Gnee Steel (Tianjin) Co., Ltd.

Surface Modification Of Titanium Rods And Wires

Jun 13, 2025

Titanium rods and wires at high temperatures are easy to react with elements such as O, H, N and other elements in the air and embedded material in the Si, AL, Mg and other elements in the formation of surface contamination layer on the surface of the casting, so that its excellent physical and chemical properties deteriorate, hardness, plasticity, elasticity, brittleness increases.
Titanium rods and titanium wire density is small, so the flow of titanium liquid inertia is small, molten titanium mobility is poor resulting in low casting flow rate. Casting temperature and casting temperature difference (300 degrees), cooling fast, casting in a protective atmosphere, titanium casting surface and the internal surface and inevitably have defects such as porosity, the casting quality has a great impact.
Therefore, the surface treatment of titanium rods and titanium wire is more important compared with other titanium products, due to the unique physical and chemical properties of titanium wire, such as small thermal conductivity, surface hardness, and low modulus of elasticity, viscosity, low conductivity, easy to oxidise, etc., these surface treatment of titanium has brought great difficulty, the use of conventional surface treatment methods is difficult to achieve the most satisfactory results. Special processing methods and operating means must be used.

Titanium Round RodTitanium Round Barround bar titanium

The surface modification of titanium rods and wires are mainly: nitriding, anodising, atmospheric oxidation, etc..
1. Nitriding: the use of plasma nitriding, multi-arc ion plating, ion implantation and laser nitriding and other chemical heat treatment technology, the formation of a gold-coloured TIN plating layer on the surface of titanium denture, so as to improve titanium abrasion resistance, corrosion resistance and fatigue resistance. However, the technology is complicated and the equipment is expensive, so it is difficult to achieve the surface modification of titanium denture to be clinically practical.
2. Anodic oxidation: the anodic oxidation of titanium rods is easier, in some oxidising media, under the action of applied voltage, titanium anode can form a thicker oxide film, thus improving its corrosion resistance and wear resistance, weather resistance. The electrolyte for anodic oxidation generally adopts H2SO4 and acid aqueous solution.
3. Atmospheric oxidation: titanium rods in the high temperature atmosphere can form a thicker solid anhydrous oxide film, the overall corrosion of titanium, interstitial corrosion are effective, the method is relatively simple.

 

We can provide high quality products, good service and competitive price. We have been committed to producing high quality titanium products such as titanium tubes, titanium wires, titanium plates, titanium strips, titanium rods and other titanium products.

Mob:+8615824687445

E-mail: sales@gneesteel.com

Skype: mmkelly1314

Whatsapp/Wechat: +86 15824687445

rod titanium

goTop