Copper C12000 pipes consist mainly of high-purity copper (99.9% Cu) along with trace elements for improving performance. The pipes display outstanding mechanical properties with a tensile strength of about 200–250 MPa, yield strength of about 50–80 MPa, and elongation of more than 40%, thereby maintaining high ductility. 45–65 HB Brinell hardness with high thermal and electrical conductivity characterizes C12000 copper tubing, and they are well suited for where high corrosion resistance and formability are needed. Their strength and durability make them an industrial, electrical, and plumbing system choice preference.
Copper C12000 Pipe Specifications
| Standard | ASTM B111 / ASTM B75 / ASTM B280 / ASTM B68 / ASME SB111 / ASME SB75 / ASME SB280 / ASME SB68 |
|---|---|
| Material | Copper |
| Outside diameter | 2-914mm |
| Outer Diameter(OD) | 4mm-150mm |
| Wall Thickness : | 0.25mm-8mm |
| Length | 1 meter-6 meter or as required |
| Types | Seamless Pipes, Pipe / Light Drawn Pipe / Light Annealed Pipe / Bright Pipe / Annealed Pipe, Annealed Pipe, Full Annealed Pipe, Hard Drawn Pipes |
| Application | 1. Pancake Coil for ACR, General Engineering Applications 2. LWC Coil for ACR, General Engineering Applications 3. Straight Copper Pipe for ACR and Refrigeration 4. Inner-grooved copper Pipe for ACR and Refrigeration 5. Copper Pipe for Transportation System of water, gas and oil 6. Semi-finished Copper Pipe for industrial applications |
Copper C12000 pipe Chemical Composition
| Grade | Cu | Ph |
| C12000 | Including Ag | 0.004 – 0.012 |
Copper C12000 pipe Mechanical Properties
| Density (lb / cu. in.) | Electrical Resistivity (microhm-cm (at 68 Deg F)) | Melting Point (Deg F) | Mean Coeff Thermal Expansion | Modulus of Elasticity Tension |
| 0.323 | 10.6 | 1981 | 9.4 | 17000 |
Copper C12000 Pipe Thickness Chart
| (mm) | Outside Diameter (mm) |
Table Y Half hard an annealed tube |
Table X Half hard light gauge tube |
Table Z Hard drawn thin wall tube |
|||
|---|---|---|---|---|---|---|---|
| Maximum Working Pressure (N/mm2) |
Thickness (mm) |
Maximum Working Pressure (N/mm2) |
Thickness (mm) |
Maximum Working Pressure (N/mm2) |
Thickness (mm) |
||
| 8 | 8 | 10.5 | 0.8 | 9.7 | 0.6 | 9.8 | 0.5 |
| 6 | 6 | 14.4 | 0.8 | 13.3 | 0.6 | 11.3 | 0.5 |
| 10 | 10 | 8.2 | 0.8 | 7.7 | 0.6 | 7.8 | 0.5 |
| 15 | 15 | 6.7 | 1 | 5.8 | 0.7 | 5 | 0.5 |
| 12 | 12 | 6.7 | 0.8 | 6.3 | 0.6 | 6.4 | 0.5 |
| 18 | 18 | 5.5 | 1 | 5.6 | 0.8 | 5 | 0.6 |
| 28 | 28 | 4.2 | 1.2 | 4 | 0.9 | 3.2 | 0.6 |
| 22 | 22 | 5.7 | 1.2 | 5.1 | 0.9 | 4.1 | 0.6 |
| 35 | 35 | 4.1 | 1.5 | 4.2 | 1.2 | 3 | 0.7 |
| 54 | 54 | 3.6 | 2 | 2.7 | 1.2 | 2.5 | 0.9 |
| 159 | 159.4 | 1.5 | 2 | 1.5 | 1.5 | ||
| 42 | 42 | 3.4 | 1.5 | 3.5 | 1.2 | 2.8 | 0.8 |
| 67 | 67 | 2.8 | 2 | 2 | 1.2 | 2 | 1 |
| 108 | 108.1 | 2.2 | 2.5 | 1.7 | 1.5 | 1.7 | 1.2 |
| 76.1 | 76.2 | 2.5 | 2 | 2.4 | 1.5 | 1.9 | 1.2 |
| 133 | 133.4 | 1.4 | 1.5 | 1.6 | 1.5 | ||
