Gnee Steel (Tianjin) Co., Ltd.

The meaning and application of Chinese copper and copper alloy status codes

Apr 11, 2024

The meaning and application of Chinese copper and copper alloy status codes

info-288-175info-275-183info-275-183

According to the provisions of the standard GB/T 29094-2012 copper and copper alloy status expression method: the copper and copper alloy status expression method is divided into three levels.

01

First level status

The first-level status is represented by a capital English letter, which represents the basic production method of the product. The first-level status is expressed as follows:

M: Manufacturing status. Applies to the state obtained by primary manufacturing by casting or hot working.

H: Cold working state. It is suitable for states obtained by different cold working methods and controlling the amount of deformation.

O: Annealing state. It is suitable for the state obtained by changing the mechanical properties or grain size requirements of the product through annealing.

T: heat treatment status. It is suitable for the state obtained by solution heat treatment or solution heat treatment followed by cold working or heat treatment.

02

Second and third level status

Add an Arabic numeral or a capital English letter after the first-level status to indicate the second-level status, which represents the product function or specific production process.

Add 1 to 3 Arabic numerals after the second-level state to indicate the third-level state, which represents the final shaping method of the product.

1. The second and third level state representation method of manufacturing state (M) is as follows:

Secondary status code:

M0 - cast state; M1 - hot forging; M2 - hot rolling; M3 - hot extrusion; M4 - hot piercing

Level three status code:

Add Arabic numerals 1~8 after M0; add 0 and 1 after M1; add 0 and 5 after M2; add 0 and 5 after M3; add 0 and 5 after M4.

M0: M01 - sand casting; M02 - centrifugal casting; M03 - gypsum mold casting; M04 - pressure casting; M05 - metal mold casting (permanent mold casting); M06 - investment casting; M07 - continuous Casting; M08 - low pressure casting

M1: M10 - hot forging - air cooling; M11 - hot forging - quenching;

M2: M20 - hot rolling; M25 - hot rolling + re-rolling;

M3: M30 - hot extrusion;

M4: M40 - hot piercing; M45 - hot piercing + re-rolling

Note 1: Castings and heat-processed products are mainly supplied in the as-manufactured state and generally do not require further heat treatment.

Note 2: The first number after M increases with the degree of material deformation.

2. Method of expressing the second and third level states of cold working state (H):

Generally, the second and third-level states of cold working are divided into two representation methods: the cold working state based on the amount of cold deformation and the cold working state based on the strength level.

1). The expression method of the second and third level cold working states based on the cold deformation meeting the standard requirements is as follows:

Secondary status code:

H0--hard and elastic; H1--high elasticity

Level three status code:

Add Arabic numerals 0~6, 8 after H0, and add 0, 2~4 after H1;

· H0: H00--1/8 hard; H01--1/4 hard; H02--1/2 hard; H03--3/4 hard; H04--hard; H06--extra hard; H08--elastic

H1: H10 - high elasticity; H12 - special elasticity; H13 - higher elasticity; H14 - super high elasticity

Note: This type of status applies to product types such as plates, strips, rods, and wires.

2). The expression method of the second and third level cold processing status based on meeting the standard requirements of special products:

H5 - drawing; H6 - cold forming; H7 - cold bending; H8 - hard drawing; H9 - special-shaped cold processing

H5: H50 - hot extrusion + drawing; H52 - hot piercing + drawing; H55 - light drawing, light cold processing; H58 - conventional drawing;

H6: H60 - cold forging; H63 - riveting; H64 - spinning; H66 - stamping

H7: H70--cold bending

H9: H90 - fin forming

Note 1: Products supplied in the above condition generally do not require further heat treatment.

Note 2: The first number after H increases with the degree of material deformation.

3. The second and third-level states of heat treatment after cold working are as follows:

HR - cold working + stress relief; HT - cold working + ordered strengthening; HE - cold working + end annealing

· HR: HR01 - 1 / 4 hard + stress relief; HR02 - semi-hard + and stress relief; HR04 - hard + and stress relief; HR06 - extra hard + and stress relief; HR08 - elastic + and stress relief Elimination; HR10 - High Elasticity + and Stress Relief; HR12 - Special Elasticity + and Stress Relief; HR50 - Drawing + Stress Relief; HR90 - Fin Forming + Stress Relief

HT: HT04 - hard + ordered strengthening; HT08 - elastic + ordered strengthening

HE: HE80 - hard drawn + end annealed

4. Method of expressing the second and third level states of annealing state (O):

The second and third levels of annealing state (O) are divided into two representation methods: annealing to meet the nominal average grain size and annealing to meet mechanical properties.

1). Method of expressing the second and third-level annealing states that meet the nominal average grain size:

OS - annealing with grain size requirements. The three digits added thereafter divided by 1000 are the nominal average grain size in mm; for example:

The nominal average grain size of OS005 is 0.005mm

The nominal average grain size of OS200 is 0.2mm

2). Method of expressing the second and third-level annealing states that meet the mechanical properties:

O1 - cast + heat treatment; O2 - hot forging + heat treatment; O3 - hot extrusion + heat treatment; O4 - hot piercing + heat treatment; O5 - quenching and tempering annealing; O6 - annealing; O7 - complete Soft annealing; O8 - annealed to specific properties

O1: O10--casting + annealing (homogenization); O11--casting + precipitation heat treatment

O2: O20--hot forging + annealing; O25--hot rolling + annealing

O3: O30--hot extrusion + annealing; O40--hot extrusion + precipitation heat treatment

