Gnee Steel (Tianjin) Co., Ltd.

H68 Brass Tube

Feb 05, 2026

What is H68 brass?

H68 brass tube is a metal pipe primarily made of copper-zinc alloy, designated as H68 C2680, conforming to the GB/T 1527-1997 standard. It is the most widely used variety among common brasses. Its chemical composition consists of 67.0% to 70.0% copper, with the remainder being zinc, and contains trace amounts of lead, phosphorus, and iron. It is primarily used in water supply pipelines, as well as heating and cooling pipeline installation projects.

 

This tube material possesses good plasticity and relatively high strength, offers excellent machinability, and is easy to weld. At room temperature, its tensile strength is ≥295 MPa, and its elongation is ≥38%. Its physical properties include resistance to high temperatures (copper melting point 1083°C), high pressure, and freeze-thaw impact. However, while it shows good stability against general corrosion, it is prone to stress corrosion cracking. The product forms include pressed or drawn seamless tubes. Common applications cover various industrial scenarios such as electrical appliances, refrigeration, high-pressure resistance, and corrosion resistance. Heat treatment specifications include a hot working temperature of 750~830°C and an annealing temperature of 520~650°C. The weight calculation formula is 0.02670 × wall thickness × (outer diameter - wall thickness).

Get H68 Brass Spec Sheet

Designation and Standard

The grade of H68 brass tube is H68, with the corresponding unified numerical code C2680. Its production complies with the GB/T 1527-1997 standard.

 

Chemical Composition

The chemical composition of H68 brass tube is primarily copper and zinc, specifically: Copper (Cu) content: 67.0%–70.0%; Zinc (Zn): balance; Lead (Pb) ≤0.03%; Phosphorus (P) ≤0.01%; Iron (Fe) ≤0.10%; Antimony (Sb) ≤0.005%; Bismuth (Bi) ≤0.002%; Total impurities ≤0.3%.

H68 brass for electrical connectors
H68 brass alloy composition
H68 brass sheet supplier
High precision H68 brass strip manufacturer

The density of H68 brass is approximately 8.9 g/cm³.

Heat treatment specifications: Hot working temperature 750~830°C; Annealing temperature 520~650°C; Low-temperature stress relief annealing temperature 260~270°C.

Theoretical weight can be calculated using the formula: (Outer radius² × π × length × density (8.9)/1,000,000) - (Inner radius² × π × length × density (8.9)/1,000,000).

 

Mechanical Properties

Tensile strength: ≥295 MPa.

Elongation: ≥38% or ≥43%.

Note: Room temperature longitudinal mechanical properties of the tube.

Sample dimensions: Nominal outer diameter 3–60 mm.

 

Production Process

H68 brass tubes are mainly produced through precision seamless tube processes. Product forms include capillary tubes. Common outer diameter ranges exist, such as from Φ0.8mm to Φ200mm, or 3mm to 150mm, and 30mm to 400mm, among other specifications.

 

Application Fields

Construction and HVAC: Used in water supply pipelines, and heating and cooling pipeline installations.

Refrigeration Equipment: Serves as connecting tubes for refrigeration equipment.

Industrial Manufacturing: Can be used as complex cold-stamped and deep-drawn parts, such as bellows. Also used for manufacturing structural parts on electrical appliances, marine thermal equipment, propellers, water tank straps, water supply and drainage pipes, etc.

Get Dedicated Engineer Support

Our factory

Our factory is equipped with an advanced full-process copper processing production line, specializing in the manufacturing of high-precision copper plates, copper tubes, copper rods, copper wires, and copper strips. The core of our production includes continuous casting and rolling units, precision extrusion lines, high-speed cold rolling equipment, multi-roll precision rolling mills, tube drawing systems, and intelligent stretching production lines. We are also outfitted with comprehensive inspection equipment such as spectrometers and online eddy current flaw detectors, ensuring full-process control from smelting and casting, hot processing, to cold finishing. Our products achieve an accuracy of up to ±0.01mm, with an annual production capacity exceeding 50,000 tons. They are widely used in power, electronics, transportation, and high-end manufacturing sectors. Certified with international standards such as ISO9001 and IATF16949, we are capable of providing global customers with one-stop copper material solutions.

H68 brass rod stock wholesale

 

Brass product packaging

We implement a graded and customized packaging system: copper plates are double-wrapped with moisture-proof paper and vapor corrosion inhibitor film before being placed in reinforced wooden crates, which are filled with cushioning materials and equipped with impact-resistant corner protectors; copper tubes and rods are sealed with plastic end caps, wrapped with PE protective film, and then layered into steel-frame logistics containers, with EPE pearl cotton separating each layer; copper wires are automatically wound onto spools, vacuum-sealed, covered with waterproof film, and secured on customized iron-wood pallets; copper strips are wrapped with non-woven fabric, coiled onto high-strength steel cores, and placed into waterproof composite material coils with desiccants inside. All packaging passes ISTA-3A transport testing, and the outer boxes are labeled with international hazardous material identifiers, moisture warnings, and scannable logistics codes, ensuring the cargo withstands moisture, impact, and chemical erosion during global transportation.

H68 brass tube for heat exchanger

Get Fast Quote & Logistics Plan

 

goTop