Size Chart Of Seamless Copper C12000 Pipe
| Outside diameter (OD) [in (mm)] |
Nominal size |
Inside diameter (ID) [in (mm)] |
||
|---|---|---|---|---|
| Type L | Type K | Type M | ||
| 1⁄2 (12.7) | 3⁄8 | 0.430 (10.922) | 0.402 (10.211) | 0.450 (11.430) |
| 3⁄8 (9.5) | 1⁄4 | 0.315 (8.001) | 0.305 (7.747) | |
| 2 5⁄8 (66.675) | 21⁄2 | 2.465 (62.611) | 2.435 (61.849) | 2.495 (63.373) |
| 5⁄8 (15.875) | 1⁄2 | 0.545 (13.843) | 0.528 (13.411) | 0.569 (14.453) |
| 7⁄8 (22.225) | 3⁄4 | 0.785 (19.939) | 0.745 (18.923) | 0.811 (20.599) |
| 3⁄4 (19.05) | 5⁄8 | 0.668 (16.967) | 0.652 (16.561) | 0.690 (17.526) |
| 1 1⁄8 (28.575) | 1 | 1.025 (26.035) | 0.995 (25.273) | 1.055 (26.797) |
| 1 5⁄8 (41.275) | 11⁄2 | 1.505 (38.227) | 1.481 (37.617) | 1.527 (38.786) |
| 1 3⁄8 (34.925) | 11⁄4 | 1.265 (32.131) | 1.245 (31.623) | 1.291 (32.791) |
| 2 1⁄8 (53.975) | 2 | 1.985 (50.419) | 1.959 (49.759) | 2.009 (51.029) |
| 3 1⁄8 (79.375) | 3 | 2.945 (74.803) | 2.907 (73.838) | 2.981 (75.717) |
Uses of Copper C12000 pipe
Copper C12000 Pipes have broad applications across various industries due to their superior thermal and electrical conductivity, corrosion resistances, and durability. They are typically used in electrical applications, such as wiring, conductors, and ground systems, to ensure effective power transmission. In the plumbing and HVAC sector, they are used in water distribution, refrigeration, and heat exchangers because of their high thermal performance. Moreover, such pipes are also a must in automobile, aircraft, and marine applications where high-strength, corrosion-resistant materials are needed. Their formability and reliability also suit them well for architectural and industrial uses, providing long-lasting performance in the tough conditions.
Products Description
Products Description
Copper products that GNEE can provide
|
Product name
|
Copper Pipe / Tube
|
|
Round copper pipe
|
Wall thickness: 0.2-120mm
|
|
Outside Diameter: 2mm~910mm
|
|
|
Rectangular copper pipe
|
Wall thickness: 0.2mm~910mm
|
|
Size: 2mm*4mm~1016mm*1219mm
|
|
|
Hardness
|
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc
|
|
Standard
|
GB/T5231-2001.GB/T1527-2006.JISH3100-2006, JISH3250-2006, JISH3300-2006, ASTM-B152M-06, ASTM-B187, ASTM-B75M-02, ASTM-B42-02, ASTM-B370 /ASTM-B152 etc
|
|
Material
|
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800,
C10910,C10920,TP1,TP2,C10930,C11000,C11300,C11400,C11500,
C11600,C12000,C12200,C12300,TU1,TU2,C12500,C14200,C14420,
C14500,C14510,C14520,C14530,C17200,C19200,C21000,C23000,
C26000,C27000,C27400,C28000,C33000,C33200,C37000,C44300,
C44400,C44500,C60800,C63020,C65500,C68700,C70400,C70600,
C70620,C71000,C71500,C71520,C71640,C72200,etc.
|
|
Usage
|
Pressure vessels, Heat exchangers, Cotter, pins, Rivets, Radiators, Gaskets, Roofing, Gutters
|
|
Package
|
Standard export package,suit for all kind of transport,or as required.