O5: O50 - light annealing

O6: O60--softening annealing; O61--annealing; O65--drawing annealing; O68--deep drawing annealing

O7: O70 - fully softened and annealed

O8: O80 - annealed to 1/8 hard; O81 - annealed to 1/4 hard; O82 - annealed to 1/2 hard

5. The second and third level state expression method of heat treatment state (T):

1). Secondary state code of heat treatment state (T):

TQ - quenching hardening; TB - solid solution heat treatment; TF - solid solution heat treatment + precipitation heat treatment; TX - solid solution heat treatment + metastable decomposition heat treatment; TD - solid solution heat treatment + cold working; TH - solid solution heat treatment + cold working + precipitation heat treatment; TS - cold working + metastable decomposition heat treatment; TL - precipitation heat treatment or metastable decomposition heat treatment + cold working; TR - precipitation heat treatment or metastable decomposition heat treatment + cold working + stress relief; TM - processing waste heat Quench hardening

2). The third-level status code of heat treatment status (T):

Add two Arabic numerals after the secondary status code, as shown below:

TQ: TQ00 - quenching hardening; TQ30 - quenching hardening + annealing; TQ50 - quenching hardening + tempering annealing; TQ55 - quenching hardening + tempering annealing + cold drawing + stress relief; TQ75 - intermediate quenching

TB: TB00 - solid solution heat treatment

TF: TF00 - solid solution heat treatment + precipitation heat treatment; TF01 - precipitation heat treatment plate - low hardening; TF02 - precipitation heat treatment plate - high hardening

TX: TX00 - precipitation heat treatment plate - high hardening

The two Arabic numerals added after the secondary status codes TD, TH, TS, TL, TR, and TM indicate the degree of cold work hardening. 00 means 1/8 hard; 01 means 1/4 hard; 02 means 1/2 hard. ; 04 represents hard; 06 represents extra hard; 08 represents elasticity; 10 represents high elasticity; 12 represents special elasticity; 13 represents higher elasticity; 14 represents ultra-high elasticity.

Examples of the two-digit numbers, third-level status codes and names added to these second-level status codes are as follows:

Two Arabic numerals are added after TD, which are 00, 01, 02, 03, 04, and 08, and their three-level status codes and names, such as TD00 - solid solution heat treatment + cold working (1/8 hard); TD08 - solid solution Heat treatment + cold working (elasticity)

Such as TH03 - solid solution heat treatment + cold working (3/4 hard) + precipitation heat treatment

Add two Arabic numerals after TS: 00, 01, 02, 03, 04, 06, 08, 10, 12, 13, 14, and the third-level status code and name, such as TS14 - cold processing (super high elasticity) + metastable decomposition hardening

Two Arabic numerals are added after TL: 00, 01, 02, 04, 08, 10, and the third-level status code and name, such as TL10 - precipitation heat treatment or metastable decomposition heat treatment + cold working (high elasticity)

Add two Arabic numerals 01, 02, 04 after TR, and its third-level status code and name, such as TR01 - precipitation heat treatment or metastable decomposition heat treatment + cold working (1/4 hard) + stress relief

Add two Arabic numerals 00, 01, 02, 03, 04, 06, 08 after TM, and its third-level status code and name, such as TM02 - processing waste heat quenching + cold working (1/2 hard)

6. Method of expressing the second and third level status of welded pipe status (W):

After welding and refining processing (re-annealing, re-cold working), the welding area has become a processed structure, and a general status code can be used. Such status representation methods are code-named O, OS, and H respectively according to the specific conditions after refinement.

Secondary status code and name of welded pipe status (W):

WM - welding state; WO - annealing state after welding; WC - light cold processing after welding; WH - cold drawing state after welding; WR - welded pipe + cold drawing + stress relief

Add two Arabic numerals after the second-level status code to become the third-level status code. The following are the third-level code names and names: the two-digit Arabic numerals mentioned above are 00, 01, 02, 03, 04, 06, 08, and 10 respectively. Indicates the hardened state, which applies here.

The two Arabic numerals added after TM are: 50, 00, 01, 02, 03, 04, 06, 08, 10, 15, 20, 21, 22, 24. Examples of the three-level status codes and names are as follows:

TM50 - welded by annealed strip; TM00 - welded by 1/8 hard strip; TM15 - welded by annealed strip + stress relieved;

TM20 - welded by 1/8 hard strip + stress relief; TM21 - welded by 1/4 hard strip + stress relieved;

TM22 - welded by 1/2 hard strip + stress relief; TM24 - welded by 3/4 hard strip + stress relieved

The two Arabic numerals added after WO are: 50, 60, and 61. The third-level status codes and names are as follows:

WO--welding + light annealing; WO60--welding + soft annealing; WO61--welding + annealing

The two Arabic numerals added after WC are: 55, its third-level status code and name WC55 - welding + light cold processing

The two Arabic numerals added after WH are: 00, 01, 02, 03, 04, 06, 55, 58, 60. Examples of their third-level status codes and names are as follows:

WH00 - welding + drawing (1/8 hard); WH55 - welding + cold rolling or light drawing; WH58 - welding + cold rolling or conventional drawing; WH80 - welding + cold rolling or hard drawing

The two Arabic numerals added after WR are: 00, 01, 02, 03, 04, 06. Examples of their third-level status codes and names are as follows:

WR00 - made of 1/8 hard strip welded + drawn + stress relieved; WR06 - made of extra hard strip welded + drawn + stress relieved

goTop