Gnee Steel (Tianjin) Co., Ltd.

CuAl7Si2 ( CW302G )

Jan 22, 2024

CuAl7Si2 ( CW302G )

CuAl7Si2 ( CW302G )CuAl7Si2 ( CW302G )CuAl7Si2 ( CW302G )

Grade : CuAl7Si2
Number: CW302G
Classification: Copper-aluminium alloy
Density 7.7 g/cm ³
Standard: EN 12163: 1998 Copper and copper alloys. Rod for general purposes
EN 12167: 1998 Copper and copper alloys. Profiles and rectangular bar for general purposes
EN 12165: 1998 Copper and copper alloys. Wrought and unwrought forging stock
EN 12420: 1999 Copper and copper alloys. Forgings
Equivalent grades: No information

 



Chemical composition % of grade CuAl7Si2 ( CW302G )

Fe Si Mn Ni Al Pb Zn Sn Others -
max 0.3 1.5 - 2.2 max 0.2 max 0.2 6.3 - 7.6 max 0.05 max 0.5 max 0.2 total 0.2 Cu - remainder



Mechanical properties of grade CuAl7Si2 ( CW302G )

 

Rm - Tensile strength (MPa) (R500) 500
Rm - Tensile strength (MPa) (R600) 600

 

Rp0.2 0.2% proof strength (MPa) (R500) 250
Rp0.2 0.2% proof strength (MPa) (R600) 350

 

A - Min. elongation at fracture (%) (R500) 20
A - Min. elongation at fracture (%) (R600) 12

 

Brinell hardness (HB): (H120)(R500) 120 - 150
Brinell hardness (HB): (H140)(R600) 140

 



Casting process

GS Sand casting
GM Permanent mould casting
GZ Centrifugal casting
GC Continuous casting
GP Pressure die casting



Material conditions

R Material condition designated by the minimum value of tensile strength requirement for the product with mandatory tensile strength and elongation requirements
H Material condition designated by the minimum value of hardness requirement for the product with mandatory hardness requirements



Mechanical properties

ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc
 

CuAl7Si2 ( CW302G ) Copper-aluminium alloy
Chemical composition. Equivalents of CuAl7Si2 ( CW302G ).
Standards.1 Mechanical Properties. Hardness

goTop