|
|
Material |
Copper, Brass, Bronze and special copper alloy |
|
|
Grade |
ASTM |
C10100,C11000,C12200,C21000,C22000,C23000,C24000,C26000, |
|
G/B |
TU1,T2,TP2,H96,H90,H85,H80,H70,H65,H63,H62,H59,HPb63-3, |
|
|
JIS |
C 1011,C 1100,C 1220,C3604,C 2100,C 2200,C 2300,C 2400, C 2600, |
|
|
BS |
Cu-OFE,C 101,Cu-DHP,CZ 125,CZ 101,CZ 102,CZ 103,CZ 106,CZ 107, CZ 108,CZ 109, CZ 123,CZ 124,CZ 121,CZ 111,CZ 133, Pb 104, |
|
|
DIN/ISO |
CuZn5,CuZn10,CuZn15,CuZn20,CuZn30,CuZn35,CuZn33,CuZn36, |
|
|
Shape |
Round, Square, Flat, Hexagon, Oval, Half-round or Customized |
|
|
Dimension |
Bar/Rod |
Standard(Diameter 5-160 mm) or Customized |
|
Wire |
Standard(Diameter 0.02-6 mm) or Customized |
|
|
Plate/Sheet |
Standard(T 0.2-50 mm/W 200-3000 mm/L 6000 mm) or Customized |
|
|
Strip |
Standard(T 0.05-1.5 mm/W 20-600 mm/L 20000 mm) or Customized |
|
|
Tube/Pipe |
Standard(OD 3-360mm/Wall thickness 0.5-50 mm) or Customized |
|
|
Standard |
GB/T,JIS,ASTM, ISO, DIN, BS, NF etc. |
|
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard. |
|
|
Package |
Plastic film + Wooden case or as per customer requirement |
|
|
Surface |
Polished,bright,oiled,hair line,brush,mirror,or as required |
|
|
Deliver time |
According to order's quantity. |
|
|
Shipment |
By sea, by air, DHL, UPS, FedEx etc. or as required |
|
|
Application |
Electric light industry, machinery manufacturing, Building industry ,defense industry, and other fields Manufacturing industrial |
|
|
Product name |
Copper plate |
|||
|
Width |
500-2000mm or as customer request |
|||
|
Thickness |
0.2-120mm or as customer request |
|||
|
Length |
1000-6000mm or as customer request |
|||
|
Processing service |
Welding, stamping, cutting, bending, unwinding |
|||
|
Application |
Widely used in electrical industry, medical equipment, construction, chemical, |
|||
|
Export packing |
Standard Marine packaging or custom packaging |
|||
|
Price Terms |
FOB CIF CFR,or We can also go into detail |
|||
|
Product Name |
Copper Wire |
|
Standard |
AISI, ASTM, BS, DIN, EN, GB, JIS |
|
Diameter |
0.6mm / 0.8mm / 0.9mm / 1.0mm / 1.2mm / 1.6mm |
|
Thinckness |
0.12mm-3.0mm |
|
Cu Content (%) |
99.998% |
|
Alu-Zinc coating |
30-180g/m2 |
|
Material |
C21000,C22000,C22600,C23000,C24000,C26000,C26130,C26800,C27000,C27200,C27400, etc. |
|
Package |
Standard seaworthy export packing:
3 layers of packing, inside is kraft paper, water plastic film is in the middle and outside GI steel sheet to be covered by steel strips with lock, with inner coil sleeve |
|
Certification |
ISO, SGS, CE |
|
Delivery |
8-20 days |
|
Payment Terms |
T/T, LC, Western Union, Paypal, etc. |
|
MOQ |
1 Ton |
copper CNC machined parts
|
Processing |
CNC Turning,CNC Milling,Laser Cutting,Bending,Spining,Wire Cutting,Stamping, Electric Discharge Machining(EDM),Injection Molding,3D Printing,Rapid Prototype,Moulds etc. |
|
Materials |
Aluminum:2000 series,6000 series,7075,5052,etc. |
|
Stainlesss steel:SUS303,SUS304,SS316,SS316L,17-4PH,etc. |
|
|
Steel:1214L/1215/1045/4140/SCM440/40CrMo,etc. |
|
|
Brass:260,C360,H59,H60,H62,H63,H65,H68,H70,Bronze,Copper |
|
|
Titanium:Grade F1-F5 |
|
|
Plastic:Acetal/POM/PA/Nylon/PC/PMMA/PVC/PU/Acrylic/ABS/PTFE/PEEK etc. |
|
|
|
Anodized,Bead Blasted,Silk Screen,PVD Plating,Zinc/NickI/Chrome/Titanium Plating, |
|
Tolerance |
+ / - 0 . 0 1 m m |
|
Surface |
Min Ra 0.1~3.2 |
|
CERTIFICATE |
ISO9001:2015,IOS14001：2015,ROSH. |
Why choose us?
Since our establishment in 2008, our company has specialized in the production and export of copper products. We utilize advanced production lines and a comprehensive quality control system. From raw materials to finished products, every step is rigorously inspected using precision instruments (such as spectrometers, metallographic microscopes, and conductivity testers) to ensure that our products meet international standards for composition, dimensions, and performance. We are committed to providing high-quality, high-precision copper products and reliable service to our global customers.
Email:sales@gneesteel.com
active members
years experience
Square Meters Built
Cooperating Partner
