu57 |
How C11000 Copper Foils Strips For Transformers Winding Are Made?
The C11000 copper foils strips for transformer winding production process we adopt is to roll the pure copper by rolling mill and then anneal, which is a common method.
The annealing is the core of rolling pure copper. The deformation resistance and conductivity of rolled copper foil are closely related to the annealing process. If the annealing process is not good, it will cause the copper foil to be brittle, easy to break and difficult to bend.
The specific steps of production process are as follows:
1) Rolling pure copper into a certain width and thickness of pure copper strip, this step is called cold rolling;
2) Pure copper strip through the annealing furnace, so that the internal organizations of pure copper strips are more uniform, this step is called heat treatment;
3) The electromagnetism effect of the pure copper strip after annealing treatment can be used to further improve its performance. This step is called electromagnetic effect;
4) Foil cutting (slitting): Our workers help cut the coils of copper foils as customer request width;
5) Packaging: Choosing the good quality wooden case for C11000 copper foils strips packaging;
6) Shipment: Our team help you arrange the air freight or sea shipment for delivery.
why choose us

why choose our products
We are a leading manufacturer and exporter specializing in a comprehensive range of high-quality copper products, including copper tubes, copper plates/sheets, copper bars, copper rods, copper wires, and copper strips. Our advanced manufacturing facilities are equipped with state-of-the-art continuous casting lines, extrusion presses, cold rolling mills, and drawing machines to ensure precision and consistency. Rigorous quality control is integral to our process, conducted through spectrometers for material verification, tensile testers, eddy current testers, and hydrostatic pressure testers, guaranteeing that all our products meet international standards for performance and durability.
E-mail: sales@gneesteel.com







